Tender For Addition / Alteration / Improvement To Building No T-4 (Left Over Portion) At Afac Coimbatore
Tender Value
19.79 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
3 days left
EMD
39600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition / Alteration / Improvement To Building No T-4 (Left Over Portion) At Afac Coimbatore
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 2 | Material & Labour for Rendering with WPC in CM 1:4, 15mm thick on othe than fair faces of brick work or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately |
| 3 | Material & Labour for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 4 | Material & Labour for applying two coats of cement base paint over primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 5 | Material & Labour for prepation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer over 3mm thick wall care putty on wall on wall complete all as specified and as directed . |
| 6 | Supply only Intergral waterproofing compound complete all as specified and as directed . |
| 7 | Material & Labour for providing anti-termite treatment (post construction) of voids in masonry using chemical emulision one litre per hole at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand ) to match the existing floors complete all as specified and as directed .(Note : work executed by specialized agency who is active member with Indian Pest Control Association) |
| 8 | Material and labour for complete removal of existing treatment from old wall surfaces and finishing walls with Acrylic Smooth exterior paint of required shade over priming coat of exterior primer complete all as specified and as directed . (Height of bldg upto 15 mtrs) |
| 9 | Material and labour for complete removal of existing treatment from old wall surfaces, applying plaster of paris putty of 2 mm thickness and applying two coats of acrylic emulsion distemper over a coat of chalk whiting primer complete all as specified and as directed. |
| 10 | Demolition of Cement concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed . |
| 11 | Material & Labour for plain cement concrete 75 mm thick of 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in levelling course of sub floors, sub-base, floors and paving etc., complete all as specified and directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed . |
| 13 | Material & Labour for Non Skid ceramic(rectified desugner tiles) joint free colourred tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed . |
| 14 | Material & Labour for Glazed coloured ceramic(Designer) tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm/450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, including finishing of corners with PVC beading all as specified and as directed. |
| 15 | Material & Labour for Screed bed or bedding layer of mortor 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed . |
| 16 | Material & Labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match light shade complete all as specified and as directed . |
| 17 | Material & Labour for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. (Note : Work executed by specialized agency who is active member with Indian pest Control Association) |
| 18 | Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match light shade complete all as specified and as directed . |
| 19 | Material & Labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dadocomplete all as specified and as directed . |
| 20 | Material & Labour for Anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm all complete all as specified and as directed . |
| 21 | Material & Labour for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed . |
| 22 | Material & Labour for Perforated particle board/ tiles 16mm thick for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and as directed . |
| 23 | Dismantling ceiling boards any description any thickness including cover fillets/grid system etc all as specified and directed |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed |
| 25 | Supply & Fixing for Sheet glass,4.00 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane . |
| 26 | Supply and fix in repairs for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed. |
| 27 | Material and labour for preparation of old wood & wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 28 | Material and labour for preparation of old steel surface over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed |
| 29 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 30 | Material & Labour for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 31 | Taking down chowkhats or frames with out taking off the shutters from the frames exceeding 1.50 sqm and not exceeding 4.00 sqm each and stacking for issuing under credi tcomplete all as specified and as directed . |
| 32 | Supply & Fixing for Second class hard wood plain solid chowkhats and frames wrought framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints, complete all as specified and as directed . |
| 33 | Material & Labour for providing anti -termite treatment (Post construction ) At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the sameto match with the existing surface complete all as specified and directed. ( Note : Work executed by specialized agency who is active member with Indian pest control association) |
| 34 | Supply & Fixing for 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and as directed . |
| 35 | Material & Labour for Second class hard wood Glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, guaze etc. (without sash bars) edges of framing plain chamferred or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I kiln seasoned and chemically pressure treated complete all as specified and as directed . |
| 36 | Supply & Fixing for Floor Door Stopper of Aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors 140 mm complete all as specified and as directed . |
| 37 | Supply & Fixing for Butt hinges medium weight cold rolled mild steel, and fixed 100 mm size complete all as specified and as directed . |
| 38 | Supply & Fixing for Aluminium anodised barrel tower bolts extruded section 200 mm size complete all as specified and as directed . |
| 39 | Material & Labour for Aluminium die cast body Door closer hydraulically regulated,designation No. 3,universal type,suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed . |
| 40 | Supply & Fixing for 600mm x 450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed . |
| 41 | Supply & Fixing for Extruded aluminium alloy handles fabricated type anodised size 150 mm complete all as specified and as directed . |
| 42 | Supply & Fixing for Aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long complete all as specified and as directed . |
| 43 | Material & Labour for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfacescomplete all as specified and as directed . |
| 44 | Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 15mm bore complete all as specified and as directed . |
| 45 | Supply & Fixing for Unplasticised PVC of 20mm dia pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type, complete all as specified and as directed . |
| 46 | Supply & Fixing in repair floor mounted EWC vitrous china colour/white , P or S trap,including connection to drain or out going pipe and to flushing pipe with plastic water closet seat white pattern , flat bottom and cover including MS CP hinges complete all as specified and as directed .Make : Parryware . Model No C0297/C0278 or equivalent in CERA Sanitary ware/RAK Ceramics/Jaquar/Hindware/Johnson/Kajaria Sanitary Ware |
| 47 | Supply & Fixing in repair Vitreous China wash basin, white, flat back, size500 x 400 x190mm including waste coupling & brackets for fitting complete make : parryware , model No C0476equivalent in CERA Sanitary ware/RAK Ceramics/Jaquar/Hindware/Johnson/Kajaria Sanitary Ware |
| 48 | Supply & Fixing in repairs splash Health faucet mild steel chromium plated suitable for 20 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified including taking down of existing one complete all as per specified.Make : Parryware,Model :T9805A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 49 | Supply & Fixing in repairs Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 20 mm bore including taking down of existing one complete all as per specified.Make : Parryware,Model No :T7201A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 50 | Supply & Fixing in repairs Bib taps, brass chromium plated fancy type with wall flange screwed down, fixed for 20mm boreof Make : Parryware . Model No :T7204A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 51 | Supply & Fixing in repair stop valve/angle valve,fancy type, chromium plated, cast copper alloy screwed down,high pressure, Screwed both ends for iron pipe or for unions and fixed. all as specified & directed of Make : Parryware, Model :T7207A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 52 | Supply & Fixing for two way bib cock mild steel chromium plated suitable for 20 mm dia fixed in position complete in all respect as specified. Make : Parryware, Model No : T7234A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 53 | Supply & Fixing in repairs Polymer single flushing cistern, 10ltr capacity low level, white, with inlet, ball valve, float and handle including bracketsand flush pipe etc complete Make Parryware , Model No -Ecosmart (E8090CS) or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 54 | Supply & Fixing in repair brass chromium plated tubular towel rails (24\\") long flanges with chromium plated bracket and fixed all as directed Make : Parryware . Model No :T6901A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 55 | Material & Labour for waste fittings, brass, chromium plated for glazed ware for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed dia 32mm including taking down of existing one complete all as per specified. |
| 56 | Supply & Fixing for PVC connections 15 mm size with PTMT nuts of length 450 mm including taking down of existing one including taking down of existing one complete all as per specified. |
| 57 | Supply & Fixing in repair for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc complete,all as specified and directed. |
| 58 | Material & Labour for PVC (SWR) Gully trap 125/110 mm setting and jointing with solvent including taking down of existing one complete all as per specified. |
| 59 | Supply & Fixing for 75 mm radius PVC (SWR) bends complete all as specified and directed. |
| 60 | Supply & Fixing in repairs 75mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed. |
| 61 | Surface excavation not exceeding 30 cm and averaging 15 cm deep and getting out in Hard/Dense soil, complete all as specified and directed. |
| 62 | Material & Labour for 100mm thick broken stone or boulder,Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 63 | Material & Labour for Cement concrete in foundations, filling and mass concrete type D2 (1:4:8) 40 mm graded aggregate complete all as specified and directed. |
| 64 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 65 | Material & Labour for providing anti-termite treatment (post construction) along the extenal wall below concrete apron/ plinth protection using chemical emulsion (for using Chloropyriohos emulsifable concentrates conforming to IS- 8944-2055) @ 2.25 ltrs per linear meter. the hole 300 mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match with the existing floors complete all as specified and directed. (Note : Work executed by specialized agencyy who is active member with Indian Pest Control association) |
| 66 | Material & Labour for cement concrete type c-2, 1:3:6 (40mm graded aggregate) 75 mm thick in plinth protection complete all as specified and directed. |
| 67 | Material & Labour in repair for 18/19mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed. |
| 68 | Supply & Fixing in repair 100mm extruded brass handles, fabricated type polished complete all as specified and directed. |
| 69 | Supply & Fixing for brass Locks, cupboard, grade I, size 50 mm complete all as specified and directed. |
| 70 | Supply & Fixing in repair 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 71 | Supply & Fixing for Ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed. |
| 72 | Supply & Fixing for 25 mm dia SS drapery rod , including brackets, decorative knobs at both ends & curtain rings 8 Nos (minimum) complete all as specified and directed. |
| 73 | Removal of debris/building material out side the campus including loading and unloading, etc to a distance exc 5Km but n exc 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement. |
| 74 | Taking down old unserviceable point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings etc.removing materials for keeping for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified. |
| 75 | Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed. |
| 76 | Taking down Ceiling fan sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed. |
| 77 | Refixing only Ceiling fan with and including carrying out cleaning servicing, oiling and greasing of ceiling fans and connecting up including provision of cable from celling rose/ connector to fan complete all as specified and directed. |
| 78 | Material & Labour for painting of Ceiling fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. |
| 79 | Taking down exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed. |
| 80 | Refixing only exhaust fan ( In Repair) and connecting up including provision of cable from celling rose/ connector to fan complete all as specified and directed. |
| 81 | Material & Labour for painting of exhaust fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. |
| 82 | Disconnecting electric connection and taking down main switch/SPN DB/TPN DB of any size and keep in safe custody for taking credit complete and good/levelling the disturbed surfaces of wall to match with existing surface complete all as specified and directed. |
| 83 | Supply and laying PVC non metalic conduit including tees, bends, elbows, reducers, and fixing accessaries etc for telephone/TV connection of size 20 mm dia complete all as specified and directed. Note (i) Cutting chases will be Measured and paid seperately (ii) TV/Telephone cable provide by user section . |
| 84 | Supply and fixing PVC non metalic junction boxes one to four way for telephone/TV connection of size 20 mm dia complete all as specified and directed. |
| 85 | Material & Labour for concealed Point wiring one light/bell point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately. |
| 86 | Material & Labour for concealed Point wiring one ceiling/exhaust fan point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately. |
| 87 | Material & Labour for concealed Point wiring one 05 Amp Socket outlet on same board complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately. |
| 88 | Material & Labour for concealed Point wiring one switch socket outlet point 5 Amps on independent board complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately. |
| 89 | Material & Labour for concealed Point wiring with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board complete with 2.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately. |
| 90 | Supply and fixing Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed. |
| 91 | Supply and fixing Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed. |
| 92 | Supply and fixing Modular Modular Bell Push 6A 1 Module complete all as specified and as directed. |
| 93 | Supply and fixing Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 94 | Supply and fixing socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed. |
| 95 | Supply and fixing Modular fan regulator step type 120 W, 2 module complete all as specified and as directed. |
| 96 | Supply and fixing Call Bell Ding Dong AC 230 V single pole complete connecting up with flexible copperconductor cable of suitable size complete all as specified and directed. |
| 97 | Supply and fixing LED lights fitting 1 x 18/ 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 98 | Supply and fixing LED luminaire 600 mm x 600 mm 35/36 watts 240 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver holders & LED lamp suitable for any type of ceiling including cionnecting up with driver three core flexible copper conductor of suitable size all as directed. |
| 99 | Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete. |
| 100 | Supply and fix lamp holder PVC/Polycorbonate type with back plate suitable for battern/angle fittings complete all as specified and directed. |
| 101 | Supply and fix MCB DB, SPN, 08 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete all as specified and direceted. |
| 102 | Supply and fix MCB DB, TPN, 4 ways, Double door, 415 volt, isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. |
| 103 | Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, \\"B\\" Curve complete. |
| 104 | Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete. |
| 105 | Supply and fixing TPN/FP 40 to 63 Amp rating 415 V, 10 KA 'B' curve miniature circuit breaker (MCB) complete. |
| 106 | Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals. |
| 107 | Supply and fix modular TV coaial socket one module including taking down unserviceable socket all as directed |
| 108 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc and cutting chases for concealed conduit wiring,etc and making good, cutting not exc 10 cm girth |
| 109 | Material & Labour for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB all as specified and as directed by engr - in- charge. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length. |
| 110 | Material & Labour for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 2.50Sqmm inverter/UPS/Solar DB and extra connections, single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB all as specified and as directed by engr - in- charge. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length. |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender