Tender For Repair / Maintenance Of Ro Plants At Various Location & Electric Water Heaters Under Age (I) Coast Guard Noida.
Tender Value
5.10 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
18 days left
EMD
10200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Ro Plants At Various Location & Electric Water Heaters Under Age (I) Coast Guard Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Servicing of existing domestic RO plant of capacity 15 LPH of Make- KENT Model-grand+/ Livepure model-Stellar and including attending Complaint for RO plants within 24 hours of intimation at CG location of Sector 52 Noida and carry out all repairs such as electric connection , tightening of components ,water connection ,stoppage of water leak and other minor repairs as reqd to make RO fully functional including replacement of washer, small lengths of electric wire,interconnecting water pipes with fittings , nut bolts , insulation tape, gasket etc complete all as specified and directed.Note :-(i) The scope of work includes checking the performance of RO System and submitting a report after every visit. His scope of work include: Unit checkup and general cleaning, chemical cleaning of cartridge, if required and checking TDS after every service/complaint.ii) In case of any complaint/ breakdown/fault in any equipment, the firm has to attend the same within 24 hours of reporting on phone/FAX/ Email etc. failing which will invite a penalty for per complaint as follows:-a. Attending to complaint between 48 hours — 4 days of intimation- Rs. 200/-b. Attending to complaint between 5 days to 7 days of intimation- Rs. 500/-c. Attending to complaint beyond 7 days - Rs. 1000/-iii) During attending complaint it shall be ascertained by deptt and contractor whether replacement of part/servicing of plant is reqd. In case during servicing of plant,relacement of any item found necessary then these shall be measured and paid in addition as indicated subsequent items of BOQiv) Contractor has to submit the Complaint slips duly signed by User |
| 2 | M & L in replacement Pre filter Housing complete suitable for 15 LPH RO plant |
| 3 | M & L in replacement for Pre filter element for 10\\" filter suitable for 15 LPH RO plant Make-Kent/Livepure or equivalent. |
| 4 | M & L in replacement for In-line sediment filter suitable for 15 LPH RO plant Make- Kent/livepure or Equivalent. |
| 5 | M & L in replacement for In-line active carbon filter suitable for 15 LPH RO plant . Make- Kent/livepure or Equivalent. |
| 6 | M & L in replacement for Membrane with housing sealed type suitable for 15 LPH RO plant Make- Kent/livepure or Equivalent. |
| 7 | M & L in replacement for UF Membrane 4\\" complete set suitable for 15 LPH RO plant |
| 8 | M & L in replacement for Diaphragm pump AQ&Q E-100 GPD Make-Kent or equivalent. |
| 9 | M & L in replacement for TDS adjuster for Kent RO suitable for 15 LPH RO plant |
| 10 | M & L in replacement for FRT (Flow Reducer Tubes) suitable for 15 LPH plant . Make- Kent or equivalent. |
| 11 | M & L in replacement for DC Adopter for motor suitable for 15 LPH RO plant. Make- Kent/Livepure or equivalent. |
| 12 | M & L in replacement for PVC outlet water Tap suitable for 15 LPH RO plant Make-Kent/Livepure or equivalent. |
| 13 | M & L in replacement for Solonied Valve for 15 LPH Kent RO Make- Philips / Bajaj/ havells or equivalent |
| 14 | M & L in replacement for Float valve accessory complete except switch suitable for 15 LPH RO plant Make- Kent/Livepure or equivalent. |
| 15 | M & L in replacement for Hydrosrtatic tank 15 ltrs capacity Make-Kent/Livepure or equivalent. |
| 16 | M & L in replacement for Low pressure switch suitable for 15 LPH RO plant Make- Kent/Livepure or equivalent. |
| 17 | M & L in replacement for UV Choke suitable for 15 LPH RO plant ,Make Phillips or equivalent |
| 18 | M & L in replacement Float Switch suitable for 15 LPH RO plant all as directed |
| 19 | M & L in replacement for Motor head for Diaphram Pump suitable for 15 LPH RO plant all as directed |
| 20 | M & L in replacement for Misc fittings Elbow and connectors such as Sediment Filter, Diaphram pump, Membrane & Pre-filter Elbows different type, one side and 2 side push complete all as directed |
| 21 | Servicing of skid mounted type RO (Reverse osmosis) plants of capacity 50 LPH Make- EUKAWA installed at Sector-62 including necessary dismantling repairing,cleaning with clean water and back washing with water pressure and refixing of RO plant completely and reassembling and fixing in position. Note :-(i) The scope of work includes checking the performance of RO System and submitting a report after every visit. His scope of work include: unit checkup and general cleaning, chemical cleaning of cartridge, if required and checking TDS after very service/complaintii) In case of any complaint/ breakdown/fault in any equipment, the firm has to attend the same within 24 hours of reporting on phone/FAX/ Email etc. failing which will invite a penalty for per complaint as follows:-a. Attending to complaint between 48 hours — 4 days of intimation- Rs. 200/-b. Attending to complaint between 5 days to 7 days of intimation- Rs. 500/-c. Attending to complaint beyond 7 days - Rs. 1000/-iii) During attending complaint it shall be ascertained by deptt and contractor whether replacement of part/servicing of plant is reqd. In case during servicing of plant,relacement of any item found necessary then these shall be measured and paid in addition as indicated subsequent items of BOQiv) Contractor has to submit the Complaint slips duly signed by User |
| 22 | M & L in replacement for Pre filter Housing suitable for 50 Ltrs EUKAWA RO complete all as directed. |
| 23 | M & L in replacement for Pre filter element suitable for 50 Ltrs EUKAWA RO complete all as directed. |
| 24 | M & L in replacement for In-line sediment filter Candel suitable for 50 Ltrs EUKAWA RO complete all as directed. Make- EUKAWA /Filmtec/CSM/Hydranautics. |
| 25 | M & L in replacement Membrane Candel suitable for 50 Ltrs EUKAWA RO complete all as directed. Make:-EUKAWA , Filmtech /CSM /Hydranautics. |
| 26 | M & L in replacement Diaphrame pump 48 Volt suitable for 50 Ltrs EUKAWA RO complete all as directed. Make-EUKAWA or equivalent. |
| 27 | M & L in replacement FRT suitable for 50 Ltrs EUKAWA RO complete all as directed . Make- EUKAWA or equivalent. |
| 28 | M & L in replacement DC Adopter 48 Volt for motor suitable for 50 Ltrs EUKAWA RO complete all as directed . Make- EUKAWA or equivalent. |
| 29 | M & L in replacement for float valve accessary complete except switch suitable for 50 LPH Ro plant |
| 30 | Servicing of skid mounted industrial type RO (Reverse osmosis) plants of capacity 1000 LPH Make- 3S Enterprise installed at Sector-23 and Sector-24 including necessary dismantling repairing,cleaning with clean water and back washing with water pressure and refixing of RO plant completely and reassembling and fixing in position. Note :-(i) The scope of work includes checking the performance of RO System and submitting a report after every visit. His scope of work include: unit checkup and general cleaning, chemical cleaning of cartridge, if required and checking TDS after very service/complaintii) In case of any complaint/ breakdown/fault in any equipment, the firm has to attend the same within 24 hours of reporting on phone/FAX/ Email etc. failing which will invite a penalty for per complaint as follows:-a. Attending to complaint between 48 hours — 4 days of intimation- Rs. 200/-b. Attending to complaint between 5 days to 7 days of intimation- Rs. 500/-c. Attending to complaint beyond 7 days - Rs. 1000/-iii) During attending complaint it shall be ascertained by deptt and contractor whether replacement of part/servicing of plant is reqd. In case during servicing of plant,relacement of any item found necessary then these shall be measured and paid in addition as indicated subsequent items of BOQiv) Contractor has to submit the Complaint slips duly signed by User |
| 31 | M & L in replacement for In-line sediment filter Candel suitable for 1000 Lph capacity RO complete all as directed. Make- EUKAWA /Filmtec/CSM/Hydranautics. |
| 32 | M & L for repair of Single Phase RO Control Panel 1000 LPH capacity complete all as specified and directed. |
| 33 | M & L in replacement TDS adjuster suitable for 1000 Lph capacity RO complete all as directed |
| 34 | Servicing of skid mounted industrial type RO (Reverse osmosis) plants of capacity 250 LPH Make- 3S Enterprise installed at Sector-23 including necessary dismantling repairing,cleaning with clean water and back washing with water pressure and refixing of RO plant completely and reassembling and fixing in position. Note :-(i) The scope of work includes checking the performance of RO System and submitting a report after every visit. His scope of work include: unit checkup and general cleaning, chemical cleaning of cartridge, if required and checking TDS after very service/complaintii) In case of any complaint/ breakdown/fault in any equipment, the firm has to attend the same within 24 hours of reporting on phone/FAX/ Email etc. failing which will invite a penalty for per complaint as follows:-a. Attending to complaint between 48 hours — 4 days of intimation- Rs. 200/-b. Attending to complaint between 5 days to 7 days of intimation- Rs. 500/-c. Attending to complaint beyond 7 days - Rs. 1000/-iii) During attending complaint it shall be ascertained by deptt and contractor whether replacement of part/servicing of plant is reqd. In case during servicing of plant,relacement of any item found necessary then these shall be measured and paid in addition as indicated subsequent items of BOQiv) Contractor has to submit the Complaint slips duly signed by User |
| 35 | M & L in replacement for In-line sediment filter Candel suitable for 250 Lph capacity RO complete all as directed. Make- EUKAWA /Filmtec/CSM/Hydranautics. |
| 36 | M & L for repair of Single Phase RO Control Panel 250 LPH capacity complete all as specified and directed. |
| 37 | M & L in replacement TDS adjuster suitable for 250 Lph capacity RO complete all as directed |
| 38 | Supply only high-perfomance liquid anti-scalant specifically formulated for use in Reverse osmosis (RO) water treatment systems to controland prevent scale formation caused by dissolved salts such as calcium carbonate, calcium sulfate, barium salfate, strontium sulfate, and silica. the product is compatible with all major RO membrane brands and ensures extended membrane life, improved permeate quality, and reduced cleaning frequency complete all as specified and directed. |
| 39 | Material & Labour for carrying out maint and services to pre-filter media FRP vessel of Industrial RO of capacity 50/250/1000 LPH , by dismantling and removing the top cover, connection pipes etc, removing the unsv filter media layer wise , pressure washing and cleaning the FRP vessel using hydro-chloric acid (HCL) of required quantity and cleaning with fresh water to remove acid contents etc and refilling new filter media coarse and fine grain sand and activated carbon in layers, after cleaning and washing the inner surfaces of filter FRP vessel throughly , reconnecting the inlet and outlet valves firmly including all necessary testing and commissioning of pre-filter FRP vessel for satisfactory performance completee all as specified and as directed. Notes. Refilling of new filter media coarse grain sand and Activated carbon shall be measured and paid for separately. |
| 40 | Refilling with new filter media coarse and fine grain sand in layers of required quantity in pre-filter FRP vessel of industrial RO of capacity 50/250/1000 LPH, complete all as specified and as directed. |
| 41 | Refilling with new filter media activated carbon in layers of required quantity in pre-filter FRP vessel of industrial RO of capacity 50/250/1000 LPH, complete all as specified and as directed. |
| 42 | Taking down electric water heater/geysers of capacity 25/35/50 ltrs and of any make from its mounting place , opening it for descaling /cleaning of inner tank from deposited scales with descaling solution including checking leak ,testing,sealing of joints, carrying out the minor repair on surface of outer body, bottom and top cover and re-fixing the geyser in same position Complete all as directed. Note : (a). Any major repair/replacement of any part which shall be measured and paid seperately .(b) Any damage if occurred during the process of cleaning the geyser will be made good by contactor at no extra cost. (c) A Geyser after taking off shall be refixed on the day when it was taken off unless ordered for painting /major repair/replacement of parts. (d) No Extra cost for transport will be paid for repairs to Market. (e) Painting of geyser and major repairs shall be carried out in a place at sec 23 Noida. |
| 43 | S&F in replacement of geyser element of 1.5 KW rating double tube type with cup type or circular/triangle shape including rubber washers suitable to fit in the existing geyser without any water leakage complete all as specified and as directed by Engr-in-Charge . Make : Micron King/Bajaj/Recold/thita/havells. |
| 44 | S&F in replacement of the Gasket (heat proof rubber) for apparatus plate suitable for the different make of 25 /35/50 litres capacity geysers as per site requirement complete, all as specified and as directed by Engr-in-ChargeMake as per existing or compatible as approved ISI marked |
| 45 | S&F in replacement of heavy duty element holding assembly/ apparatus plate made out of copper and chromium plate( different 6/9 hole or as per site requirement ) with provision for safety valve in its inlet and outlet, pocket for thermostat/ thermal cut system and drain plug all as per site requirement and directed by engineer in charge suitable for 25 litres capacity geysers. Make as per existing or compatible as approved ISI marked |
| 46 | S&F in replacement of heavy duty element holding assembly ( different type hole or without hole) with provision for safety valve in its inlet, pocket for thermostat/ thermal cut system and drain plug all as per site requirement and directed by engineer in charge suitable for 50 litres capacity geysers. Make : Make as per existing or compatible as approved ISI marked |
| 47 | S&F stainless steel inner tank heavy duty in replacement of steel inner tank having pressure bearing capacity 6 Kg/Cm.sq. suitable to the existing 25 ltrs capacity geysers. Complete with Nut Bolt and washer, all as specified and as directed by Engr-in-Charge.Make Bajaj/Recold/Jaguar /USHA. Note : Only OEM manufacture SS tank will be accepted. |
| 48 | S&F stainless steel inner tank heavy duty in replacement of steel inner tank having pressure bearing capacity 6 Kg/Cm.sq. suitable to the existing 50 ltrs capacity geysers.Complete, all as specified and as directed by Engr-in-Charge.Make Bajaj/Recold/Jaguar /USHA. Note : Only OEM manufacture SS tank will be accepted. |
| 49 | S&F in replacement the thermostat 7'' long for the geysers 25 Ltrs. capacity as per site requirement complete, all as specified and as directed by Engr-in-Charge. Make Bajaj/Digits/Recold/DASS PASS/THETA/Micron King |
| 50 | S&F in replacement the thermostat 11'' long for the geysers 25/35/50 Ltrs. capacity as per site requirement complete, all as specified and as directed by Engr-in-Charge. Make Bajaj/Digits/Recold/DASS PASS/THETA/Micron King |
| 51 | S&F in replacement of Multiple use safety valve / PRV 15mm, bore for geyser inlet or all as specified and as directed by Engr-in-Charge .Make as per existing or compatible as approved ISI marked |
| 52 | S&F in replacement steel ribbed connection pipe 450 mm long heavy duty (Hot water) with two brass nut and nylon washer suitable for 15mm dia inlet and outlet pipe of geyser and connecting up complete, all as specified and as directed by Engr-in-Charge .Make : Theeta or as per existing or compatible as approved ISI marked |
| 53 | S&F in replacement steel ribbed connecting pipe 600 mm length heavy duty (Hot water) with two brass nut and nylon washer suitable for 15mm dia inlet and outlet pipe of geyser and connecting up complete, all as specified and as directed by Engr-in-Charge .Make as Approved ISI marked |
| 54 | Supply and fixing in replacement of the insulating material i. e. glass wool. complete, all as specified and as directed by Engr-in-Charge .Make as per existing or compatible as approved ISI marked |
| 55 | S&F in replacement of indicating lamp Red or Green as per Geyser suitability complete all as specified and as directed by Engr-In-Charge Make as per existing or compatible as approved ISI marked |
| 56 | Supply and fix in replacement of outer body made/fabricated of 20 SWG MS sheet for Geysers of 25 ltrs capacity duly painted with spray paint with clamps 2 Nos of size 15mmx1mm thick with necessary nut and bolts complete all as specified and as directed by Engr-in-Charge. |
| 57 | M & L in replacement Geyser Heating Element assembly 2000 watt (in Round Shape bottom Assembly) with arrangement of 6 Nut bolt, One no suitable round rubber gasket including one magnesium Rod as required in Bajaj Geyser of Model No CALDIA 25 (150756) complete all as directed. Make Bajaj/Recold/Theeta (As per Sample held with AGE I office). |
| 58 | S & F in replacement of geyser heating element suitable for Recold make geyser of capacity 25 Ltrs including nut,bolt,washer etc complete all as specified and directed. Make: Racold or as per existing sample. |
| 59 | S & F in replacement of geyser therostat suitable for Recold make geyser of capacity 25 Ltrs including nut,bolt,washer etc complete all as specified and directed. Make: Racold or as per existing sample. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender