Tender For Construction Of Prefab Structure To Be Used As Revenue Record Room (Second Floor) At D.C Office Complex, Jammu
Tender Value
22.65 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
7 days left
EMD
45300
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Prefab Structure To Be Used As Revenue Record Room (Second Floor) At D.C Office Complex, Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Provision for d-assembling and re-assembling of the steel almirahs of Godrej make along with the railing channels from desired site to requisite site. Complete job along with hardware provisions (30 No's Appx.) |
| 2 | Providing and fixing of panels for wall and roof. The roof shall be provided 30mm thick puff insulated panel make Sintex or 0.50m thick precoated precoloured sheets. The roof sheet are laid over a frame work of trusses and purlins and rafters fixed using suitable fasterers. A 0.50mm precoated/ precoloured steel sheets ridge cover of 0.40mm from the eves wall and 0.30mm from the gable wall. The wall shall be made in sandwich panel systsm using 2No's of precoated precoloured sheets of 0.50mm thick fitted fitted with 50mm thick puff with bulk density of 40kg/cum. The puff panels shall be make Sintex/Llyod/Jindal continuous panel system. The panels shall be inserted one by one in \\"U\\" shaped ground track of size 52.5x35x1.25mm thick made from G.I sheet/sheet coil. The bottom track shall be fixed to the concrete platform level by suitable fasteners screwed on the PVC expandable screw cap. The top of the walls would be concealed with \\"U\\" shaped top track of size52.5x35x1.25mm thick made from G.I sheet/sheet coil. The roof shall be 1:4 approximately as per seismic Zone -IV. The walls height shall be 3Mts at eves and 3.36 Mts at centre gable including all electric work including ,ceiling lights 2'x2', wall fans,sockets,switch boards and all other necessary electric items approved by Engineer-in-Charge complete job. The \\"Make\\" of the items shall be as per ISI certification and shall be got approved from the Engineer-in-Charge. (Details of windows and doors and other items as per drawings and necessity at site) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work above plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc |
| 6 | Structural steel work rivted and bolted in built up section trusses and frame work incl. cutting, hositing, fixing in position and applying a priming coat of approved steel primer all complete |
| 7 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 8 | Providing and laying Full body Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 9 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 10 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.150 mm diametre |
| 11 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 150 mm gap for thermal expansion. Bend 87.5° 110 mm bend |
| 12 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Floor Trap 150 mm bend |
| 13 | NOTE:- a)The whole work/complete job includes making of architectural and vetted structural drawings by IIT/NIT/DIQC etc. by taking in consideration the specification mention above before start of the work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender