Public Administrative Department Local Bodies Closing in 5 days TDR #57542991

Tender For Repairing Of Vindhan Wells, Hand Pumps, Submersible Pumps In The City On Contract Basis For Municipal Council Dharashiv, Repair Of Headworks Pump/Motor/Starter On Monoblock Water Supply Scheme, New Submersible Pump, Motor Etc., Borewell Wo

Issued by Local Bodies · Osmanabad, Maharashtra
Tender Value
35 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
5 days left
EMD
35000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Osmanabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Repairing Of Vindhan Wells, Hand Pumps, Submersible Pumps In The City On Contract Basis For Municipal Council Dharashiv, Repair Of Headworks Pump/Motor/Starter On Monoblock Water Supply Scheme, New Submersible Pump, Motor Etc., Borewell Works As Required (Second Time).

BOQ

Name of Work:- नगरपरिषद धाराशिव करिता दर करार पद्धतीने शहरातील विंधन विहिरी, हातपंप, सबमर्सिबल पंप दुरुस्ती करणे, मोनोब्लॉक पाणी पुरवठा योजना वरील हेडवर्क्स पंप/मोटार/स्टार्टर दुरुस्ती, आवश्यकतेनुसार नवीन सबमर्सिबल पंप, मोटार ईत्यादी, बोरवेल विषयक कामे करणे (दुसरी वेळ).
Sl. No. Item Description
1Rewinding Motors, Monoblock, Submersible pumps, Fans etc
2Rewinding the motor of table / pedestal / wall bracket / cabin fans of all type and makes including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing for original speed and consumption with guarantee for 1 year including transportation from site and back
3Rewinding the motor of the ceiling fan 900mm of all types, makes and over hauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc.& testing for original speed and consumption with guarantee for one year
4Rewinding the motor of the ceiling fan 1200 mm / 1400 mm of all types ,makes and over hauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. & testing for original speed and consumption with guarantee for one year.
5Rewinding the motor of the Exhaust fan 900 / 1400 RPM 300 mm of all types, makes and over hauling including minor repairs, lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. & testing for original speedand consumption with guarantee for one year
6Rewinding of electric motor above 5 H.P. upto 7.5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
7Rewinding of electric motor above 7.5 H.P. upto 10 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
8Rewinding of electric motor above 10 H.P. upto 12.5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
9Rewinding of electric motor above 12.5 H.P upto 15 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
10Rewinding of electric motor above 15 H.P. upto 20 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
11Rewinding of electric motor above 20 H.P. upto 25 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
12Rewinding of electric motor above 25 H.P. upto 30 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
13Rewinding of submersible pump motor in Borewell of all types and makes up to and including 5 HP with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.
14Rewinding of submersible pump motor in Borewell of all types and makes above 5 H.P. up to 25 H.P with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.
15Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase up to 1 H.P. of all types with Required alignment of the shaft and testing the same
16Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase 1.5 H.P. to 2 HP of all types with Required alignment of the shaft and testing the same
17Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase 3 HP to 7.5 HP of all types with Required alignment of the shaft and testing the same..
18Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase 10 H.P. of all types with Required alignment of the shaft and testing the same
19Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase 12.5 H.P.to 20 H.P. of all types with Required alignment of the shaft and testing the same.
20Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase above 20 H.P. to 30 H.P. of all types with Required alignment of the shaft and testing the same
21Replacing the existing ball bearing of table/ cabin/ pedestal/ ceiling/ exhaust fan complete with alignment of shaft & testing the same.
22Supplying and replacing No-Volt-Coil for motor having DOL starters up to 7.5 H.P.
23Supplying and replacing No-Volt-Coil for motor having DOL starters from 7.5 H.P. to 10 H.P.
24Supplying and replacing No-Volt-Coil for motor having Star-Delta Starter from 12.5 H.P. to 15 H.P. motor.
25Supplying and replacing No-Volt-Coil for motor having Star-Delta Starter from 15 H.P. to 25 H.P. motor.
26Supplying and replacing No-Volt-Coil for motor having Star-Delta Starter from 20 H.P. to 30 H.P. motor.
27Supplying and replacing No-Volt-Coil for motor having Star-Delta Starter from 25 H.P. to 35 H.P. motor.
28Supplying and replacing No-Volt-Coil from 30 H.P.to 90 H.P. motor starter.
29Supplying and replacing thermal over load relay for motor starter 40 H.P. to 50 H.P.
30Supplying and replacing thermal over load relay for motor starter 60 H.P. to 90 H.P.
31Supplying & replacing contactor for DOL motor starter from 7.5 H.P. to 10 H.P.
32Supplying and replacing contactor for motor starter suitable for above 30 H.P. to 40 H.P.
33Supplying and replacing contactor for motor starter suitable for 75 H.P. to 90 H.P.
34Supplying and replacing contactor for motor starter suitable for 100 H.P. to 125 H.P.
35Replacing suitable capacity motor of water pump of air cooler of any capacity and type in lieu of old one.
36New Submersible Motors and accessories
37Supplying and erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 120 to 390 LPM discharge at 55 to 11 m head & discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP
38Supplying and erecting minimum Three & above star rated submersible pump set of 3.75 KW/5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 60 to 290 LPM discharge at 112 to 12 m head & discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP
39Supplying and erecting minimum Three & above star rated submersible pump set of 3 KW/4 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 200 to 750 LPM discharge at 29 to 7 m head & discharge & delivery Pipe of Size-75 mm diameter with a necessary H type clamps as per specification No. WP-SMP
40Supplying and erecting minimum Three & above star rated submersible pump set of 5.625 KW/7.5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 100 to 400 LPM discharge at 132 to 27 m head & discharge & delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification No. WP-SMP
41Supplying & erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assemblycomplete.
42Supplying & erecting flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete
43Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure withIP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .
44तेर पंप हाऊस 120 हॉ.पॉ.विद्युत मोटार , स्टार्टर दुरुस्ती
45120 हॉ.पॉ. विद्युत मोटार रिवायडींग करने काढणे बसविणे दुरुस्तीत व वर्कशॉप कामासह वाहतुकीसह
46120 हॉ.पॉ. मोटारीस बेअरींग बसविणे खोलफिटींग करने व वर्कशॉप कामासह
47120 हॉ.पॉ. मोटार काढुण दुस-या असेंब्लीवर बसविणे
48120 हॉ.पॉ. मोटारीच्यास केबलला कॉपर लग्जस बसविणे व स्टाहर्टरच्या लग्जत बसविणे
49120 हॉ.पॉ.पंपाची बॉऊल असें ब्लील खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्तीव करने वाहतुकीसह
50पुर्ण एम.ई.आय स्टर्टर रिपेअरींग करने व खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने वाहतुकीसह
51अॅटो ट्रासफॉर्मर रिवायडींग करने व खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने वाहतुकीसह
52स्टार्टरच्या केबलला व मोटरच्या केबलला अल्युमिनीयम लग्ज बसविणे
53मोटार पॅनल बोर्डातील साहित्य दुरुस्ती करने
54उपळा बुस्टफर 100 हॉ.पॉ. विद्युत मोटार दुरुस्ती
55100 हॉ.पॉ. मोटार रिवायडींग करने खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने वाहतुकीसह
56100 हॉ.पॉ. मोटारीस बेअरींग बसविणे वर्कशॉप काम करने व खोलफिटींग सह व वाहतुकीसह
57100 हॉ.पॉ. मोटारीच्या केबलला अॅल्युकमिनियम लग्ज बसविणे
58100 हॉ.पॉ. मोटारीस बेअरींग बसविणे शॉप्ट झीज झालेला गाळा भरणे, बुशींग तयार करुन बसविणे वर्कशॉप कामासह व वाहतुकीसह
59100 हॉ.पॉ. मोटारीस व स्टार्टरला कॉपर लग्ज बसविणे व त्यास लागणारे साहित्यासह
60रुईभर पंप हाऊस 125 हॉ.पॉ. विद्युत मोटार, स्टार्टर दुरुस्ती
61125 हॉ.पॉ. विद्युत मोटार रिवायडींग करने काढणे बसविणे दुरुस्ती् करने वर्कशॉप कामासह
62125 हॉ.पॉ.पंपाची बॉऊल असेंब्ली खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने
63125 हॉ.पॉ. मोटारीस बेअरींग बसविणे खोल फिटींग सह वर्कशॉप कामासह
64100 हॉ.पॉ. व 125 हॉ.पॉ. मोटारीचे टर्मीनल प्लेट (कनेक्शन प्लेट) बदलणे
65125 हॉ.पॉ. मोटारीच्या आतील कनेक्शनसाठी कॉपर लँग्ज सॉल्डर करुन बसविणे
66पुर्ण जे.एम.पी स्टा्र्टर दुरुस्ती करने
67जे.एम.पी स्टासर्टरचे फिक्सु अॅड मुहींग कॉटेक्ट बदलणे
68एन.ओ.सी कॉईल बदलणे.
69जे.एम.पी स्टालर्टरचा अॅटो ट्रान्स फार्मर रिवायडींग करने खोलफिटींग वाहातुकीसह
70स्टार्टरच्या केबलला अॅल्युमिनीयम लँग्ज बसविणे
71ओ.सी.बी. 300 अॅम्पीअर दुरुस्ती करने
72मेन पॅनल बोर्डातील दुरुस्ती करने मेन स्वीच व इतर साहित्य् दुरुस्ती करणे ओ सी बी चे कॉटेक्ट कॉईल व इतर साहित्य बदलून दुरुस्ती करुन चालु करुन देणे
73रुईभर पंप हाऊस 125 हॉ.पॉ. विद्युत मोटार, स्टार्टर दुरुस्ती
74125 हॉ.पॉ. विद्युत मोटार रिवायडींग करने काढणे बसविणे दुरुस्ती् करने वर्कशॉप कामासह
75125 हॉ.पॉ.पंपाची बॉऊल असेंब्ली खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने
76125 हॉ.पॉ. मोटारीस बेअरींग बसविणे खोल फिटींग सह वर्कशॉप कामासह
77100 हॉ.पॉ. व 125 हॉ.पॉ. मोटारीचे टर्मीनल प्लेट (कनेक्शन प्लेट) बदलणे
78125 हॉ.पॉ. मोटारीच्या आतील कनेक्शनसाठी कॉपर लँग्ज सॉल्डर करुन बसविणे
79पुर्ण जे.एम.पी स्टा्र्टर दुरुस्ती करने
80जे.एम.पी स्टासर्टरचे फिक्सु अॅड मुहींग कॉटेक्ट बदलणे
81एन.ओ.सी कॉईल बदलणे.
82जे.एम.पी स्टालर्टरचा अॅटो ट्रान्स फार्मर रिवायडींग करने खोलफिटींग वाहातुकीसह
83स्टार्टरच्या केबलला अॅल्युमिनीयम लँग्ज बसविणे
84ओ.सी.बी. 300 अॅम्पीअर दुरुस्ती करने
85मेन पॅनल बोर्डातील दुरुस्ती करने मेन स्वीच व इतर साहित्य् दुरुस्ती करणे ओ सी बी चे कॉटेक्ट कॉईल व इतर साहित्य बदलून दुरुस्ती करुन चालु करुन देणे
86submersible pump30 HP सबमर्सिबल पंप रिवायान्डींग करणे. (खोल फिटिंग सह)
8730 HP सबमर्सिबल पंप केबल जोईंट करणे.
8840 HP सबमर्सिबल पंप रिवायान्डींग करणे. (खोल फिटिंग सह)
8940 HP सबमर्सिबल पंप केबल जोईंट करणे.
9050 HP सबमर्सिबल पंप रिवायान्डींग करणे. (खोल फिटिंग सह)
9150 HP सबमर्सिबल पंप केबल जोईंट करणे.
92र्स्‍टाटरचा एक कॉटेक्‍ट नादुरुस्‍त झाल्‍यास बदलणे
93अॅटो ट्रान्‍सफार्मर रिवायडींग करने
94र्स्‍टाटर केबलला लग्‍ज बसविणे
9540 हॉ.पॉ.मोटारीचे मेन पॅनल बॉक्‍स मधील मेनस्‍वीच दुरुस्‍ती करने व इतर दुरुस्‍ती
9620 हॉ.पॉ. मोनो ब्‍लॉक मोटार रिवायडींग करने
9720 हॉ.पॉ. मोनो ब्‍लॉक मोटारस वारनीसिंग व सर्विसिंग करने
9820 हॉ.पॉ. मेन ब्‍लॉक मोटारीचे निकामी झालेली बेअरींग काढुन नवीन बेअरींग बसवणे
9920 हॉ.पॉ. मोनो ब्‍लॉक मोटारीचे बुशींग रोटर शॉप्‍ट वर्कशॉप करने.
100उजणी पंपहाऊस व खांडवी पंप हाऊस मोटर, स्टार्टर दुरुस्ती
101300 ते 400 एच.पी. मोटर रिवायडिंग करणे.
102300 ते 400 हॉ.पॉ. मोटारीच्या आतील कनेक्शन वायरचे कॉपर लग्ज जळलेले नविन लग्ज सोल्डर करून बसविणे
103300 ते 400 हॉ.पॉ. ची बॉउल असेंब्ली खोलणे व दुरूस्ती करून फिटींग करून चालू करून देणे
104300 ते 400 हॉ. पॉ. मोटारीस नादुरूस्त झालेली बेअरींग खोल फिटींग करून बसविणे वर्कशॉप कामासह
105300 ते 400 हॉ. पॉ. मोटारीचे जळालेली कनेक्शन प्लेट काढून नविन बसविणे
106300 ते 400 हॉ.पॉ. फुली ऍ़टोमॅटीक स्टार डेल्टा स्टार्टर ( किर्लोस्कर कंपनी ) नादुरूस्त झालेले दुरूस्ती करून देणे
107300 ते 400 हॉ.पॉ. ABB कंपनी HTS फूल्ली ऍ़टोमॅटीक स्टार डेल्टा स्टार्टर नादुरूस्त झालेले दुरूस्ती करून देणे
108300 ते 400 एच.पी. फुल्ली अटोमॅटीक स्टार डेल्टा स्टार्टरचा अटो ट्रॉन्सफार्मर रिवांयडींग करणे
109ACB - 1600AV दुरूस्ती करणे
110मेन पनॉल बॉक्स मधील दुरुस्ती करणे
111हातपंप दुरुस्ती, बोअरवेल दुरुस्ती ईतर साहित्यSupplying and erecting high density polythene pipe ISI mark 32 mm dia. suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete
112Supplying and erecting high density polythene pipe ISI mark 40 mm dia. suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete.
113Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected to jet/submersible pump with required material complete
114Supplying and erecting non return valve 25 mm dia in position made of gun metal complete.
115Supplying and erecting non return valve 40 mm dia in position made of gun metal complete.
116Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.
117Supplying and erecting 40 mm. dia. gun metal sluice valve at position with necessary materials complete.
118Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete
119Supplying and erecting 65 mm dia. gun metal sluice valve at position with necessary materials complete.
120Supplying and erecting 75/80 mm dia. gun metal sluice valve at position with necessary materials complete
121हातपंप बोअरमधुन काढणे व दुरुस्तीकरुन बोअरमध्ये टाकणे
122हातपंपाचे सिलेंडर दुरुस्त करणे
123हात पंपाचा नविन ओटा तयार करणे (सर्व साहित्यासह)
124जी. आय. पाएपास थ्रेडींग करणे ( 2 ईंच पर्यंत)
125जी. आय कपलींग ( 2 ईंची पर्यंत)
126बोअरवेल मधुन मोटर काढणे ब परत बसविणे
127विंधन विहिरीमध्ये ३०० फुटापर्यंत अडकलेला सबमर्सीबल पंप काढणे
128300 फुट विंधन विहिरीतील पंप न निघाल्यास पाईप व केबल काढून बोअर कटर मशीनद्वारे साफ करणे व रिबोअर करणे.
129विंधन विहिरीमध्ये ३०० ते ४०० फुटापर्यंत अडकलेला सबमर्सीबल पंप काढणे
130300 फुट ते ४०० फुटा विंधन विहिरीतील पंप न निघाल्यास पाईप व केबल काढून बोअर कटर मशीनद्वारे साफ करणे व रिबोअर करणे.
131विंधन विहिरीमध्ये ४०० फुट व त्यावरील अडकलेला सबमर्सीबल पंप काढणे
132४०० फुट व त्यावरील विंधन विहिरीतील पंप न निघाल्यास पाईप व केबल काढून बोअर कटर मशीनद्वारे साफ करणे व रिबोअर करणे. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57542991
AUTHORITY Local Bodies
TENDER VALUE 35 Lakhs
LAST DATE 24-09-2026
Authority
Authority Name Directorate Of Municipal Administration
Work Description Tender for Repairing Of Vindhan Wells, Hand Pumps, Submersible Pumps In The City On Contract Basis For Municipal Council Dharashiv, Repair Of Headworks Pump/Motor/Starter On Monoblock Water Supply Scheme, New Submersible Pump, Motor Etc., Borewell Works As Required (Second Time).
Basic Detail
Tender No O.No/4793/2026,Dt.15/09/2026
Bidding Type Tender
Location
City Osmanabad
State Maharashtra
Key Dates
Publish Date 16 Sep 2026
Submission Date 24 Sep 2026
Open Date 25 Sep 2026
Finance
Tender Value 35 Lakhs
Tender Fee 600
EMD 35000
Exemption Not Available
Document List
bbb0addc-2865-4a82-8577-0945042ff1f4.html
BOQ_2289497.xls
ScheduleAsubtender.pdf
Tendernotice_1.pdf
wetenderbooklet2.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Sep 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

bbb0addc-2865-4a82-8577-0945042ff1f4.html

xls

BOQ_2289497.xls

pdf

ScheduleAsubtender.pdf

pdf

Tendernotice_1.pdf

pdf

wetenderbooklet2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders