Tender For .Repair And Maintenance Work At Tlm Office Motiijheel, Gwalior.
Tender Value
7.86 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
5 days left
EMD
16000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for .Repair And Maintenance Work At Tlm Office Motiijheel, Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earthto be levelled and neatly dressed.(No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 2 | Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | Providing and laying in position cement concreteof specified grade excluding the cost of centeringand shuttering - All work upto plinth level :With 20mm nominal size graded stone aggregateM-7.5 Nominal (Mix-1 Cement : 4 sand : 8 gradedstone aggregate ) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete :..M-20 Grade Concrete |
| 5 | Reinforcement for R.C.C. work includingstraightening, cutting, bending, placing inposition and binding including cost of bindingwire all wastages and overlaps, couplers.etc Thermo - Mechanically treated bars (TMT/TMX) FE 500 or more conforming to IS 1786 |
| 6 | Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 7 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stoneaggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design..Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be notless than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks. |
| 8 | Providing and laying factory made chamfered edgeCement Concrete paver blocks in footpath, parks,lawns, drive ways or light traffic parking etc. of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658- 2006 made by table vibratory method using PU mould,laid in required colour and pattern over 50mm.. etc60 mm thick C.C. paver block of M-35 grade |
| 9 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the materialwithin 50 metres lead of: G.S. Sheet |
| 10 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 11 | 15 mm cement plaster on the rough side of single or half brick wall of mix1:6 (1 cement : 6 sand |
| 12 | Providing and applying white cement based putty of average thickness 1 mm,of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labourand scaffold etc in all position complete. Note : Putty shall be applied only on theinternal walls, for application on theexterior walls prior permission of Chief Engineer will be required. |
| 13 | Finishing walls by any mechanical o manual means with Premium AcrylicSmooth exterior paint (Premium exterior) of required shade including allscaffolding. New work (Two or morecoat applied @1.67ltr/10sqm over and including one coat undiluted exteriorwaterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) |
| 14 | Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound)content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. |
| 15 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7… etc. |
| 16 | Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm.… etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender