Tender For Improvement Works Of The Existing Assistant Engineer/O&M/Palaviduthi Office Toilet And Provision Of Water Storage Sump,Etc.,In Palaviduthi 33/11Kv Substation Premises At Karur.
Tender Value
2.40 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
9 days left
EMD
2400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Works Of The Existing Assistant Engineer/O&M/Palaviduthi Office Toilet And Provision Of Water Storage Sump,Etc.,In Palaviduthi 33/11Kv Substation Premises At Karur.
BOQ
| Sl. No. | Item Description |
| 1 | Name of the works |
| 2 | Chipping of concrete and roughening the surface including cost of labour charges etc.,complete. |
| 3 | Chipping of old damaged plastered walls with clean removal of cement plaster from walls and racking out joints 20 mm deep for replastering including cost of all materials, labour, lead, lift etc complete. |
| 4 | Dismantling of wooden doors, windows and clearing away and stocking the materials suitable for reuse as directed by the Engineer incharge of work including cost of all labour, lead, lift etc., complete. |
| 5 | Dismantling the existing terracing of pressed roof tiles work and removing them away as directed by the depatment engineer in charges including cost of labour , lead, lift, scaffloding charges etc complete. |
| 6 | Dismantling Plain Cement Concrete removing them away as directed by the depatment engineer in charges including cost of labour , lead, lift, scaffloding charges etc complete. |
| 7 | Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete. |
| 8 | Earthwork excavation in soft disintegrated rock laterite soft rock or kankar not requring blasting, etc, complete |
| 9 | Earthwork excavation in medium rock and dense medium rock not requiring blasting. |
| 10 | Supplying and filling of M sand in foundation and basement with well watering and consolidation as per std.specn. including cost of all labour, lead, lift, etc, complete. |
| 11 | PCC 1:4:8, using 40mm HBG metal foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete. |
| 12 | RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone without formwork including cost of all materials, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement (Raft ) |
| 13 | Brick work in CM 1:3 using II class bricks of size 9\\" x 4 3/8\\" x 2 3/4 \\" including cost of all material, lead, lift, labour, etc, complete. |
| 14 | RCC1:1 1/2:3 using 12mm to 20 mm HBG metal (machine crushed) for 150mm thick roof slab concrete with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete but excluding cost of steel reinforcement. |
| 15 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 16 | Replastering with CM 1 : 2, 20 mm thick over the surfaces applied with Nitrozinc primer and Nitrobond EP after mixing DR.FIXIT in the cement mortar including cost of all materials, labour for scaffolding etc complete. |
| 17 | Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 18 | Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 19 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface etc., complete complying with standard specification. |
| 20 | Flooring with approved spartex ceramic of non slippery type tiles over cement mortar 1:3,12mm thick including pointing with white cement finishing the joints, flush pointing the surface etc., complete. |
| 21 | Dadooing with glazed tiles of best approved quality of make johnson, neycer etc., over cm 1:3, 10mm thick including cost of all materials, labour, lead, lift, etc., complete. |
| 22 | Supply,transport and fixing of 1000 litre PVC sintex tank over the roof. |
| 23 | Providing pvc down fall pipe using 110mm dia 4 KSC, PVC pipe and pvc clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, lead, lift, etc., complete, including cost of PVC accessories and washers. |
| 24 | Providing and fixing sanitary fitting consisting of parryware of oriya patten Indian Water Closet with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete. |
| 25 | Supplying and fixing of wash basin of size 560x410 mm of approved quality neycer/parrys ISI including cost of wash basin with pedastal cock fixing using rag bolt and nut 15mm dia pvc connecting hose and outlet using 50mm dia pvc waste water pipe for outlet cp angle valve with all accessories including cost of all materials, labour, lead, lift, etc., complete. |
| 26 | Supplying and laying pvc pipe 32 mm outer dia 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete |
| 27 | Supplying and laying pvc pipe 25 mm outer dia 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete |
| 28 | Supplying and fixing inposition of 32mm dia gate valve of best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. |
| 29 | Supplying and fixing of 15mm dia screw down tap with necessary specials including cost of all materials lead, lift, labour etc.,complete. |
| 30 | Supplying and fixing of 110mm dia PVC pipe, cowl for ventilating shaft., to a height of 10' length with proper B.W. with C.M.1:5mix plastering 12mm thick including cost of all materials, lead, lift etc. Complete. |
| 31 | Fabrication,supply & fixing of critol type steel ventilator as per IS 1038 using steel sections confirming to IS 7452 with centre hung shutterswith 4mm thick pin head glass and 8mm square horizontal (0.75mx0.45m) including cost all materials labour etc complete. |
| 32 | Providing and fixing of ABS (Acrolynitrile Butadiene Styrene)Door using factory made plain FPVC (Foamed Polyvinyl Chloride) door frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 10 Nos. of 50mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners to be provided for each vertical member, stiffeners of („U‟ Channel of size 29 x 9 x 1mm, 150mm long) 3 Nos. at hinge point, frame reinforcement of („U‟ GI Channel of size 46 x 22 x 0.06mm), bottom tie rod of („U‟ GI Channel size of 15 x 15 x 1mm), the ABS Shutter of 35mm thick factory made plain pre-laminated. ABS (Acrolynitrile Butadiene Styrene) door shutter moulded in different designs, consisting of all round Frame made out of Water Proof solid foam PVC bar of size 20x32mm, reinforced by 32 x 32mm - 2 Nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of ball bearing butterfly hinges - 3 Nos. for each shutter and ISI make SS round lock complete, including cost of Materials, conveyance and all other incidental charges and labour charges for fixing the Door neatly etc., complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work |
| 33 | Supply and fixing of single boxtype4'40W fluorescent fitting complete with copper choke and condensor with TW roundblocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender