Tender For Addition/Alteration To Footpath At Certain Locations Of Arde Area Under Ge(I) R&D Pashan, Pune
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration To Footpath At Certain Locations Of Arde Area Under Ge(I) R&D Pashan, Pune
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Sep-2026 | Date Corrigendum | Date | 14-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge |
| 2 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 500 metres lead complete all as specified and directed. |
| 3 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, all kinds of soil as directed by Engineer-in- Charge |
| 4 | Providing Laying ,spreading and compaction stone aggregate of specified size in uniform thickness hand picking, rolling with 3wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camper etc applying brooming requsite type of screening/binding material to fill upintersticks of course aggregate, watering and compacting to the required dencity complete all as specified and directed.of stone aggregate (Single size) : 40 to 63 mm nominal size complete as per direction of Engineer-in- charge. |
| 5 | Providing and laying in position cement concrete of 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) specified grade work inSub base of footpath and hardtanding etc complete all as specified and directed. |
| 6 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of manufactured sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 7 | Providing and laying 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of manufactured sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 8 | Providing and laying 80 mm thick C.C. paver block of M-35 grade with approved color design and pattern.factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of manufactured sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 9 | Providing and fixing Chequerred precast cement concrete tiles Light/dark shade pigment using white cement 22 mm thick on 20 mm thick screed bed of cement mortar 1:4 (1 cement: 4manufactured sand) in Approach path, footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete all as specified and directed. |
| 10 | Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge |
| 11 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 12 | Material and labour for Steel work welded In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. complete all as specified and directed. |
| 13 | Material and labour for providing and applying Painting with one coat of synthetic enamel paint on old steel surface of approved brand and manufacture of required colour to give an even shade complete all as specified and directed. |
| 14 | Material and labour for providing and fixing Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size (Recycled Aggregate RA), including necessary excavation of size 250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing complete all as specified and directed. |
| 15 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster upto fourth floor including disposal of rubbish to the dumping ground within 500 metres lead completeall as specified and directed. |
| 16 | Material and labour for 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) complete all as specified and directed. |
| 17 | Demolishing stone rubble masonryIn cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 18 | Material and labour for Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 manufactured sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 manufactured sand) complete all as specified and directed. |
| 19 | Material and labour for extra over granite or trap stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of face beds and joints as specified of random rubble walling uncoursed or brought upto course with 40mm maximum depression on face from straight edge held against the dressed surface complete all as specified and directed. |
| 20 | Material and labour for Flush/ Ruled pointing on stone work with cement mortar 1:3 (1 cement : 3 manufactured sand) :complete all as specified and directed. |
| 21 | Provide and applying Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of pproved brand and manufacture, including applying two coats wherever required to achieve even shade and colour complete all as specified and directed. |
| 22 | Material and Labour for roof paint/ Floor Paint two coats per manufacturer instructions on concrete/ brick or stone surfaces after making the surface clean from dust/dirt by brooming/washing etc complete all as specified and dirceted. |
| 23 | Material and labour for Painting with two coats of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old /new kerb stone work complete all as specified and directed. |
| 24 | Material and labour for Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender