Tender For Construction Of Health Sub Center And Wellness Center In Village Cheriya.
Tender Value
36.15 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
5 days left
EMD
72317
Bank guarantee accepted
Document Fee
4130
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gorakhpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Health Sub Center And Wellness Center In Village Cheriya.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, tress & sapling of girth upto 30 cm measured at a height of 1m above ground level & removal of rubbish upto a distance of 50m outside the periphery of the area cleared |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator)/manual means in foundation trenches or drains , including dressing of sides & ramming of bottoms,lift upto 1.5m, including gettung out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. ALL kinds of soil |
| 3 | Excavating, supplying & filling of local earth by mechanical transport upto a lead of 5km also including ramming & watering of the earth in layers not exceeding 20 cmm in trenches, plinth, sides of foundation etc. complete |
| 4 | Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level:1:4:8 derived from natural sources:8 graded stone aggregate 40 mm nominal size |
| 5 | Cement concrete flooring 1:2:4 finished with a floating coat of neat cement . 40mm thick with 20 mm nominal size stone aggregate |
| 6 | Supplying and filling in plinth with sand floors,including watering,ramming,consolidating & dressing complete |
| 7 | Treatment of soil under existing floors using chemical emulsion 1 litre/hole, 300mm apart including drilling 12mm dia holes & plugging with cement mortar 1:2 to match existing floor: With chloropyriphos/lindane EC 20% WITH 1%CONC. |
| 8 | Providing & laying in position specified grade of reinforced cement concrete , excluding the cost of centering, shuttering, finishing and reinforcemrnt- All work up to plinth level:1:1.5:3: 3 graded stone aggregate 20 mm nominal size |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies,shelves, chajjas, lintels, bands, plain windowskills staircases & spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing, & reinforcement with 1:1.5:3: 3 graded stone aggregate 20 mm nominal size |
| 10 | Reinforced cement concrete work in walls , including attached pilasters, buttresses, plinth & string courses, fillets, columns, pillars, piers,abutments, posts & struts etc above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing, & reinforcement with 1:1.5:3: 3 graded stone aggregate 20 mm nominal size |
| 11 | Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation & plinth in cement mortar 1:6 |
| 12 | Providing & applying a coat of residual petroleum bitumen of grade of vg-10 of approved quality using 1.7kg/sqm on damp proof course after cleaning the surface with brushes & finally with piece of cloth lightly soaked in kerosene oil |
| 13 | Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation & plinth in cement mortar 1:6 |
| 14 | Half brick masonary with common burnt clay bricks of class-150 in superstructure above plinth level upto floor v level cement mortar 1:4 |
| 15 | Centering & shuttering including strutting, propping etc & remoal of form for foundations, footings, bases of columns etc for mass concrete |
| 16 | Centering & shuttering including strutting, propping etc & remoal of form for lintels, beams, plinth beams, girders, bressumers & cantilevers |
| 17 | Centering & shuttering including strutting, propping etc & remoal of form for suspended floors, roofs, landings, balconies & access platform |
| 18 | Centering & shuttering including strutting, propping etc & remoal of form for columns, pillars, piers, abutments, posts struts |
| 19 | Steel reinforcement for RCC Work. Thermo mechanically treated bars of grade Fe 500 D or more |
| 20 | 15mm cement plaster on rough side of single or half brick wall of mix 1:6 |
| 21 | 12mm cement plaster of mix 1:6 |
| 22 | Providing & applying white cement based putty of average thickness 1 mm, of approved brand & manufacturer, over plastered wall surface to prepare the surface even & smooth complete |
| 23 | Providing & laying ceramic glazed floor tiles of size 300*300mm of 1st quality conforming to IS:15622 Of approved make in colours such as white, ivory, grey fume red brown laid on 20 mm thick cement mortar 1:4,jointing with grey cement slurry 3.3kg/sqm including pointing the joints with white cement & matching pigment etc. complete |
| 24 | Providing & fixing 1st quality ceramic glazed floor tiles conforming to IS:15622 Of approved make in colours,shades except burgundy, bottle green, black of any size as approved by engineerin charge in skirting risers of steps & dados over 12 mm thick bed of cement mortar 1:3 jointing with grey cement slurry 3.3kg/sqm including pointing the joints with white cement & matching pigment etc. complete |
| 25 | Providing & laying vitrified tiles in floor in different sizes with water absorption less than 0.08% & conforming to is:15622, of approved brand & manufacturer, in all colours & shade laid on 20 mm thick cement mortar 1:4 jointing with grey cement slurry 3.3kg/sqm including grouting joints with white cement & matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only. laying of tiles will be done with the notch trowel, plier, wedge .Double charged vitrified tiles polished finish of size 600*600 mmm |
| 26 | Kota stone slab flooring over 20 mm thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete with base of cement mortar 1:4 |
| 27 | Providing & fixing 18 mm thick gang saw cut mirror polished premoulded & prepolished machine cut for kitchen platforms vanity counters window sills facias & similar location of required size approved shade colour & texture laid over 20 mm thick base cement mortar 1:4 joints reated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding & polishing to edges to give high gloss finish etc complete at all levels |
| 28 | Supply & fixing of polyster powder coated aluminium windows having 2mm thick aluminium section including coating & an average coating of 50 micron fully glazed made of aluninum door tube size 83.5*44.65 mm as vertucal member & 1114*44.45 mm size tube in bottom & horizontal members door chaukhat should be of aluminium tubular vertical with two openable shutters. the rate will include cost of material fixtures 5 mm glass handles locks screw necessary beeding & excluding cost of floor spiring if required for proper completion of work as per direction of engineer incharge |
| 29 | Providing & fixing anodosed aluminium grill of approved design/pattern with approved standard section & fixed to the existing window frame with cp brass/stainless steel screws 200 mm centre to centre (only weight of grill to be measured for payment) |
| 30 | Providing & fixing aluminium sliding door bolts ISI marked anodised transparent or dyed to required colour or shade with nuts & screws etc. complete 250mm *16mm |
| 31 | Providing & fixing aluminium tower bolts ISI marked anodised transparent or dyed to required colour or shade with nuts & screws etc. complete 250mm *10mm |
| 32 | Providing & fixing aluminium round shape handle of outer dia 100 mm with ss screws etc complete as per direction of engineer in chargem*10mm |
| 33 | Providing & fixing aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories & srrews etc complete |
| 34 | Providing & fixing aluminium hanging floor door stopper ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc complete |
| 35 | Providing & fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door with necessary screws etc cpmlete as per direction of engineer in charge |
| 36 | Distempering with oil bound washable distemper of approved brand and manufacturer to give an even shade new work over & including water thinnable priming coat with cement primer |
| 37 | Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade new workwater proofing cement paint of required shade |
| 38 | Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs balconies terraces etc consisting of following operations. With average thickness of 120 mm & mini. Thickness at khurra as 65 mm |
| 39 | Providing & fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 TYPE A INCLUDING JOINTING WITH SEAL RING CONFORMING TO is5382 leaving 10 mm gap for thermal expansion single socket pipes 110mm dia |
| 40 | Providing & fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50*50*50 mm hard wood plugs screwed with ms screws of required length including cutting brick work & fixing in cement mortar 1:4 |
| 41 | Providing & fixing on wall face unplasticised rigid PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes conforming to IS 13592 TYPE A INCLUDING JOINTING WITH SEAL RING CONFORMING TO is5382 leaving 10 mm gap for thermal expansion coupler 110mm |
| 42 | Providing & fixing on wall face unplasticised rigid PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes conforming to IS 13592 TYPE A INCLUDING JOINTING WITH SEAL RING CONFORMING TO is5382 leaving 10 mm gap for thermal expansion bend 87.5 degree 110mm bend |
| 43 | Providing & fixing on wall face unplasticised rigid PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes conforming to IS 13592 TYPE A INCLUDING JOINTING WITH SEAL RING CONFORMING TO is5382 leaving 10 mm gap for thermal expansion shoe (plain) 110 mm shoe |
| 44 | Providing & fixing to inlet mouth of rain water pipe cast iron grating 15cm dia & weighing not less than 440gm |
| 45 | Providing & fixing stainless steel grade 304 railing made of hollow tubes channels plates etc including welding grinding buffing polishing & making curvature & fitting the same with necessary stainless steel nuts & bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangements as per approval of engineer in charge |
| 46 | Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match shade of tiles including rubbing & cleaning etc complete on 20 mm thick bed of cement mortar 1:4. ordinary cement without any pigment |
| 47 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch modular plate suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as required Group C |
| 48 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulaed copper conductor single core cable in surface/recessed medium class PVC conduit as required 2*1.5 sqmm + 1*1.5 sqmm earth wire |
| 49 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulaed copper conductor single core cable in surface/recessed medium class PVC conduit as required 2*2.5 sqmm + 1*2.5 sqmm earth wire |
| 50 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulaed copper conductor single core cable in surface/recessed medium class PVC conduit as required 2*4 sqmm + 1*4 sqmm earth wire |
| 51 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulaed copper conductor single core cable in surface/recessed medium class PVC conduit as required 2*6 sqmm + 1*6 sqmm earth wire |
| 52 | S/F of following sizes of medium class PVC condiut along with accesssories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 20 mm |
| 53 | Wiring for light/power plug with 2*4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 no. 4sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 54 | S/F of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required 5/6 A switch |
| 55 | S/F of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required 3 pin 5/6 A socket outlet switch |
| 56 | S/F two module stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc as required |
| 57 | S/F modular blanking plate on the existing modular plate & switch box excluding modular plate etc as required |
| 58 | S/F of following sizes/modules GI box along with modular base & cover plate for modular switches in recess etc as required 1 or 2 module (75mm * 75 mm) |
| 59 | S/F suitable size GI box with modular plate & cover in front on surface or in recess including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch connections etc |
| 60 | S/F suitable size GI box with modular plate & cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch connections etc |
| 61 | S/F 3 Pin 5A ceiling rose on the existing junction box/wooden block including connection etc as required |
| 62 | S/F brass batten/angle holder including connection etc as required |
| 63 | Installation testing & commissioning of wall bracket/ceiling fittings of all sizes and sahapes containg upto two GLSCFL/LED lamps per fitting complete with all accessories including connection etc as required |
| 64 | Installation testing & commissioning of ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 sq.mm FRLSH PVC INSULATED COPPER conductor single copre cable etc including providing and fixing phenolic laminated sheet cover on the fan box etc as required |
| 65 | Installation of exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required upto 450 mm sweep |
| 66 | Extra for fixing the louvers/shutters complete with frame for exhaust fans of all sizes |
| 67 | S/F suitable size GI box with modular plate & cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C CURVE Including connections painting etc as required |
| 68 | s/f OF HEXAgonal fan boxWITH HEXAGONAL SIDE OF approx 80mm in length fabricated from 16SWGM.S sheet incorporating 10 mm dia M.S round barduly bent for supporting fan for proper comp. of work |
| 69 | Supply, installation testing and commissioning of 1200 mmsweep, BEE 5 Star rated ceiling fan with brush less direct current BLDC MOTOR CLASS of insulation B, 3nos blades, 30 cm long down rod 2nos canopies shackle kit safety rope copper winding power factor not less than 0.9 service valve minimum 6 air delivery minimum 210 cum/min 350 RPM THD less than 10% remote or electronic regulator unit forc speed control and all remaining accessories including safety pin nut bolts washers temp. rise 75 degree c, insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz single phase ac supply earthiing etc complete as required |
| 70 | Supply & fixing following way single pole and neutral sheet steel MCB distribution board 240 v on surface/recess complete with tinned copper bus bar neutral bus bar earth bar din bar interconnection powder painted including earthing etc as required 12 way, DOYBLE DOOR |
| 71 | Supplying and fixing 5A to 32 A rating 240/415 v, 10 ka, c curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing SINGLE POLE |
| 72 | Supplying and fixing 5A to 32 A rating 240/415 v, 10 ka, c curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing DOUBLE POLE |
| 73 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc as required |
| 74 | Earthing with GI earth plate 600mm * 600 mm * 6 mm thick including accesssories and providing masonry enclosure with cover plate having locking arrangement & watering pipe of 2.7 m long |
| 75 | Suppling and laying 25mm * 5mm GI STRIP AT 0.5 M below ground as strip earth electrode including connection/terminating with GI nut bolt spring washer etc as required |
| 76 | Providing and laying of 6SWG GI WIRE at 0.5 m below ground level for conductor earth electrode including connection/terminating with GI thimble etc as required |
| 77 | Laying of one no. PVC insulated & PVC Sheated/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation sand cushioning protective covering and refilling the trench etc as required Upto 35 sq.mm |
| 78 | Supply & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheated/XLPE aluminium conductor cable of 1.1 KV GRADE as required 2*10 sq.mm (19mm) |
| 79 | Providing laying and fixing following dia GI pipe in ground complete with GI fitting including trenching and re filling etc as required |
| 80 | Supply and following size of 1.1 KV Grade multicore aluminium conductor PVC sheated armoured cable as per IS 1554 10 SQM 2 CORE |
| 81 | Supply & erection of 1* 10 w mirror light completec in all respect |
| 82 | Supply & fixing of 7/9 watt LED bulb complete in all respect |
| 83 | Supply & fixing of LED tube light with batten suitable for up to 1*40 watt LED Tube light complete including tube etc on surface complete in all respect |
| 84 | Supply & fixing of recess mounting round 15 to 18 watt LED concealed light having powder coated die cast aluminium housing with heat sink , diffuser/reflector and driver set complete in all respect CAT.-AAA |
| 85 | Supply & fixing of 230/250 VOLTS, 50 HZ 55W 1400 RPM exhaust fan including providing nuts, bolts, mounting frame and other accessories including connection etc. complete as required Make: Havells-Standard-Refresh air-SPS (300 MM SWEEP) |
| 86 | Providing and fixing white vitreous china pedestal type water closet (european type wc pan) with seat and lid 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device ( handle lever) conforming to is:7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required WC pan with ISI marked white plastic seat and lid |
| 87 | P/F WASH BASIN with CI Brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls whereever require WHITE Vitreous china flat back wash basin size 550*400 mm with single 15 mm cp brass pillar tap |
| 88 | P/F Stainless steel AISI 304 (18/8) KITCHEN sink as per IS:13983 with CI brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls whereever required: kitchen sink with board 510*1040 mm bowl depth 200 mm |
| 89 | P/F PVC WASTE PIPE FOR SINK OR Wash basin including PVC waste fittings complete semi rigid pipe 32 mm dia |
| 90 | P/F PVC WASTE PIPE FOR SINK OR Wash basin including PVC waste fittings complete semi rigid pipe 40 mm dia |
| 91 | Providing and fixing 600*450 mm beveled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleats with cp brass screws and washers complete |
| 92 | P/F 8mm dia CP/SS jet with flexible tube upto 1 m long with ss triangular plate to eurpean type wc of quality & make as approved by engineer in charge 15 mm nominal bore |
| 93 | P/F PTMT LIQUID SOAP CONTAINER 109 MM WIDE, 125 MM high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms |
| 94 | Making khurras 45*45 cm with average mini thickness of 5 cm cement concrete 1:2:4 over PVC Sheet 1m*1m*400micron, finished with 12 mm cement plaster 1:3 & a coat of neat cement rounding the edges & making &finishing the outlet complete |
| 95 | P/F PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with mini dist of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gm |
| 96 | P/F toilet paper holder cp brass |
| 97 | P/F GI pipes complete with GI fitting and clamps i/c cutting & making good the walls etc internal work exposed on wall 25 mm dia nominal boret |
| 98 | Painting GI pipes and fitting with two coats of anti corrosive bitumastic paint of approved quality 25 mm dia nominal bore |
| 99 | P/F CPVC Pipes internal work exposed on wall 20 mm dia nominal outer dia pipes |
| 100 | P/F CPVC Pipes internal work exposed on wall 25 mm dia nominal outer dia pipes |
| 101 | P/F CPVC Pipes having thermal stability for hot& cold water supply 15 mm dia nominal outer dia pipes |
| 102 | P/F CPVC Pipes having thermal stability for hot& cold water supply 20 mm dia nominal outer dia pipes |
| 103 | P/F CPVC Pipes having thermal stability for hot& cold water supply 25 mm dia nominal outer dia pipes |
| 104 | P/F unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore |
| 105 | P/F CP brass bib cock of approved quality cconforming to IS 8931 15 mm nominal bore |
| 106 | P/F CP brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 15mm nominal borebib cock of approved quality cconforming to IS 8931 15 mm nominal bore |
| 107 | P/F gun metal gate valve with CI wheel of approved quality (screwed end) 25mm dia nominal bore |
| 108 | P/F gun metal gate valve with CI wheel of approved quality (screwed end) 20mm dia nominal bore |
| 109 | P/F ball valve (brass) of approved quality , high or low pressure, with plastic floadts complete 25mm nominal bore |
| 110 | P/P ON terrace (at all floor levels) polyethylene water storage tank IS:12701 marked with cover & suitable locking arrangements &making necessary holes for inlet, outlet &overflow pipes but without fittings &the base support for tank |
| 111 | Excavating trenches of required width for pipes cables etc. Pipes, cables, etc exceeding 80 mm dia but not exceeding 300 mm dia |
| 112 | Providing,laying, &jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 including testing of joints etc complete 100 mm dia |
| 113 | Providing,laying, &jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 including testing of joints etc complete 150 mm dia |
| 114 | Providing & laying cement concrete 1:5:10 all round SW pipes including bed concrete as per standard design 100 mm dia PVC pipes |
| 115 | Providing & laying cement concrete 1:5:10 all round SW pipes including bed concrete as per standard design 150 mm dia PVC pipes |
| 116 | Providing & fixing square mouth SW gully trap class SP-1 complete with CI grating with Sewer bricks conforming to IS:4885 |
| 117 | Inside size 90*80 cm and 45 cm deep including CI cover with frame 455-610 mm internal dimensions total weight of cover and frame to be not less than 38 kg : with sewer bricks conforming to is 4885 FOR SEWER LINE |
| 118 | providing ms foot rests INCLUDING fixing in manholes with 20*20*10 cm cement concrete blocks 1:3:6 as per standard design with 20*20 mm sq bar |
| 119 | Earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas including getting out & disposal of excavated earth lead upto 50m & lift upto 1.5m as directed by engineer in charge . ALL kinds of soil FROM 0.00 MT TO 1.50 MT |
| 120 | 1.50 MT TO 3.0 MT |
| 121 | 3.0 MT TO 4.50 MT |
| 122 | P/L IN position cement concrete of specified grade excluding the cost of centering & shuttering-All work upto plinth level :1:4:8 derived from natural sources:8 graded stone aggregate 40mm nominal size |
| 123 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies,shelves, chajjas, lintels, bands, plain windowskills staircases & spiral stair cases above plinth level upto floor five level, excluding the cost of centering shuttering finishing & reinforcement with 1:1.5:3 |
| 124 | Centering & shuttering including strutting propping etc & removal of form for suspended floors roofs landings balconies & acces platform |
| 125 | Brick work with common burnt clay FPSbricks of class designation 7.5 in foundation & plinth in cement mortar 1:6 |
| 126 | Steel reinforcement for RCC Work. Thermo mechanically treated bars of grade Fe 500 D or more |
| 127 | Cement concrete flooring 1:2:4 finished with a floating coat of neat cement . 40mm thick with 20 mm nominal size stone aggregate |
| 128 | Cement plaster 1:3 finished with a floating coat of neat cement 12mm cement plaster |
| 129 | providing ms foot rests INCLUDING fixing in manholes with 20*20*10 cm cement concrete blocks 1:3:6 as per standard design with 20*20 mm sq bar |
| 130 | Providing & fixing ci tee at inlet & outlet of septic tank |
| 131 | Providing & fixing soil waste & vent pipes:centrifugally cast iron socketed pipe as per IS 3989 |
| 132 | Providing & fixing terminal guard sand cast iron as per is 3989 |
| 133 | Providing & fixing in position pre cast RCC man hole cover & frame of required shape & approved quality MD 10- CIRCULAR SHAPE 500MM INTERNAL |
| 134 | Providing & fixing in position pre cast RCC man hole cover & frame of required shape & approved quality LD 2.5- CIRCULAR SHAPE 450MM INTERNAL |
| 135 | Making soak pit 2.5m dia,3m deep with 45*45 cm dry brick honey comb shaft with bricks & sw drain pipe 100mm dia 1.8m long complete as per standard design with common burnt clay fps bricks of class designation 7.5 |
| 136 | Earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas including getting out & disposal of excavated earth lead upto 50m . ALL kinds of soil |
| 137 | P/L IN position cement concrete of specified grade excluding the cost of centering & shuttering-All work upto plinth level :1:4:8 derived from natural sources:8 graded stone aggregate 40mm nominal size |
| 138 | Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation & plinth in cement mortar 1:4 |
| 139 | Cement plaster 1:3 finished with a floating coat of neat cement 12mm cement plaster |
| 140 | Cement concrete flooring 1:2:4 finished with a floating coat of neat cement . 40mm thick with 20 mm nominal size stone aggregate |
| 141 | Earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas including getting out & disposal of excavated earth lead upto 50m . ALL kinds of soil |
| 142 | Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level:1:4:8 derived from natural sources:8 graded stone aggregate 40 mm nominal size |
| 143 | Providing & laying in position specified grade of reinforced cement concrete excluding the coat of centering shuttering finishing & reinforcement-All work upto plinth level:1:1:5:3. 3 graded stone aggreg 20 mm nominal size derived from natural sources:8 graded stone aggregate 40 mm nominal size |
| 144 | Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation & plinth in cement mortar 1:4 |
| 145 | Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation & plinth level upto floor v level in all shapes & sizes in:cement mortar 1:4 |
| 146 | Steel reinforcement for RCC Work. Thermo mechanically treated bars of grade Fe 500 D or more |
| 147 | 12 mm cement plaster of mix 1:4 |
| 148 | Finishing walls with water proofing cement paint of required shade |
| 149 | Providing & fixing ms grills of required pattern in frames of windows etc with ms flats, square or round bars etc including priming coat with approved steel primer all complete |
| 150 | Painting with synthetic enamel paint of approved brand & manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand & manufacture |
| 151 | Earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas including getting out & disposal of excavated earth lead upto 50m & lift upto 1.5m as directed by engineer in charge . ALL kinds of soil FROM 0.00 MT TO 1.50 MT |
| 152 | Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level:1:4:8 derived from natural sources:8 graded stone aggregate 40 mm nominal size |
| 153 | Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation & plinth in cement mortar 1:4 |
| 154 | Cement plaster 1:3 finished with a floating coat of neat cement 12mm cement plaster |
| 155 | Construction of granular sub base by providing close graded material conforming to specification mixing in mechanical mix plant ay OMC carriage of mixed material by tippers to work site for all leads & lifts spreading in uniform layers of specified thickness with motor grader on prepared surface & compacting with vibratory power roller to achieve desired density complete as per speci. & dir of engineer in charge with material conforming to grade 1 having CBR Value 30 |
| 156 | Providing & laying factory made chamfered edge cement concrete paver blocks in foothpath parks lawns drive ways or light traffic parking etc of required strenght thickness & size/shape made by table vibratory method using PU mould laid in required colour & pattern over 50mm thick compacted & proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, fillings the joints with sand & cutting of paver blocks as per requird size & pattern, finishing & sweeping extra sand complete all as per direction of engineer in charge 80mm thick cement concrete paver block of m30 grade with approved colour design & pattern |
| 157 | Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS:2800 PART 1 ,including collecting samples from different strata, preparing & submitting strata chart/bore log, including hire & running charges of all equipments tools plants & machineries required for the job all complete as per direction of engineer in charge upto 90 m depth below ground level 300 mm dia |
| 158 | Supplying, assembling, lowering & fixing in vertical position in bore well,unplasticized PVC medium well casing pipe of required dia,conforming to IS 12818, 100 mm nominal size dia |
| 159 | Supplying, assembling, lowering & fixing in vertical position in bore well,unplasticized PVC medium well screen RMS pipes with ribs, conforming to IS 12818, INCLUDING hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer in charge, 100 mm nominal size dia |
| 160 | Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer for all lead & lifts all complete as per direction of engineer in charge |
| 161 | Development of tube well in accordance with IS:2800 part 1&IS 11189 Toestablish max rate of usable water yield without sand content with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by v notch metihd or any other approved method, measuring static level & draw down etc. by step draw down method collecting water samples & getting tested in approved labroatory ,i/c disinfection of tube well all complete including hire & labour charges of air compressor tools & accessories etc all as per requirement & direction of engineer in charge |
| 162 | P/F suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement all complete for bore well of 100 mm dia |
| 163 | P/F bail plug/bottom plug of reqired dia to the bottom of pipe assembly of tube well as per IS 2800 1500 mm diasuitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement all complete for bore well of 100 mm dia |
| 164 | P/F GI pipes complete with GI fittings including trenching & refilling etc 32 mm dia nominal bore |
| 165 | S/F Of Armoured cable ISI marked on wall face rigid PVC RAIN WATER PIPE 160 MM DIA |
| 166 | Pumping set KSB make submersible pump set suitable for installation in bore well of min 110 mm inner dia preferbly more and having under noted specification |
| 167 | Providing & placing in position filters of 40 mm dia GI pipe with brass strainer of approved quality |
| 168 | Providing & fixing to filter & lowering to proper levels 40mm GI pipe for tube well including cleaning & priming the tube well |
| 169 | Providing and placing in position hand pump of approved quality for 40 mm dia GI pipe complete with all accessories |
| 170 | Providing & fixing of inauguration stonr |
| 171 | Less 5% Due to competitive price efficiency |
| 172 | Add 1% For Labour Cess ON (A) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender