Tender For Construction Of A 5X5 M Span Box Culvert,1570 Meter Approach Road And Additional Approach Road In Between Of Semramau To Mehruniya In Middle Of Behta Nale At Dist-Hardoi
Tender Value
1.88 Crore
Estimated cost
Bid Submission
25 Sep 2026
8 days left
EMD
11.40 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hardoi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A 5X5 M Span Box Culvert,1570 Meter Approach Road And Additional Approach Road In Between Of Semramau To Mehruniya In Middle Of Behta Nale At Dist-Hardoi
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m (Rates are Including Labour Cess but Excluding GST) |
| 2 | Plain cement concrement 1:3:6 nominal mix in foundation with crushed aggregate 40 mm nominal size mechanically mixed,placed in foundation and compected by vibration including curing for 14 days. (Rates are Including Labour Cess but Excluding GST) |
| 3 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification Clause 305.3.9 (Rates are Including Labour Cess but Excluding GST) |
| 4 | Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC M 30 (Rates are Including Labour Cess but Excluding GST) |
| 5 | Supplying, fitting and placing un-coated mild steel reinforcement in foundation complete as per Drawing and Technical Specifications. (HYSD) (Rates are Including Labour Cess but Excluding GST) |
| 6 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (Rates are Including Labour Cess but Excluding GST) |
| 7 | Drainage Spouts complete as per drawing and Technical specification (Rates are Including Labour Cess but Excluding GST) |
| 8 | Furnishing and placing reinforced cement concrete in super structure as per drawing and Technical Specifications. (RCC Grade M 20) (Rates are Including Labour Cess but Excluding GST) |
| 9 | Providing and laying filter material underneath pitching in slope complete as per drawing and Technical Specification. (Rates are Including Labour Cess but Excluding GST) |
| 10 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. (Rates are Including Labour Cess but Excluding GST) |
| 11 | Construction of embankment with approved material obtained from availble land as permitted and approved by Engineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1, with all lifts and leads, spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5 (SOR No. 253) (Rates are Including Labour Cess but Excluding GST) |
| 12 | Providing ,Laying and spreading material on a prepared subgrade ,adding cement @ 2 % by weight to the spread material manually,mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub base. (Rates are Including Labour Cess but Excluding GST) |
| 13 | Providing ,Laying and spreading material on a prepared subbase ,cement @ 4 % by weight to the spread material manually,mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base. (Rates are Including Labour Cess but Excluding GST) |
| 14 | Providing and applying tack coat with Bitumen (VG-10) using bitumen distributor at the rate of 0.35 kg per sqm on the prepared non bituminous surfaces cleaned with Hydraulic broom as per Technical Specification Clause 503. (Rates are Including Labour Cess but Excluding GST) |
| 15 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508. (Rates are Including Labour Cess but Excluding GST) |
| 16 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, as per Technical Specification Clause 510 (Rates are Including Labour Cess but Excluding GST) |
| 17 | Construction of shoulder with approved material obtained from availble land as permitted and approved by Engineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1, with all lifts and leads, spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5 (Rates are Including Labour Cess but Excluding GST) |
| 18 | Excavation in soil using hydraulic excavator and tipper with disposal upto 1000 m excavation for roadwork in soil with hydraulic excavator of 0.90 Cum bucket capacity including cutting and loading in tipper, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-section and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per technical specification clause 302.3. (Rates are Including Labour Cess but Excluding GST) |
| 19 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Rates are Including Labour Cess but Excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender