Power Boards / Undertakings / PSU Closing in 13 days TDR #57546349

Tender For Nctps-Ii-M-I Circle-Ca-Cwph- Unit-Ii- Tws 2F-Inspection Of Travelling Water Screens 2F Boot Section Assembly By Complete Dismantling Of Basket Trays & Chain Link Plates, Dewatering The Fore Bay & Tws Chamber, Fabricating Water Screen Frame

Issued by Boards / Undertakings / PSU · Thiruvallur, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Sep 2026
13 days left
EMD
8700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Nctps-Ii-M-I Circle-Ca-Cwph- Unit-Ii- Tws 2F-Inspection Of Travelling Water Screens 2F Boot Section Assembly By Complete Dismantling Of Basket Trays & Chain Link Plates, Dewatering The Fore Bay & Tws Chamber, Fabricating Water Screen Frame Steel & Guide Plates Of Boot Section And Fixing, Reassembling Intact And Satisfactory Commissioning As And When Required.

BOQ

Name of Work:- NCTPS-II-M-I Circle-CA-CWPH- Unit-II- TWS 2F-Inspection of Travelling water screens 2F boot section assembly by complete dismantling of basket trays & chain link plates, dewatering the fore bay & TWS chamber, fabricating water screen frame steel & guide plates of boot section and fixing, reassembling intact and satisfactory commissioning as and when required.
Sl. No. Item Description
1Charges for inspecting the TWS chamber for locating & identifying the detached guide ring and damaged water screen frame steel at the boot section of TWS structure located in the '-12' Mtr depth inside the TWS chamber using compressor for air blasting with Deep sea diver with oxgen cylinder including cost of consumables and hire charges for T&P's, such as, air compressor, Diving regulator, diving spins, cylinder regulator, diving mask, diving dress, weight belt, manila rope, etc., in the fore bay of CWP.
2Charges for dismantling and cutting the screen basket including cost of consumables and T&P's hire charges etc.,
3Charges for lifting of chain link assembly from -12 mtrs to O mtrs and inspection suitably rectification including cost of consumables and T&P's hire charges etc.,
4Charges for removing of wheels and plumber block from shaft and inspection suitably rectification including cost of consumables and T&P's hire charges etc.,
5Charges for assembling of wheels and plumber block with shaft including cost of consumables and T&P's hire charges etc.,
6Charges for lifting and shifting the boot section from O mtrs to -12 mtrs including cost of consumables and T&P's hire charges etc.,
7Charges for maintaining water level cutting the links plates and both boot section and head frame side and removal of head mouting including cost of consumables and T&P's hire charges etc.,
8Charges for removal of baskets with link plate from suction tunnel and dismantling of basket,shim plate,link plate,nylon roller ,bushes spacers etc., including cost of consumables and T&P's hire charges etc.,
9Charges for connecting of link plates and fixing of head shaft sprockets and assembly of all basket check plate with link plates and checking and commisssioning including cost of consumables and T&P's hire charges etc.,
10Charges for cleaning the one side of stop log gate guide plate & wall grooves such as mollusks,marine growth from '0' Mtr forebay floor to '-12' Mtr depth on stop log gate guide plate and grooves using compressor for air blasting with deep sea diver with oxgen cylinder including cost of consumables and hire charges for T&P's such as air compressor,diving regulator,diving spins, cylinder regulator,diving mask,diving dress,weight belt,manila rope etc., in the fore bay of CWPs
11Charges for cleaning the stop log gate bottom seating area guides and seating plates such as mollusks,marine growth at -12 Mtr depth of stop log gate guide plate and grooves using compressor for air blasting with deep sea diver with oxgen cylinder including cost of consumables and hire charges for T&Ps such as air compressor ,diving regulator,diving spins, cylinder regulator,diving mask, diving dress,weight belt,manila rope, etc., in the fore bay of CWPs.
12Charges for arresting the sea water passing/ seepage in stoplog gate sealing area while dewatering,the leakage should be arrested with suitable material including cost of consumables and hire charges for T&P's such as air compressor,diving regulator, diving spins, cylinder regulator, diving mask, diving dress,weight belt, manila rope etc., in the fore bay of CWPs.
13Labour charges for lowering the dewatering pump in the suction forebay dewatering slurry, cleaning and lifting the dewatering pumps including hire charges for dewatering pump, discharge hose, foot valves for dewatering the pump chamber including cost of consumables and T&P's hire charges.
14Charges for scaffolding arrangements inside the the pump forebay chamber,travelling water screen chamber and pump suction chamber of cooling water pump from' -12'mtr to '-3'mtr including cost consumables and lift & lead etc.,
15Charges for de-watering and inspection of TWS chamber.This work involves arranging of dewatering pump,connection of suction and discharge piping with necessary fittings from the nearest source including hoses, closely mointoring the water level in the chamber and inspection as direct by site incharge which includes hire charges of pump, accessories,T&Ps, consumables etc., (Pump capacity-5 HP)
16Charges for scrapping of mollusks,burnacles and marine growth floor base in the chamber from stoplog gate to suction chamber, accumulating the mollusks at one place and disposing the same from '-12'mtr to '0' mtr level and away from the work location as per direction of site incharge including the cost of lighting,hire charges for tractor,lead,lift, safety appliances such as cum boot,hand gloves, masks, sanitary items,consumables,T&P's complete.
17Charges for cutting and removal of worn out/damaged semi circle shaped guide rings on which roller travels at the boot section of water screen frame , sizing, bending as per original profile released, fabrication of new guide ring and welding in position including cost of consumables and T&P'etc., (Necessary material will be supplied by TNPGCL at free of' cost )
18Charges for fabrication and bending of 10 mm thick MS plate for required shape to the extent of 3 Mtrs height for water screen frame column at the boot section including cost of consumables and T&P'etc., (Necessary material will be supplied by TNPGCL at free of cost )
19Charges for cleaning the entire surface of water screen frame column with sand/shot blasting and three coats of painting with a total dry film thickness (DFT) of 190 to 225 Microns i.e.painting with one coat of zinc phosphate epoxy primer (60-70 microns), two coats of epoxycoal thar paint including cost of epoxy primer,coal tharpaint and epoxy thinner including hire charges for T&P's and cost of consumables etc., Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57546349
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 30-09-2026
Authority
Authority Name Tamil Nadu Generation And Distribution Corporation Limited
Work Description Tender for Nctps-Ii-M-I Circle-Ca-Cwph- Unit-Ii- Tws 2F-Inspection Of Travelling Water Screens 2F Boot Section Assembly By Complete Dismantling Of Basket Trays & Chain Link Plates, Dewatering The Fore Bay & Tws Chamber, Fabricating Water Screen Frame Steel & Guide Plates Of Boot Section And Fixing, Reassembling Intact And Satisfactory Commissioning As And When Required.
Basic Detail
Tender No NCTPS_II_UII_Spec_69_26_27
Bidding Type Tender
Location
City Thiruvallur
State Tamil Nadu
Key Dates
Publish Date 16 Sep 2026
Submission Date 30 Sep 2026
Open Date 01 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 8700
Exemption Available
Document List
58e30147-9848-4081-a223-4902701963d4.html
BOQ_847546.xls
Tendernotice_1 (20).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Oct 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
html

58e30147-9848-4081-a223-4902701963d4.html

xls

BOQ_847546.xls

pdf

Tendernotice_1 (20).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders