Tender For Tender For Construction Of New Tps Room For Radiation Oncology Block At Thanjavur.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Sep 2026
13 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Construction Of New Tps Room For Radiation Oncology Block At Thanjavur.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of wall |
| 2 | Brick masondry in cement morter walls unter 3 m height |
| 3 | Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 4 | Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Supplying and filling of well gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the dept., officers with standard specification |
| 6 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 10 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 7 | Providing and laying in position , standardised concrete mix M-25 grade in accordance using 20mm with IS:456-2000 ,and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350kg/ms and maximum water cement ratio of 0.5, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate , retard setting of concrete , improve workability without impairing strength and durability with about 5 cu.m 7730 kg of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7676kg of sand but excluding cost of reinforcement grill and fabricating charges , centering and shuttering and also including laying , vibrating with mechanical vibrators, finishing , curing, etc. and providing fixtures like fan clamps in the RCC floor/roof slabes wherever necessary without claiming extra , etc complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No seperate payment will be made by the department for the excess usage of materials). |
| 8 | For Foundation & basement |
| 9 | For Ground Floor upto 4.50m height |
| 10 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) |
| 11 | For Rectangular beam, slab, waist slab, landing slab, lintel and ball other plain surfaces etc., complete |
| 12 | For column footing plinth beam bed blocks templates staircase, steps piers raft beam raft slab etc., |
| 13 | For square or rectangular column boxing top and bottom slab |
| 14 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 15 | Brick work in following Cement Mortar using 1:5best quality of class designation Flyash Brick of size 230x110x70mm conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc.,complete complying with standard specification. Brickwork shall be done adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 16 | Foundation & Basement |
| 17 | For ground floor upto 4.50m height |
| 18 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 19 | Special ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, stair case stpes, landing slabs etc with C.M. 1:3 (One cement and three sand) 10 mm thick including hacking the surfaces necessary CM nosing, beading as per size specified wherever necessary using the same mix etc., complete complying with standard specification and as directed by the departmental oficers etc., complete |
| 20 | Providing Screed concrete of the following thickness with plain cement concrete 1:2:4 (One Cement, Two M-sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 21 | Paving the Top of Roof with Solar Reflective Ceramic Tiles ( Required Design ) of 305x305x7mm thick of approved quality and colour laid in Cement Mortar 1:3 ( One Cement and Three M-sand ) 12mm thick and pointed with tile grout ( Nitotile Grout or equivalent ) and cement in the ratio of 1:3 for joint, curing etc., Complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works). |
| 22 | Painting the exterior wall surface with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including through scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental officer (the colour and quality should be got approved by the Executive Engineer before use) |
| 23 | Flooring with Double Charged Vertified Tiles of size 600 x 600 x 8 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 24 | Providing pre construction antitermite treatment using approved chemicals as per IS 6313 part 2 of 1981. The rate shall include all materials and labour for preparing the area for treatment, spraying antitermite chemical solution for foundation before laying foundation. Spraying of termicide (0.5%) concentrate solution to the grade beam level and brick masonry in in contact with back fill earth. Spraying termicide solution on sand for the flooring before laying the concrete. The treatment should be carried out on the sand filling in basement after leveling operation over making crow bar holes at 30cm intervals to a depth of 23cm in the outer periphery of the building on chemical poured inside the holes and closed after treatment. |
| 25 | Supplying and fixing casement door fabricated from UPVC (Un-Plasticized Polyvinyl Chloride) section.The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The unit should be designed wit all corner joints mitred and fusion welded. It should ne reinforced with 25x24x25mm steel reinforcement with a thickness of 1mm to have dimension stability. The sash should be of 60x102mm. The mullion should be of 60x74mm. The profile should have co-extruded seals. Hardware: All the hardware like friction stays, Handles should be screwed with self tapping screws.The handles, locks should be designed so that they cannot be released from outside. Glazing: The system should be glazed with 5mm plain floar glass/6mm bison lam. Installation: The profile should be cut to length and welded 45 degrees. The Door should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 26 | Dadooing walls with following best approved quality, Stain free Nano Polish Vertified tiles of size 600 x 600 x 8mm in Cement Mortar 1:2 (One Cement and Two sand) 8mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 27 | Constructing rain water harvesting pit of size 1.5 x 1.5 x 1.2 m with necessary earth work, sand filling 10 cm thk, pcc 1:5:10 10 cm thk, brick work allround 9\\" thk of size 1 x 1 x 1.2 m and necessary inner and outer plastring with cm 1:5 12 mm thk, and filling with filter media 30 cm thk of sand, coarse aggregate and rcc cover slab 20 mm thk., excluding cost of reinforcement |
| 28 | Supplying and fixing in position best approved quality of PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. (a) 110mm dia. |
| 29 | Supplying and fixing of MS Lader height of 7.2m length using main frame 50 x 50 x 6 mm (4.7kg/m) L angle and footrest in 35 x 35 x 3mm L angles at the interval of 30 cm center to center and necessary handrails in 50mm dia ms pipe at suitable supports from the main frame and suitabe painting, includes cost of materials, lobour charges, fixing charges, fabrication charges, etc all complete. |
| 30 | Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level |
| 31 | Medium back cushion rolling chair with seat & back made of molded cushion, hydraulic type and mateal base. The rate is inclusive of cost of mateirals, transport, hardware, labour charges. |
| 32 | Wooden table made of commercial ply of 18mm thick and laminated both side in top, one side with drawer/cupboard, another side with 3 drawer, keyboard etc, size 2.5' (H) x 4' (L) x 2'(W). The rate is inclusive of cost of mateirals, transport, hardware, labour charges. |
| 33 | Providing supplying and fixing of Strorage includes shtter, made of 18mm commercial ply with all side laminate finish, visible edges with edge banding wherever required. The rate is inclusive of cost of mateirals, transport, hardware, labour charges. |
| 34 | Supply and installation of 2.0 TR capacity 3 star rated energy efficient Hi wall mounting Split type Air Conditioner unit consisting of out door condensing unit complete with hermetically sealed Air compressor with R 22 refrigerant air cooled condenser, fan etc., and 1No Indoor Hi wall mounted 2.0 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc, with 3 metre copper refrigerant piping and chord wire connecting indoor and out door unit with drain pipe suitable for operation on 230V+ 10% 50 HZ single phase AC supply.The rate is inclusive of the stabilizer(Make: Carrier/Equ) |
| 35 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End |
| 36 | supply and fixing of 18W LED Round type Recessed fitting with LED (Lower end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting.(SD-444) |
| 37 | Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting |
| 38 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan 5 star rated complete (Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on existing fan clamp |
| 39 | Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour |
| 40 | Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) |
| 41 | Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) |
| 42 | Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with acrylic door cover with IP42 protection with 1 No 63A 4P MCB as incoming and 18 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only. (Make: Hager/ Legrand) |
| 43 | Supply and run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion |
| 44 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour |
| 45 | Supply and laying of 4C X 16 Sqmm round flexible cable with necessary connections |
| 46 | Dismantling, shifting and re-fixing of existing electrical installations, equipment, cables and accessories from the existing TPS room to a suitable alternate location, wherever required, in connection with the proposed construction of new TPS room, including necessary dismantling, transportation, reconnection, testing and commissioning, complete as directed by the Assistant Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender