Tender For General-Kip Sbc Shutter Work-Action Plan Work 2026-27-Supply, Fabrication And Erection Of New Shutter And Providing New Hoisting Mechanism At Edakkadu-I Shutter At Ch:14934 M Of Sbc-General Mechanical Work
Tender Value
1.42 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
17 days left
EMD
3569
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathanamthitta → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Kip Sbc Shutter Work-Action Plan Work 2026-27-Supply, Fabrication And Erection Of New Shutter And Providing New Hoisting Mechanism At Edakkadu-I Shutter At Ch:14934 M Of Sbc-General Mechanical Work
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old damaged shutters, embedded parts and its hoisting mechanism- Supply Fabrication erection of new embedded parts and allied civil work etc. |
| 2 | OD35490/2025-2026:Clearing grass from banks of channel and removal of silt, zoological waste & debrisfrom canal bed, removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared including conveyance charges |
| 3 | OD35546/2025-2026:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Unit / Embedded parts etc. of the same and stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by the departmental officer at the site.(weight of the unserviceable shutters and embedded parts may be calculatedas 60% and unserviceable hoisting units as 80 % ) |
| 4 | 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 6 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 8 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 10 | OD35489/2025-2026:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 11 | OD35487/2025-2026:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 12 | OD35488/2025-2026:Supply of MS round bar including cost of conveyance charges |
| 13 | OD35491/2025-2026:Fabrication and errection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories asper approved specifications, drawings and directions of deptl fficer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of materialalready supplied |
| 14 | Supply, Fabrication , Painting & erection of Shutter and Hoisting units |
| 15 | OD35498/2025-2026:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 16 | OD35496/2025-2026:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 17 | OD35501/2025-2026:Supply of MS round bar including cost of conveyance charges |
| 18 | OD35502/2025-2026:Fabrication of Structural steel canal shutters ( Up to 2 tonne weight )/ Hoisting bridge/ Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied |
| 19 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 20 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 21 | OD35499/2025-2026:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the canal gates including cost of MS bolts and nuts, all labour and machinery and incidental and conveyance chargers complete as per approved specification or drawing. |
| 22 | OD35497/2025-2026:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of MS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings |
| 23 | OD35500/2025-2026:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform< including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and liftcharges etc complete but excluding cost of materials already supplied |
| 24 | Supply and fixing of Nut hoisting mechanism including Screw rod and conducting trail run etc. for shutter |
| 25 | OD35493/2025-2026:Providing base and nut arrangement for hoisting the shutter including cost of allmaterials labor etc complete |
| 26 | OD35494/2025-2026:Providing EN-8 screw rod 7.50 tonne capacity 4.00M lift screw hoist having onenumber of EN-8 screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operationincluding cost of all materials, labour, hire charges and conveyance. |
| 27 | OD35492/2025-2026:Supply of M.S bolt and nuts |
| 28 | OD24826/2026-2027:Conveying manually the fabricated shutter (upto 1 tonne weight&max conveyance distance upto 100m) and other materials from road side to site. |
| 29 | OD35495/2025-2026:Trial run the gate with its hoisting mechanism etc. including cost of all materials,machinery , labour, all lift and lead, incidental and conveyance charges etc. as per instruction ofdepartmental officers in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender