Tender For Certain Repair To Otm And Md Accn Pertains To B1 And B2 Area Of Age B/R-Ii Under Ge (W) Jrc
Tender Value
45 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Repair To Otm And Md Accn Pertains To B1 And B2 Area Of Age B/R-Ii Under Ge (W) Jrc
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed . |
| 2 | S&F 4mm thick of size 600x600mm HSPC (high pressure steam cured) pre-primetred self embossed textured designer E-clasic board to be fixed to GI powder coated grid/section size 600x600with main runnder 38mm x 24mm x 0.9mm and wall angle 19mm x 0.9mm and duly suspended with 4mm dian GI bar hangers @1200mm centre to centre bothways fixed with steel dash fasteners or from purling/roof with alignment clip incl providing provn for light fixtures of any size, complete all as specified and directed . |
| 3 | S&F false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content not less than 2% humidity resistance of 99%. NRC 0.50 to 0.75 as per IS 8225: 1987, non-combustible as per BS 476 (Part-4)- 1970 and light refletance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross- T size from 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasterners, 6 mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length-3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. The work shall be carried out as per specifications, drawing and as per directions. |
| 4 | S&F 5mm thick PVC hollow wall/ceiling paneling plain/ coloured/ printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement, colour and pattern as approved, complete all as specified and directed. |
| 5 | Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification given on page 162 of SSR-2010 Part-II for solid PVC wall lining including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 6 | Dismantling of Brick tiles or terracing tiles, single layer on roofs, complete all as specified and directed . |
| 7 | Demlition of Mud in roof , any thickness , including plastering and leeping (whether full thickness removed or a part thereof, complete all as specified and directed . |
| 8 | M&L for roughening surfaces of old/concrete floor by backing sweeping clean and washing down with water etc, complete all as specified and directed . |
| 9 | M&L for PCC padding 1:2:4, type B-1(using 20 mm garded stone aggregate) as in roof padding in specified slope, complete all as specified and directed . |
| 10 | M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:4, using WPC, complete all as specified and directed . |
| 11 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, over a coat of hot blown bitumen 85/25 @ 1.20 kg/Sqm, complete all as specified and directed . |
| 12 | M&L for 40 mm thick brick tiles laid over and including cement mortar 1:6 and joints grouted flush in CM 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and directed . |
| 13 | All as per item No. 12 above but except tiles, complete all as specified and directed . |
| 14 | M&L for flush pointing to brick tiles, laid flat in cement mortar 1:3, complete all as specified and directed . |
| 15 | M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, benching etc. rounded or chamfered on edges, complete all as specified and directed . |
| 16 | M&L for applying two coats of aluminium paint over laid APP surface after proper cleaning complete all as specified and directed. |
| 17 | Demolition cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed . |
| 18 | M &L for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:(i) Application of Two component acrylic modified cementitious coating(aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:-(bb) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO.(dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet.(ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area.(gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat.(hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces three sides including dismantiling of existing tiles.(jj) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.(kk) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645.(ll) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP.(mm) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations.(nn)Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE.(ii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent.(iii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around.(iv) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40mm stone aggregate) complete all as specified.(v) Providing drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long ) including cutting to existing wall and making good the disturbed surface complete all as specified and directed.(vi) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified. Note:-Item No 25 (iv) ,(v) &(vi) shall be measured and paid seprately. |
| 19 | M&L Cement concrete 1:5:10 type E-2 (using 40mm stone aggregate) as in sunken flooring complete all as specified. |
| 20 | S&F drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall (Approx 450mm to 600 mm long ) including cutting to existing wall and making good the disturbed surface complete all as specified and directed. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed . |
| 22 | M&L for 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded stone aggregate) as in flooring, finished even and rough to receive the topping layer, complete all as specified and directed . |
| 23 | M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed . |
| 24 | All as per item No 23 above but in vertical surfaces such as skirtings, dados and risers to steps etc, laid over and including 10mm thick cement plaster in CM 1:4, complete all as specified and directed . |
| 25 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, laid over and including15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed . |
| 26 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm, in floors etc, laid over and including15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed . |
| 27 | M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match , complete all as specified and directed . |
| 28 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed . |
| 29 | M&L for Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed base in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, treating the surface with bees wax polish, complete all as specified and directed . |
| 30 | M&L for kota stone slab 20-25mm thick in riser of steps, skirtings, dado and pillar, laid over and including 15mm thick cement screed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, treating the surface with bees wax polish, complete all as specified and directed . |
| 31 | Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed . |
| 32 | Taking down chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames), complete all as specified and directed . |
| 33 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each |
| 34 | Taking down shutters of any description not exceeding 1 Sqm but not exceeding 2 sqm each and refixing in same position after easing, adjusting and repairing, complete all as specified and directed . |
| 35 | S&F solid PVC frame as in door, of size 50mm x47mm made out of 5mm plain colour PVC PVC sheet reinforced with M.S. Square tube a, suppyling & fixing in opening as per specification & drawing, complete all as specified and directed . |
| 36 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed . |
| 37 | S & F pressed steel frames 125x60mm as per IS for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including PCC 1:5:10, type B0 (20mm aggregate) filling in steel frame complete all as specified |
| 38 | All as per item no. 37 above but 105x60mm size. |
| 39 | S&F factory made 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed . |
| 40 | S&F factory made 2nd class HW 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed . |
| 41 | S&F for 35mm thickness of factory made flush shutter solid core construction with block board core & ply wood face panels, commercial type on both side including 35 x 6 thick 2nd class Hard wood lipping on edge, complete all as specified and directed. |
| 42 | Supply & fix factory made steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. |
| 43 | All as per item No 42 and above but window with glazed shutter. |
| 44 | S&F mild steel work as in as in grill gratings etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed. |
| 45 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 MM comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 46 | S&F factory made 18mm thick 100% Solid WPC ( Wood polymer Composite ) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors and Cabinets. |
| 47 | M&L for 19/20mm PVC cupboard shutter one side with decorative choice lamination and other side balancing white lamination, fixed with screws toframed work including fixing arrangement, complete all as specified and directed . |
| 48 | S&F 18mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work, complete all as specified and directed . |
| 49 | S&F mild steel continuous (piano) hinges,40 width of flaps (when open), bright finish or electrogalvanised, complete all as specified and directed . |
| 50 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished |
| 51 | S&F 50 X 15 mm size magnet door catcher for closing for PVC shutter/cupboard complete as specified and directed. |
| 52 | S&F 100 mm size MS mat / glossy finish handle complete as specified and dirceted. |
| 53 | S&F auto hinges for cabinet case (Make-KARF/HETICH) or equivalent to approved make. |
| 54 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed . |
| 55 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters,aluminium section weighing not less than 0.55 kg/m including necessary joining cleats,cglazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,canodised aluminum snap beading screws etc, complete all as specified and directed . |
| 56 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for sliding window shutters with frame including providing and fixing roller, three track system, locking arrangement fittings wherever required including the cost of 4.80mm thick sheet glass(selected quality), EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws where necessary all complete as per architectural drawings and the directions. |
| 57 | S&F anodised Aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 58 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors, complete all as specified and directed . |
| 59 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed . |
| 60 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed . |
| 61 | S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed . |
| 62 | S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed . |
| 63 | S&F butt hinges 100mm size, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed . |
| 64 | S&F stainless steel steel butt hinges cold rolled of size 100mm medium weight, complete all as specified and directed . |
| 65 | S&F Aluminium handles, cast type anodised of size 100mm etc, complete all as specified and directed . |
| 66 | S&F Aluminium handles, cast type anodised of size 150mm etc, complete all as specified and directed . |
| 67 | S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed . |
| 68 | S&F Aluminium anodised,barrel tower bolts 200mm long of extruded section and fixed, complete all as specified and directed . |
| 69 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm, complete all as specified and directed . |
| 70 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed . |
| 71 | S&F,aluminium (aluminium body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed. |
| 72 | M&L in repair for 4 mm thick plain glass fixing and glazing with oil putty/nails wire including haking out old broken glass in wooden/steel frame complete all as specified and directed |
| 73 | S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed. |
| 74 | S&Fin repair epoxy powder coated pelmet rods of mild steel with and including pair of brackets & finials, complete all as specified and directed . |
| 75 | M&L in repair for stainless steel pipe 25 mm dia curtain rod fixed with finials including pair of decorative complete pair of side brackets (both side), shade as approved by GE all as specified. |
| 76 | Petty repair to Steel rolling shutters system of any size and any description including reparing of ball bearing, top cover, anchoring rod, hasp and staple,gear operated system,crank handle, chain wheel and hand chain including necessary welding, grreesing etc, supplying of material is required and making the shutters, complete all as specified and directed . |
| 77 | Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed . |
| 78 | S&F steel rolling shutters, 1.25mm thick laths with gear operated type with bevel gear box and crank handle, ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified and directed . |
| 79 | S&F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe 410 (Gde E-250) quality A , complete all as specified and directed . |
| 80 | S&F Fe 410 (Gde E-250) quality A rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed . |
| 81 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges, transculent sheets etc, complete all as specified and directed . |
| 82 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed . |
| 83 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed . |
| 84 | Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc, complete all as specified and directed . |
| 85 | M&L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed . |
| 86 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed . |
| 87 | M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed. |
| 88 | M&L for coloured cement concrete chequered tiles 300x300x22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 20mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed. |
| 89 | M&L PCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified. |
| 90 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed . |
| 91 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed . |
| 92 | All as per item No 91 above but except bricks etc, complete all as specified and directed . |
| 93 | M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on Sqm plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed |
| 94 | Demolition of reinforced cement concrete(reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for. Complete all as specified and directed. |
| 95 | M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 96 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed. |
| 97 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to. Complete all as specified and directed. |
| 98 | Taking down cement or cement lime plaster, any description on brick or stone walls of any height (upto 3 storied building), etc including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed . |
| 99 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls, finished even and smooth without using extra cement, complete all as specified and directed . |
| 100 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls of any height (upto 3 storied building), finished fair and even, complete all as specified and directed . |
| 101 | M&L for 5mm thick Rendering in CM 1:3 on brick work or concrete surfaces on ceiling finished even and smooth without using extra cement etc, complete all as specified and directed . |
| 102 | M&L for dugging out average 15mm thick on disturbed chajja, beam, slab portion and applying chicken wire mesh over disturbed portion fixed with drilling bolting etc.after anti corrosion treatment of steel bar and finaly finished with 15mm thick (1:3) (in two layers) cement plaster of any height (upto 3 storied building), complete all as specified and directed . |
| 103 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of primer of any height of building (upto 3 storied building), complete all as specified and directed . |
| 104 | M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed . |
| 105 | M&L for preparation of newly plastered surfaces and applying three coats of White Wash on ceiling etc, complete all as specified and directed . |
| 106 | Material and labour for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil emulsion distemper complete all as specified and directed |
| 107 | Material and labour for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying two coat of oil emulsion distemper complete all as specified and directed |
| 108 | M&L complete removal of existing treatment on wall and applying two coat of oil emulsion distemper on one coat of putty filling 1mm thick on walls (surface finished even and smooth ), complete all as specified and directed. |
| 109 | M&L for complete removal of existing treatment and applying two coats of cement base paint (upto 4 storey building), complete all as specified and directed . |
| 110 | M&L preparation of old decorated surface of wall and applying one coat of cement base paint (upto 4 storey bldg) complete all as specified and as directed . |
| 111 | M&L for preparation of old decorated surface of wall applying one coat of white wash, complete all as specified and as directed . |
| 112 | M&L preparation of old decorated surface of ceiling applying one coat of white wash, complete all as specified and as directed . |
| 113 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed . |
| 114 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed . |
| 115 | M&L for preparation of new wood surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed . |
| 116 | M&L for preparation of old painted wood based surface of any description over 10cm width of girth and applying one coat of synthetic enamel paint, complete all as specified and directed . |
| 117 | S&F in repair, stainless steel kitchen rack of size 31”x36”x10” and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 118 | S&F in repair, Stainless Steel Sink with Drainage Board 1.0mm thick Overall size 915x460mm and Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 119 | S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed.. |
| 120 | Dismantling PVC water tank of capacity 500 Ltr and S&F new rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed . |
| 121 | Dismantling PVC water tank of capacity 1000 Ltr and S&F new rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed . |
| 122 | Dismantling PVC water tank of capacity 2000 Ltr and S&F new rotational moulded polyethylene water storage tank of capacity2000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed . |
| 123 | Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store. |
| 124 | S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls/floors, complete all as specified and directed . |
| 125 | S&F 110 mm bore PVC(SWR) bend any radius provided with access door, complete all as specified and directed . |
| 126 | S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints,fixed to wall, laid in trenches or in floors, complete all as specified and directed . |
| 127 | S&F 75mm bore PVC (SWR) bends any radius provided with access door, complete all as specified and directed . |
| 128 | S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed . |
| 129 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed . |
| 130 | S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal , complete all as specified and directed . |
| 131 | S&F in repairs stack clamps for bore dia of pipe 100mm, made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed . |
| 132 | S&F in replacement 32mm dia PVC waste pipe for WHB, complete all as specified and directed . |
| 133 | M&L for PVC (SWR) floor trap of outlet diameter 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed . |
| 134 | S&F in repairs stack clamps for bore dia of pipe 75mm, made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed . |
| 135 | Taking up or down Steel Tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc, complete all as specified and directed . |
| 136 | All as per item No. 135 above but of 20mm bore, complete all as specified and directed . |
| 137 | S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc, complete all as specified and directed . |
| 138 | All as per item No. 137 above but of size of 20mm bore, complete all as specified and directed . |
| 139 | M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, complete all as specified and directed . |
| 140 | S&F in repair fancy type, brass chromium Plated stop valves/Angle valves with long shank and cup (concealed type), cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed . |
| 141 | M&L for chromium plated long body bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as in repairs including taking down old tap of any description, complete all as specified and directed . |
| 142 | S&F in repair fancy Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of makes Cera,Jaquar Cat No FLR-5281N or Kohler or equivalent to approved make suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 143 | S&F in repair fancy type, brass chromium Plated stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed . |
| 144 | S&F in repairs 15mm dia bore Angle valves two way cast copper alloy chromium plated fancy type with long shank & cup, complete all as specified and directed. |
| 145 | Supply and fix in repair; 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed. |
| 146 | S&F in repair fancy CP center hole basin mixer (Swan Neck) of Make Cera, Jaquar Cat No FLR-5167NB or Kohler equivalent to approved make suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 147 | S&F in repair Low Level Flushing cistern PVC valveless syphonic action type, 10 ltrs capacity including supply pipe & fixing brackets of M.S. angle of size (25mmx25mmx3mm), 30 cm long in PCC (1:2:4) type B-1, block of size (10cmx10cmx10cm) on walls etc, complete all as specified and directed . |
| 148 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices with recessed bottom, jet spray, etc, complete all as specified and directed . |
| 149 | S&F coloured vitreous china wash down one piece water closet with seat cover , hinges, Accessories set, size 380x655x765mm floor mounted of make cera,Jaquar CAT No-LYS-WHT-38751P180UFSMZ equivalent to approved make fitting with twin flush fitting with inlet ball valve float and handle, incl fixing bolt, with bottom and cover and mild steel chromimum plated hinging device with complete fixed in repairs all as specified and directed. |
| 150 | S&Fin repair vitreous china wash down water closet, \\"Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including 1100mm PVC (SWR) 'P’ trap and provision of cement concrete bedding, complete all as specified and directed . |
| 151 | S&F in repair Vitreous China Wash Basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed including 15 mm dia Pillar taps, cast copper alloy with capstan heads swan neck Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type and fixed etc, complete all as specified and directed . |
| 152 | Supply and fix in repair; Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed by Engineer - in – Charge. |
| 153 | S&F in repairs vitreous china Urinal, Half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement. Complete all as specified and directed . |
| 154 | S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Complete all as specified and directed . |
| 155 | S&F in repairs vitreous china urinal partition white of size 310x700 mm. Complete all as specified and directed . |
| 156 | Supply only plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 157 | S&F in repairs brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed. |
| 158 | S&F PVC connection 15mm size with PTMT nuts of length 450mm etc, complete all as specified and directed . |
| 159 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified. |
| 160 | S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 161 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 162 | Supply and fix in repairs shower rose of brass chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia, complete all as specified and directed . |
| 163 | S&Fin repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed . |
| 164 | S&F in repair fancy towel ring fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed. |
| 165 | S&F in repairs stainless steel soap dish any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed . |
| 166 | S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specified |
| 167 | S&F in repair, Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed. |
| 168 | S&F in repair, Sheet Glass Corner Shelves Assembly (Transparent), consisting of 5.5mm thick Sheet Glass Shelf with Chromium plated Bracket Guard and Railing, complete all as specified and as directed. |
| 169 | S&F in repairs Chromium plated grating 100/125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap, complete all as specified and as directed. |
| 170 | S&F 600mmx450mm Bevelled Edge Mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washters etc, complete all as specified and directed. |
| 171 | S&F in repair looking mirror of size not execeeding 1.5 sqm of 5mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass and cup washer, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender