Tender For Repair/Maint/Servicing To Rolling Shutter/Frame, False Ceiling Aluminium Joinery, Roof Sheet Gutter Valley, Plinth Protection With Allied Works At 24 Ed Af Stn Manauri
Tender Value
14.90 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
19 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint/Servicing To Rolling Shutter/Frame, False Ceiling Aluminium Joinery, Roof Sheet Gutter Valley, Plinth Protection With Allied Works At 24 Ed Af Stn Manauri
BOQ
| Sl. No. | Item Description |
| 1 | Taking down rolling shutter of size not exceeding 10 Sqm each from any position, any location including fittings and fixtures. Repairing / Replacing of unserviceable components and re-fixing on same opening in its original position after complete overhauling, greasing and oiling for smooth function and apply one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.Note: Components/Parts replaced under this item shall be measured & paid separately as supply only under respective items. |
| 2 | All as per serial Item No. 01 above but area of each rolling shutter exceeding 10 Sqm each complete as directed by Engineer-in-Charge. |
| 3 | All as per serial Item No. 01 above but complete work with out taking down of rolling shutter complete as directed by Engineer-in-Charge. |
| 4 | All as per serial Item No. 02 above but complete work with out taking down of rolling shutter complete as directed by Engineer-in-Charge. |
| 5 | Supply Only MS cranked handles for operating gear operated rolling shutters made with hardened mild steel complete all as specified & directed by Engineer-in-Charge. |
| 6 | Supply only safety lever locks of mild steel with 4 levers with two keys for rolling shutters approved/ best quality complete as directed by Engineer-in-Charge. |
| 7 | Supply only Ball Bearing for rolling shutter to match the existing complete as directed by Engineer-in-Charge. |
| 8 | Supply Only spindle/ rails of rolling shutters complete as directed by Engineer-in-Charge. |
| 9 | Supply Only steel helical wires or flat spiral spring for rolling shutters to pull out the shutters including proper greasing for smooth movements/ functions complete as directed by Engineer-in-Charge. |
| 10 | Supply & Fixing in replacement 0.8 mm thick Plain black mild steel sheeting for cover hood of rolling shutter made channel or semi round shape including twp coats of synthetic enamel pain over one coat of red oxide primer Internal or External surface complete as directed by Engineer-in-Charge. |
| 11 | Supply Only 40mm bore MS pipe for shaft of rolling shutter as per length required at site complete all as specified & directed by Engineer-in-Charge. |
| 12 | Supply Only MS pulley / wheel made with flat iron 25x 6 mm of 160mm dia for revolving of rolling shutter in shaft complete as directed by Engineer-in-Charge.. |
| 13 | Repair to locking plate/ locking arrangement by welding and providing missing part with new material using new nuts and bolts with locking arrangement for rolling shutter complete as directed by Engineer-in-Charge. |
| 14 | Supply & Fixed in replacement in position steel rolling shutters having 1.25mm thick of laths, without ball bearing, including top hood cover, anchoring rod, hasp and staple, push pull or manual type including one coat of red oxide primer fixed in position complete as directed by Engineer-in-Charge. |
| 15 | Supply & Fixed in replacement in position steel rolling shutters having 1.25mm thick of laths, without ball bearing, including top hood cover, anchoring rod, hasp and staple, gear operated type with bevel gear box and crank handle including one coat of red oxide primer fixed in position complete as directed by Engineer-in-Charge. |
| 16 | Supply and fixed in replacement safety lever locks mild steel with 4 levers for rolling shutters approved/ best quality complete as directed by Engineer-in-Charge. |
| 17 | Supply and fixed in replacement Ball Bearing for rolling shutter to match the existing complete as directed by Engineer-in-Charge. |
| 18 | Supply & Fixed in replacement in position gear box assembly complete suitable for operating rolling shutters of size up to 25 Sqm complete as directed by Engineer-in-Charge. |
| 19 | M & L for preparation of new steel surface exceeding 10 Cm width or girth and apply two coats of synthetic enamel paint complete as specified & directed. |
| 20 | M & L applying one coats of synthetic enamel paint on old steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 21 | Dismantling wrought iron mild steel work of any description etc .complete all as specified and directed. |
| 22 | S&F rolled mild steel framed work as in doors or gates of angle or other section conforming to Fe-410-S (E-250) quality-B with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 23 | S & F 1.25mm thick MS, plain black sheet in steel gates, covering to door and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints all as required |
| 24 | Dismantling asbestos cement / GI based (corrugated,semicorrugated, etc.) or any type of sheets in roof coverings including ridges, valley gutter of any type size and shape etc complete as specified & directed by Engineer-in-Charge.Note: No extra amount will paid for opening of overlapped corrugated roof sheets if requered in dismantling of valley sheet,roof coverings etc. |
| 25 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated curved steel sheet 0.50 mm thick having minimum tensile strength of 550mpa as in roof covering / cladding to wall, fixed with self-tapping screws. Pitch of corrugation 175mm -190mm centre to centre and minimum crest depth 29mm. Note:-(i) Colour of prepainted sheet will be as approved by AGE(I). |
| 26 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick having minimum tensile strength of 550mpa as in ridge, valley gutter bend to shape for fixing as required, fixed with self-tapping screws. Note:-(i) Colour of prepainted sheet will be as approved by AGE(I). No extra amount will paid for fixing of opened overlaped sheets. |
| 27 | S & F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side fixed with coach/self driving screws and washers in roof, wall etc |
| 28 | S & F 6 to 8mm thick poly carbonate sheet of colour as approved by Engr-in-Charge in roof coverings incl ridges and fixed with necessary J/J hook, fasterners etc complete as specified & directed |
| 29 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Engr-in-charge. |
| 30 | M & L for 75mm Thick Cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc.including necessary use and waste of form work and joints filled with bitumen of grade 85/25 complete all as specified and directed by Eng-in-Charge. |
| 31 | Dismantling wall and ceiling boards fiber,pulp,insulation etc any thickness including Grid, cover fillets etc complete all as specified and directed. |
| 32 | Ditto all as above but except grid or cover fillet. |
| 33 | S & F in repair ceiling 4mm thick Non asbestos fibre cement building boards only and including two coat of white wash, complete all as specified and directed. |
| 34 | S & F gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed.(except grids) |
| 35 | S & F gypsum board 12mm thick in ceiling over and including anodised aluminium snap grid frame work as per manufacturers instruction for false ceiling, size of grid 605 x 605mm complete all as specified and as directed |
| 36 | M & L for preparation of ceiling surface and applying two coats of OBD over 1.0 mm thick putty as required and as directed |
| 37 | S & F in repairs cement building board/designer E-Board only with all finishes size 595 x 595mm fixed in ceiling required complete all as specified and directed. |
| 38 | S & F grid false ceiling in GI system powder coated prelude main runner section 38 x 24 x 0.40mm, cross 'T' 28 x 24 x 0.40mm, wall angle 24 x 24 x 0.40mm and including providing and fixing 4mm thick non asbestos fibre fire resistant cement building board/designer E-Board with all finishes size 595 x 595mm fixed in ceiling frame work with all necessary hanging washers, expansion holding fasteners etc for securing framework to ceiling wherever required complete all as specified and directed. |
| 39 | Demolition and breaking up drain pipes of 100 mm dia (Salt glazed ware, AC ,PVC or reinforced concrete) set in cement mortar complete all as specified. |
| 40 | S & F 100mm PVC SWR pipes single socketed in any length laid in trenches or in floor & walls with MS clamps etc complete all as specified and directed |
| 41 | S & F PVC (SWR) bends any radius 100mm dia complete as specified. |
| 42 | Taking down chowkhat with shutter without taking off shutter from chowkhat of any description not exceeding 1.5 Sqm each complete all as specified and directed |
| 43 | S&F framed work such as grills , gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 as directed complete all as specified. |
| 44 | S & F powder coated (thickness of powder coating shall not be less than 50 micron) aluminium frame for doors, widows, ventilators with one or more tracks or rebates including joining cleats for fixing etc complete |
| 45 | S & F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 46 | S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples as directed complete all as specified. |
| 47 | S&F sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane of 5.5 mm thick as directed complete all as specified. |
| 48 | M&L PCC 1:2:4 Type B-1 using 20 mm graded aggt. as in coping/holdfast,and like including necessary use and waste of form work and surface finished and match to wall as it was previsioly painted complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender