Tender For Electrical Work For The Installation Of Decorative Electric Poles And Led Lights For The Beautification Of Eco Herbal Park Located In Sector-09, New Moradabad Scheme.
Tender Value
1.73 Crore
Estimated cost
Bid Submission
06 Oct 2026
5 days left
EMD
3.46 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Moradabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Electrical Work For The Installation Of Decorative Electric Poles And Led Lights For The Beautification Of Eco Herbal Park Located In Sector-09, New Moradabad Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of 3.6mtr Decorative pole made of cast Iron available with wide variety of bracket designs Base Dia-375mm, Base Plate -320x10mm MFHD - 210A (with Foundation Bolt & Electrical Accessories) complete work in all respect as per direction of E/I. (May Fair, Vak Light, Jaquar)SPECIFICATION,1.Material for Tubes : As Per IS. 1161/IS. 1239. 2.Material for Base Plate : Steel of Grade E250 to IS 2062:2011.3.Pole coated with epoxy zinc phosphate primer and finished using environmentally atable polyurethane based paint. 4.The Control Gear Tray Has Provision of With MCB & Terminal Connectors For Loop in Loop-Out Arrangement and Provided Seperately. |
| 2 | Supply and fixing of Light LED decorative drop down light made of aluminium housing fitted with PMMA diffuser. MF MVF 507D, 100w (with Philips/Fulham Driver) Dia 370mm. complete work in all respect as per direction of E/I. (May Fair, Vak Light, Jaquar, halonix) |
| 3 | Supply and installation of 7mtr Decorative Pole 7mtr Decorative Pole made of square pipe duiy CNC laser cut illuminated cutomised design fitted with IP 65 Led module.Pipe Dia 100x100mm, Base Plate-250x250x12mmMFMD-115A,100W (with Foundation Bolt-20x600x4nos) With Electrical Accessories (Bakelite Sheet, Chanel, MCB, Connector) (P.S.R)complete work in all respect as per direction of E/I. (May Fair, Vak Light, Jaquar) |
| 4 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. complete work in all respect as per direction of E/I. (PWD SOR Item NO 501/ 2018) 10 Sq.mm. x 4 core 501(h)/2018 |
| 5 | 16 Sq.mm. x 4 core 501(i)/2018 |
| 6 | 70 Sq.mm. x 3-1/2 core 501(m)/2018 |
| 7 | 95 Sq.mm. x 3-1/2 core 501(n)/2018 |
| 8 | S/F of palm or pin type copper tin planted cable socket (lug) to the cable leads etc. comp. (504/2018)10 Sq.mm. 504(c)/2018 |
| 9 | 16 Sq.mm. 504 (d)/2018 |
| 10 | 70 Sq.mm. 504 (h)/2018 |
| 11 | 95 Sq.mm. 504 (i)/2018 |
| 12 | S/E of Double walled corrugated HDPE pipe size 90/63 mm at a depth of 1.20 mtr. Below ground level complete excavation and back filling (Rate includes manual trunch less if required) complete work as per direction of E/I. |
| 13 | S/W of submain with two number 2.5 mm. PVC insulated 1100 V grade single core copper conductor cable in 20 mm dia. heavy guage rigid steel conduit on surface, with one number 8 SWG GI earth continuity wire etc, complete in all respects {289 SOR-2018} |
| 14 | S & F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve S.I.no. 1002(CAT A)/2018 |
| 15 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 807(PWD)SOR-2018(F)(ii) 40 A TPN |
| 16 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable enteies Electrical control panel with TPN MCCB's (Four pole 36 KA with thermal maganatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F., KW etc.) in each phase with touch type selector switches for different reading, instrument fuses, current transfomer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B only.Incoming200 Amp. MCCB-1 NoOutgoing(a) 100 Amp. MCCB-2 Nos.(ii) Cat. B. Pannel Cubicle Type each 812/2018 |
| 17 | Supply and Fixing of Tape off box 125 Amp to 200 Amp TPN for Sandwich alumininum bus bar trunking complete in all respect. 930 (PWD)SOR-2018 |
| 18 | S/F og G.I. pipe 100mm dia 'B' class for climbing up the cable from ground to overe head line (P.S.R.) |
| 19 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer Gl pipe of 16 swg and inner Gl pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.L. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.1. strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. (S.I.No-725 (A) PWD Schedule-2018) |
| 20 | Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects as approved by Engineer-in-charge.710(PWD)SOR-2018 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender