Bids Are invited for Amc Of Airfield Ground Lighting

Sharing tender

Bids Are invited for Operation And Maintenance Of Electrical And Mechanical Installations Ref Atc Pg.No Soq 1 To 6 - Job Contract For Operation, Preventive And Breakdown Maintenance Of Various Electrical And Mechanical Installations, Such As Airport Ground Lighting, Old Power House, Nav-Aids And Ancillary Building, Fire Detection And Alarm System At Thoothukudi Airport As Detailed On The Tender Document On Round The Clock Basis / As Per Need Basis In Line With The Requirements Indicated In The Tender Document And As Required Including Providing Tools And Tackles, Consumables, Annual Calibration Of Measuring Instruments Complete Etc As Detailed In The Special Conditions/Technical Specification Of The Contract. , Items Under Electrical And Mechanical Dsr 2025 As Per Requirement Ref Atc Pg.No Soq 1 To 6 - Execution Of Items Of Schedule Of Rates E And M Cpwd Dsr-2025 As And When Required For Attending Breakdowns, Repair And Maintenance And Upkeep Of Internal And External Electrical Installations At Different Locations Of Thoothukudi Airport As Per Direction Of E-I-C. The Bidder Shall Quote Percentage (Percentage) Above / Below The Dsr 2025 Rates In The Form Of Multiplication Factor. I.E. (For Eg - If The Bidder Desires To Quote 5Percentage Above On Dsr 2025 Rates, The Rate Column Shall Be Filled As 1.05 And 5Percentage Below, The Rate Column Shall Be Filled As 0.95). (Note Dsr-2025 Is Inclusive Of Gst). , Installation Of Ci Housing Box Ref Atc Pg.No Soq 1 To 6 - Installation Of Ci Housing Box Along With Cover Plate Of Size 330 Mm Dia And Depth Up To 450 Mm As Per Drawing I/C Excavation Of Hard Rock/Pavement Of All Types/ Concrete/Bitumen Etc. And All Kinds Of Soil To The Required Depth, As Per Specifications, Refilling The Side Surface, Sloping And Making Good The Same As Original, Providing Cement Concrete Foundation Of Ratio 136 ( 1 Cement, 3. Coarse Sand And 6 Graded Stone Of 40 Mm Nominal Size) And Thickness Of Concrete At 75 Mm In All Sides I/C Bottom Dressing Of Earth, With Brick And Finishing With 13 Mm Thick Cement Plaster Of Ratio 13 On Exposed Surface And Neat Cement Finishing On Top Etc. As Required. , Laying Of Hdpe Pipe Upto 63Mm Dia In Ground Ref Atc Pg.No Soq 1 To 6 - Laying Of One Number Hdpe /Pvc Pipe Upto 63Mm Dia Direct In Ground Upto Depth Of 80Cm Including Excauation And Refilling, Leveling Etc., , Drawing Of Agl Cables Of 6 Or 16Sqmm Cable Ref Atc Pg.No Soq 1 To 6 - Drawing Of Agl Cables Of 6/16 Sq.Mm Size Of Cable In Hdpe/Gi/Hume Pipe , Annual Servicing Of 22Kv 3 Nos Of Ht Breakers Vcb Ref Atc Pg.No Soq 1 To 6 - Servicing Of 22Kv, 3 Nos Of Ht Breakers (Vcb) (Abb Make Model Vd4/W 36.12.32, 36Kv,1250A Vcb) Provided At Various Power Houses/Substations, By Deploying Authorized Service Personnel Of Manufacturer / Service Dealer / Specialized Service Engineers Experienced In Similar Nature Of Work, Including Drawing Out Of The Vcb, Opening The Same, Inspection, Servicing, Cleaning Of Contact Surfaces, Overhauling Of Operating Mechanism, Lubrication Of Moving Parts, Cleaning Of Cts And Measuring Of Contact Resistance, Meggering, Testing Of On-Off Time, Testing And Of Operation Etc. As Required. ( Servicing Of Three Breaker Is Considered As One Job) , Annual Servicing Of 13 Nos Of L And T Acbs Ref Atc Pg.No Soq 1 To 6 - Annual Inspection /Overhauling/Servicing Of 13 Nos Acbs Of L Andt Make Of Various Capacities (Acbs Make L Andt,Model Omega ( U-Power ) Fp, 2000A-3 Nos, 1250 A-10 Nos ) Provided In The Various Lt Panels At Old Powerhouses/Substations By Deploying Authorised Service Personnel Of Manufacturer/Service Dealer/Specialised Agencies Experienced In Servicing Of Acbs Including Cleaning Of Acbs, Opening The Same, Inspection, Servicing, Cleaning Of Contact Surfaces, Arc Chutes, Overhauling Of Operating Mechanism, Lubrication Of Moving Parts, Checking Of Uv Coils, Trip Circuits, Checking Of Control Circuits, Replacement Of Defective Components And Spares Supplied By Aai, Testing And Commissioning Etc As Required. , Main Contact Assembly Fixed And Moving For 1600A Omega Model Acbs Ref Atc Pg.No Soq 1 To 6 - Main Contact Assembly (Fixed Moving) For 1600A Acbs , Main Contact Assembly Fixed And Moving For 1250A Omega Model Acbs Ref Atc Pg.No Soq 1 To 6 - Main Contact Assembly (Fixed And Moving) For 1250A Acbs , Shunt Release Operating Voltage Of 240V For Omega Model Acbs Ref Atc Pg.No Soq 1 To 6 - Shunt Release Suitable For Operating Voltage Of 240V For L And T Make Omega Model Acb , Closing Coil 240V For L And T Make Omega Model Acb Ref Atc Pg.No Soq 1 To 6 - Closing Coil 240V For L And T Make Omega Model Acb , Electrical Charging Device For L And T Make Omega Model Acb Ref Atc Pg.No Soq 1 To 6 - Electrical Charging Device For L And T Make Omega Model Acb , Cradle Facia For 1250A L And T Make Omega Model Acb Ref Atc Ref Atc Pg.No Soq 1 To 6 - Cradle Facia For 1250A L And T Make Omega Model Acb , Spring Charging Handle L And T Make Omega Model Acb Ref Atc Ref Atc Pg.No Soq 1 To 6 - Spring Charging Handle L And T Make Omega Model Acb , Front Facia For 1250A L And T Make Omega Model Acb Ref Atc Ref Atc Pg.No Soq 1 To 6 - Front Facia For 1250A L And T Make Omega Model Acb , Frame 1, 4P Main Mechanism For 1250A L And T Make Omega Model Acb Ref Atc Pg.No Soq 1 To 6 - Frame 1, 4P Main Mechanism For 1250A L And T Make Omega Model Acb , Base Plate Assembly Frame 4P For 1250A L And T Make Omega Model Acb Ref Atc Pg.No Soq 1 To 6 - Base Plate Assembly Frame 4P For 1250A L And T Make Omega Model Acb , Under Voltage Release 415V For L And T Make Omega Model Acb Ref Atc Pg.No Soq 1 To 6 - Under Voltage Release 415V For L And T Make Omega Model Acb , Annual Calibration Of 1 No Clinometer And 1 No Angle Setting Tools Ref Atc Pg.No Soq 1 To 6 - Annual Calibration Of 1 No Clinometer (Model Pro3600) And 1 No Of Approach Light Fittings Angle Setting Tool From Oem (M/S Vardhaman Pvt. Ltd., Delhi), Including Transportation, Calibration Certificate, And All Incidental Charges. (Calibration Of 2 Nos Of Meters Is Consider As One Job ) , Annual Calibration Of8 Nos Over Current Relay And Earth Fault Relay Ref Atc Pg.No Soq 1 To 6 - Annual Calibration Of 8 Nos Of Over Current Relay And Earth Fault Relay (Make C Ands, Model No. Ec2), Including Transportation, Calibration Certificate, Testing, And All Incidental Charges. (Calibration Of 8 Nos Of Relay Is Consider As One Job ) , Annual Calibration Of 3 Nos Feeder Protection Relay Ref Atc Pg.No Soq 1 To 6 - Annual Calibration Of 3 Nos Of Feeder Protection Relays (Make C Ands Model No. Cse Pro F-300) ), Including Transportation, Testing,Calibration Certificate, And All Incidental Charges. (Calibration Of 3 Nos Of Relay Is Consider As One Job ) , Conducting Photometric Field Test Of Airfield Ground Lighting Ref Atc Pg.No Soq 1 To 6 - Conducting Photometric Field Test Of Airfield Ground Lighting For Measurement Of Intensity, Beam Spread And Orientation (4Cs - Configuration Colour,Candala And Coverage )As Per The Requirement Of Car/Icao(Annexure-14)Using A Vehicle-Mounted Or Suitable Photometric Calibration System, Including All Tools And Plants Such As Vehicle, High Lift For Elevated Approach Lights And Trained Manpower Etc As Required And Submission Of Test Reports. , Servicing And Repairing Of 16 Mtr High Mast Pole Ref Atc Pg.No Soq 1 To 6 - Servicing And Repairing Of High Mast Poles Of The Following Sizes , Including Dismantling,Lowering And Raising Of The Mast With A Crane Of Suitable Capacity, Cleaning, Greasing/Oiling Of Moving Parts, Replacement Of Damaged Parts Excluding Motors Gear Assembly , Testing, And Making The High Mast System Functional, Complete As Directed By The Engineer-In-Charge. (The Rate Is Exclusive Of Supply Of Cable And Rope .) 16Mtrs High Mast Make Dyaus Poles , Servicing And Repairing Of 20 Mtr High Mast Pole Ref Atc Pg.No Soq 1 To 6 - Servicing And Repairing Of High Mast Poles Of The Following Sizes , Including Dismantling,Lowering And Raising Of The Mast With A Crane Of Suitable Capacity, Cleaning, Greasing/Oiling Of Moving Parts, Replacement Of Damaged Parts Excluding Motors Gear Assembly , Testing, And Making The High Mast System Functional, Complete As Directed By The Engineer-In-Charge. (The Rate Is Exclusive Of Supply Of Cable And Rope .) Servicing And Repaiting Of 20 Mtr High Mast Pole Ref Atc , Servicing And Repairing Of 30 Mtr High Mast Pole Ref Atc Pg.No Soq 1 To 6 - Servicing And Repairing Of High Mast Poles Of The Following Sizes , Including Dismantling,Lowering And Raising Of The Mast With A Crane Of Suitable Capacity, Cleaning, Greasing/Oiling Of Moving Parts, Replacement Of Damaged Parts Excluding Motors Gear Assembly , Testing, And Making The High Mast System Functional, Complete As Directed By The Engineer-In-Charge. (The Rate Is Exclusive Of Supply Of Cable And Rope .) Servicing And Repaiting Of 30 Mtr High Mast Pole , Supply Of 6 Corex 2 Sqmm Epr Insulated Copper Cable Ref Atc Pg.No Soq 1 To 6 - Supply Of 6 Core X 2.5Sqm Epr Insulated ,Frls Pvc Sheated , Flexible Copper Cable Of 1.1Kv Grade , Supply Of 5 Core X 4 Sqmm Epr Insulated Copper Cable Ref Atc Pg.No Soq 1 To 6 - Supply Of 5Corex 4Sq.Mm Epr Insulated ,Frls Pvc Sheated , Flexible Copper Cable Of 1.1Kv Grade , Supply Of 6Mm Dia Ss Wire Rope Ss 304 7 X 19 Ref Atc Pg.No Soq 1 To 6 - Supply Of 6 Mm Dia Ss Wire Rope Ss 304 7 19 Construction Suitable For High Mast Lighting Systems, Including Unloading, And All Incidental Charges Etc. As Required , Repairing Of High Mast Motor Gear And Winch Assembly Ref Atc Pg.No Soq 1 To 6 - Repairing Of High Mast Motor Gear And Winch Assembly, Including Dismantling At Site, Safe Transportation To The Repair Workshop, Inspection, Repair Replacement Of Defective Components Reassembly, Transportation Back To Site, Re Installation, Alignment, Testing, Commissioning, And Satisfactory Operation Of The High Mast Lighting System. , Providing Decorative Lighting At Terminal Building Garden Etc Ref Atc Pg.No Soq 1 To 6 - Hire Charges For Providing Coloured Led Serial Lighting Sets (Minimum 500 Nos And Each Consisting Of Minimum 50 Nos Of Led L S), 50 Nos Of 150Wattage Rgb Led Par Light Etc For Decorating Terminal Building, Technical Building, City Side Areas Etc During Events Or Occasions Like Independence Day / Republic Day /Other Festive Occasions As Per The Direction Of Aai Including All Other Related Accessories Like Circuit / Sub Main Wiring Along With Earth Wire From Nearest Supply Point As Required And Maintaining The Same By Deploying Suitable Manpower With Tools, Tackles, Ladders Etc On Round The Clock Etc Complete As Per Actual Site Requirements, Removing And Taking Back The Same After Completion Of Occasion Period. (One Event Is Taken As 3Days,Which Will Treated As 1 Job) , Extra For Additional Days For Providing Decorative Lighting Ref Atc Pg.No Soq 1 To 6 - Extra For Each Additional Day Of Illumination With Same Lighting As Previous Items , Painting Of Electrical Ht Or Lt Panels With Synthetic Enamel Paint Ref Atc Pg.No Soq 1 To 6 - Painting Of Electrical Ht/Lt Panels (Indoor/Outdoor Types), Earth Pit Covers Etc Installed At Various Locations Of Thoothukudi Airport, With Two Or More Coats Of Spray Painting With Synthetic Enamel Paint Of Approved Brand (As Per List Of Approved Makes Annex-Lam) To Give An Even Shade, Including Cleaning Of Surface Etc, Applying One Coat Primer Of Required Color As Per The Instruction Of Engineer-In-Charge Complete As Required. , Painting Of Electrical Ht Or Lt Panels With Epoxy Primer Ref Atc Pg.No Soq 1 To 6 - Painting Of Electrical Ht/Lt Panels (Indoor/Outdoor Types), Installed At Various Locations Of Thoothukudi Airport, With One Coat Of Spray Painting With Epoxy Primer Of Approved Brand(As Per List Of Approved Makes Annex-Lam) To Give An Even Shade, Including Cleaning Of Surface Using Scrubber/Wet/Dry Sandpaper Etc, As Per The Instruction Of Engineer-In-Charge Complete As Required. , Painting Of Existing Runway Edge Lights Turn Pad Taxiway Light Ref Atc Pg.No Soq 1 To 6 - Painting Of Existing Runway Edge Lights,Turn Pad/ Taxiway Light With Base Plate. Cleaning The Existing Runway Edge Light Fittings By Removing Dust, Dirt, Rust, Grease, And Loose Paint. Surface Preparation Shall Be Carried Out Two Coats Of Aviation Yellow, Weather-Resistant Epoxy Paint Of The Approved Colour. Care Shall Be Taken To Ensure That The Light Lens, Optical Components, Gaskets, And Identification Markings Are Not Painted Or Damaged. The Work Shall Include Masking, Touch-Up, Cleaning Of The Work Area, And Restoration Of The Fitting To Its Original Operating Condition, Complete In All Respects As Directed By The Engineer-In-Charge. (Runway Elevated Edge Light -193 Nos, Taxiway/Turn Pad Edge Light -258 Nos ) , Painting Of Existing Elevated Approach Lights Ref Atc Pg.No Soq 1 To 6 - Painting Of Existing Elevated Approach Lights,Cleaning The Existing Approach Light Fittings By Removing Dust, Dirt, Rust, Grease, And Loose Paint. Surface Preparation Shall Be Carried Out Two Coats Of Aviation Yellow, Weather-Resistant Epoxy Paint Of The Approved Colour (As Per List Of Approved Makes Annex-Lam). Care Shall Be Taken To Ensure That The Light Lens, Optical Components, Gaskets, And Identification Markings Are Not Painted Or Damaged. The Work Shall Include Masking, Touch-Up, Cleaning Of The Work Area, And Restoration Of The Fitting To Its Original Operating Condition Including Working Arrangements In Fitting At Height Upto 11 Mtr Suitable For The Cat-I And Sapl Approach Lights As Installed In The Thoothukudi Airport, Complete In All Respects As Directed By The Engineer-In-Charge. , Numbering Of Agl Light Fixtures Ref Atc Pg.No Soq 1 To 6 - Numbering Of Agl Light Fixtures (Runway Circuits, Taxiways, Approach Lights, And Threshold Lights) Shall Be Carried Out With Yellow Letters On A Black Background Using Floor Guard Paint And Stencil, As Per The Directions Of The Engineering In-Charge , Hiring Of Electrical And Diesel Operated 2 Hp Pumps Ref Atc Pg.No Soq 1 To 6 - Hiring Of Following Rating Of Electrical/Diesel Operated Submersible / Monoblock / Selfprimed Pumps With Suction And Delivery Hose Including Transportation And Fuels Charges , Labour Charges Etc As Required 2Hp Pump , Hiring Of Electrical And Diesel Operated 3 Hp Pumps Ref Atc Pg.No Soq 1 To 6 - Hiring Of Following Rating Of Electrical/Diesel Operated Submersible / Monoblock / Selfprimed Pumps With Suction And Delivery Hose Including Transportation And Fuels Charges , Labour Charges Etc As Required 3Hp Pump , Hiring Of Electrical And Diesel Operated 5 Hp Pumps Ref Atc Pg.No Soq 1 To 6 - Hiring Of Following Rating Of Electrical/Diesel Operated Submersible / Monoblock / Selfprimed Pumps With Suction And Delivery Hose Including Transportation And Fuels Charges , Labour Charges Etc As Required 5Hp Pump , Hiring Of Hydraulic Telescopic Boom Mobile Crane Ref Atc Pg.No Soq 1 To 6 - Hiring Of Hydraulic Telescopic Boom Mobile Crane (Minimum 32 M Boom With Fly Jib) On Hourly Basis, Complete With Licensed Operator, Valid Third-Party Inspection (Tpi) Safety Certificate, Helper/Rigger, Fuel (Hsd), Lubricants, Mobilization And Demobilization, Maintenance, Insurance, All Statutory Compliances, Airport Entry, Temporary Driver Pass, Vehicle Pass, And All Other Incidental Charges, Complete As Directed By The Engineer-In-Charge. , Hiring Of Wheel Mounted Hydraulic Backehoe Loader Ref Atc Pg.No Soq 1 To 6 - Hiring Of Wheel-Mounted Hydraulic Backhoe Loader (Jcb 3Dx Or Equivalent) On Hourly Basis For Excavation, Site Clearance, Loading, Unloading, Backfilling, And Allied Works, Complete With Licensed Operator, Fuel (Hsd), Lubricants, Maintenance, Insurance, Mobilization/Demobilization, Airport Entry Temporary Driver Pass, Vehicle Pass, And All Other Statutory Permissions, Taxes, And Incidental Charges, Complete As Directed By The Engineer-In-Charge. , Hiring Of Unskilled Labours As Per Requirement Ref Atc Pg.No Soq 1 To 6 - Hiring Of Unskilled Labour , Providing And Deploying Unskilled Labour On An As-And-When-Required Call Basis To Meet Fluctuating Site Requirements, Within 24 Hours Of Written Or Verbal Notice By The Engineer-In-Charge. The Labour Shall Be Deployed For Manual Tasks Including Site Cleaning, Material Handling, And Construction Assistance. One Quantity Is Considered On Deploying One Man Power For 8 Hours.