Tender For Water-Proofing And Repair Of Girls Hostel Roof Including Supply And Installation Of Water Storage Tanks And Allied Works (Including Repair Of Drainage System) At Govt, Polytechnic For Women, Jammu
Tender Value
38.62 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
8 days left
EMD
77240
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Water-Proofing And Repair Of Girls Hostel Roof Including Supply And Installation Of Water Storage Tanks And Allied Works (Including Repair Of Drainage System) At Govt, Polytechnic For Women, Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying Expansion joint over RCC Slab/Roof consisting of following steps : a.) Opening of Old joint using Grinder machine. (b.) Finishing & Repairing the edges using rich Cement Mortar 1:3 (1 cement : 3 Fine sand) and cleaning off all dirt and unwanted material (c.) Filling of Expansion joint ( Size = 2\\" thick & 2\\" to 4\\" av. width) with 2\\" thick superior quality thermocol followed by 2\\" thick polysulphide based expansion joint sealant of approved brand by Engineer-in-charge.(d.) fixing of 15\\" wide GI sheet 0.50mm th. with 75mm long gun metal Anchor bolts @ 12\\" c/c over brick masonry wall with plaster in 1:4 mix (9\\" thick) of 1 feet or required height upto height of five floor level Inclusive of all Material, scaffolding, labour cost, carriages and disposal of unwanted material within a lead of 50 mtrs. |
| 2 | Providing and laying Expansion joint over RCC columns/walls consisting of following steps : a.) Opening of Old joint using Grinder machine. (b.) Finishing & Repairing the edges using rich Cement Mortar 1:3 (1 cement : 3 Fine sand) and cleaning off all dirt and unwanted material (c.) Filling of expansion joint ( Size = 12\\"-14\\" deep & 2\\" to 4\\" av. width) with 2\\" to 4\\" width and 10\\"-12\\" deep superior quality thermocol followed by 2\\" thick polysulphide based expansion joint sealant of approved brand by Engineer-in-charge. (d.) fixing of 9\\" wide GI sheet 0.50mm th. with 75mm long gun metal Anchor bolts @ 12\\" c/c over RCC columns/walls. upto height of five floor level Inclusive of all Material, scaffolding , carriages, labour cost and disposal of unwanted material within a lead of 50 mtrs. |
| 3 | Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints : 300 mm wide |
| 4 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring: 110 mm diametre |
| 5 | Engaging Plumber for minor repairing works, removing and re-fixing of water storage tanks after water proofing etc. |
| 6 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 7 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 8 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. |
| 10 | 40mm nominal outer dia pipes. |
| 11 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 40 mm nominal bore |
| 12 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 13 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 14 | Hostel roof Water Tanks Stand on Terrace Angle Iron : 40x40x6 MM |
| 15 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. 20mm nominal bore, 120mm long, weighing not less than198gms. |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) : 25 mm dia. Nominal. |
| 17 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore. |
| 18 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases for columns. |
| 20 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 21 | Disposal of mulba beyond municipal limits(10 km avg. lead) |
| 22 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws : 35 MM |
| 24 | Engaging Sweeper for Cleaning/Clearing of Drains,waste water pipes,toilet pipes,Toilet seat waste PVC pipes,Man-holes and other un-hygenic materials etc. including its disposal at designated place. |
| 25 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge: 1:4:8 or leaner mix (i/c equivalent design mix) |
| 26 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). |
| 27 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. |
| 28 | (i) Single socketed pipes : 110 mm diametre |
| 29 | (ii) Single socketed pipes : 150 mm diametre |
| 30 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. |
| 31 | Single tee with door : 110x110x110 mm. |
| 32 | Single tee without door :110x110x110 mm. |
| 33 | Single tee with door : 150x150x150 mm. |
| 34 | Single tee without door :150x150x150 mm. |
| 35 | Bend 87.5° -110MM Dia. |
| 36 | Bend 87.5° -150MM Dia. |
| 37 | Labour engaging for dismantling/removing of GI pipes,Orissa pan seats , European type Water closets, sanitary fittings, taps cleaning of Toilet floors including cost of detergent etc. |
| 38 | Engaging Carpenter for repairing & refixing of existing door,windows etc. |
| 39 | Engaging Plumber for repairing works etc. |
| 40 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead .For thickness of tiles 10 mm to 25 mm |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles of size 300 mm x 600 mm conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.All carriages and cost of material included. (make Kajaria,Johnson or Equivalent). |
| 42 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown. |
| 43 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall: |
| 44 | 15 mm dia. nominal bore |
| 45 | 20 mm nominal outer dia pipes |
| 46 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) : 25 mm dia. nominal bore. |
| 47 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe 40mm. |
| 48 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead : With cement mortar 1:4 (1 cement : 4 fine sand). |
| 49 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 50 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 51 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 52 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 53 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 54 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 55 | Providing and fixing CP waste Coupling |
| 56 | Providing and fixing PVC Waste pipe |
| 57 | Providing and fixing CP Soap case. |
| 58 | Providing and fixing of CP Grating-4\\" |
| 59 | Providing and fixing 15mm dia 2\\"- 3\\" long CP nipples. |
| 60 | Providing and fixing PVC connection pipe upto 24\\" long. |
| 61 | Providing and fixing CP Towel Rod |
| 62 | Providing and fixing CP Towel Ring |
| 63 | Providing and fixing looking Mirror. |
| 64 | Providing and fixing of Steel Shelf of Superior quality |
| 65 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 66 | Providing & applying two coats of water proofing compound of approved brand on walls including cleaning and preparation of surface as per direction of Engineer-in-Charge. |
| 67 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 68 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter. |
| 69 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 70 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. : One coat |
| 71 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 72 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design. All around PVC pipe : |
| 73 | 100 mm diameter PVC pipe |
| 74 | 150 mm diameter PVC pipe |
| 75 | Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead. |
| 76 | Provision for Disassembling of Solar Panels before water proofing of terrace installed over the roof , keeping in safe place and assembling of same using necessary nuts bolts etc. after water proofing, All job to be done by Specialized technicians in proper professional manner .complete job without causing any damage. |
| 77 | Providing and laying two coats of water proofing material of approved brand and manufacture on walls and roof surface upto the satisfaction of site engineer. (i) First coat shall be applied in the ratio of 1:1 (1 liter 301 Dr. Fixit URP or equivalent brand and 1 kg of cement with paint brush. (ii) Second coat shall be applied in the ratio of 1:1.5 ( 1 liter 301 Dr. fixit URP or equivalent brand and 1.5 kg of cement with paint brush. |
| 78 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. |
| 79 | Grading roof for water proofing treatment with cement mortar 1:3 (1 Cement : 3 coarse sand) |
| 80 | Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 81 | Providing and laying in situ five course water proofing treatment with APP (Atactic Poly Propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film, 5th top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 Fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). |
| 82 | Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 83 | Carriage of Sand, stone aggregate below 40 mm nominal size(Mechanical) by head load for an avg. lead of 10 km. |
| 84 | Sand & Stone Aggregate-below 40mm nom. size (average lead 10.00 kms) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender