Tender For 8573/E8 special Repair/Replacement To Lt Overhead Line Into Ug Cable, Lt Panel And Other Allied Works For Bde Hq Area At Shahjahanpur Cantt Under Ge (East) Bareilly
Tender Value
41.12 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
3 days left
EMD
82200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 8573/E8 special Repair/Replacement To Lt Overhead Line Into Ug Cable, Lt Panel And Other Allied Works For Bde Hq Area At Shahjahanpur Cantt Under Ge (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Taking down/out old defective rusted iron pole from LT line connection of any size testing and checking of cable of any material complete all as specified & directed. |
| 2 | S& Fix steel tubular swaged poles completewith cast iron base plate, finial taperplug, bolts, nuts & screws asspecified type 410 SP-31 pole (9 metres) complete all as specified. |
| 3 | Taking down old unsv cable any type of size all as specified and directed by Enge-in-charge. |
| 4 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 Sqmm 3.5 core complete all as specified and directed. |
| 5 | All as per item no.4 size here in before but 150 Sqmm 3.5 core . |
| 6 | All as per item no.4 size here in before but 120 Sqmm 3.5 core . |
| 7 | All as per item no.4 size here in before but 95 Sqmm 3.5 core . |
| 8 | All as per item no.4 size here in before but 50 Sqmm 3.5 core . |
| 9 | All as per item no .4 size here in before but 35 Sqmm 3.5 core . |
| 10 | All as per item no.4 size here in before but 25 Sqmm 3.5 core . |
| 11 | All as per item no.4 size here in before but 16 Sqmm 4 core . |
| 12 | All as per item no.4 size here in before but 10 Sqmm 4 core . |
| 13 | All as per item no.4 size here in before but 10 Sqmm 2 core . |
| 14 | All as per item no.4 size here in before but 6 Sqmm 2 core . |
| 15 | Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying under ground LT XLPE cable and getting soft/loose soil complete. |
| 16 | M&L Returning , filling in including spreading, levelling, watering and well ramming in laying not exceeding 25 cm thick in soft/loose soil complete all as specified and directed. |
| 17 | M&L Removing excavated material (soils) to a distance not exceeding 50 m and depositing whare directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 18 | M& L for sand filling under floors or in foundations 23 cm including watering and consolidation 5cm all as specified and directed. |
| 19 | M&L for laying bricks, sub class 'B' for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed. |
| 20 | S & F steel tubing GI Light grade 32 mm bore for fixing of tapping of incoming and outgoing point complete all as specified and directed. |
| 21 | S & F steel tubing GI Light grade 40mm bore for fixing of tapping of incoming and outgoing point complete all as specified and directed. |
| 22 | S & F in replacement of GI tubing light grade 80mm nominal bore for cable protection fixed with clamps of M.S. Flat iron 25x3mm, GI nuts, bolts and washers to poles/under floor/under roads/alongwith walls including two coats of aluminium paint over a coat of red oxide primer on clamps complete including taking up of old UNSV GI tubing complete all as specified and directed by Engr-in-Charge. |
| 23 | M & L for Boring under Road / PCC by using manual tool for inserting, including GI pipe of 80mm size for protection of cable complete all as specified and as directed by the Engineer-In-Charge. |
| 24 | M & L for Cutting of existing RCC Floor/PCC/Tiles for electrical cable and supply and fix tube, 'light grade, galvanised 25mm dia, necessary connection to TPN DB from LT control panel and making good to the disturbed surfaces of floor from RCC including to match the existing type etc all as directed |
| 25 | M & L cupper wire with Two core 2.5 sqmm PVC insulated 1100 volts grade connected from Security light to DB/main board with PVC conduit complete all as specified and as directed. |
| 26 | M&L Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for coping around poles, including necessary form work finishing even and smooth complite all as specified and directed . |
| 27 | S&F Sheet metal enclosure TPN distribution board vertical type double door with insulated bus bar arrangement IP 43 protection 4 way 415V complete all as specified . |
| 28 | S&F MCCB 63 Amps 16 KA 4 pole all as specified |
| 29 | M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in pole/stay/ plinth etc in foundation filling completed all as directed by Engr-in-Charge. |
| 30 | Supply and fix FRP type junction / looping box of size 280 x 170 x 130 mm top hinged with aluminium busbar of 50 Amp rating for phase and neutral on porcelain based insulator, fixed on pole with the help of MS nuts, bolts and MS clamps - 2 nos of size 40 x 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box, work also includes making suitable hole in pole to take out connections to fitting if required at site complete all as specified and directed. |
| 31 | Supply and fix testing and commissioning Out door type Bus bar made out of MS CRCA sheet 2mm thick of size 0.60 Mtrx0.60mtrx0.30 mtr consisting of cupper Bus Bar of rating 200 Amps working 4 wire system 415 volt mounted on various insulator with cable earth alleys including steel flexible pipe as per required length at site with new aluminium lugs of suitable size including making connection properly of existing cables of any size/type for existing new incoming and outgoing cables complete all as specified and as directed by Engr-In-Charge. Note : Aiuminium Bus Bar 400 Amps mounting stand made out of angle iron of size 50mm x50mm x 6mm, 600 mm high and size suitable to mount the panel including foundation of PCC (1:3:6) type C-1 using 20mm graded stone aggregate with and including excavation and earth work in any type of soil complete.Contractor should arrange factory visit to Engr-in-charge at own arrangement for LT Pannel manufacturing. |
| 32 | (a) INCOMING :- (i) Supply and fix 4 Pole MCCB ,320 Amp 50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =01 Nos(a) outgoing :- (i) Supply and fix 4 Pole MCCB ,160 Amp 50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =03 Nos |
| 33 | M&Lfor earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI strip 32x6mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 3 of SSR-2009 (Part-I). |
| 34 | Supply and fix testing and commissioning Out door type Bus bar made out of MS CRCA sheet 2mm thick of size 0.60 Mtrx0.60mtrx0.30 mtr consisting of cupper Bus Bar of rating 400 Amps working 4 wire system 415 volt mounted on various insulator with cable earth alleys including steel flexible pipe as per required length at site with new aluminium lugs of suitable size including making connection properly of existing cables of any size/type for existing new incoming and outgoing cables complete all as specified and as directed by Engr-In-Charge. Note : Bus Bar mounting stand made out of angle iron of size 50mm x50mm x 6mm, 600 mm high and size suitable to mount the panel including foundation of PCC (1:3:6) type C-1 using 20mm graded stone aggregate with and including excavation and earth work in any type of soil complete.Contractor should arrange factory visit to Engr-in-charge at own arrangement for LT Pannel manufacturing. |
| 35 | Material & Labour for supply,installing,testing & commissioning of factory made LT panel outdoor type for LT distribution switch gear and control gear,floor mounted ,cubical type modular compartment, dust and vermin proof with neoprene gasket fabricated out of CRCA sheet of thick ness not less than 3.15 mm (CPRI Approved) complete with Aluminium Bus bar of four wire system 415 volt with heat shrinkable insulator sleeve suitable for 315 A for phases and for neutral having openable front and rear shutters with suitable locking arrangement epoxy powder spray painted with one coat primercomplete including PCC 1:2:4 type B-1 using 20 mm graded stone agregate foundation raised base angle iron size 50mm x50mmx6mm thick 60cm up and 60cm ground level complete all as specified and directed by the Engr in Charge of the following components:- Contractor should arrange factory visit to Engr-in-charge at own arrangement for LT Pannel manufacturing. |
| 36 | (a) INCOMING :- (i) Supply and fix 4 Pole MCCB ,200 Amp 50 Hz 415 V, With Thermal based Release type Capacity 35 KA complete all as specified and directed =01 Nos(b) OUTGOING :- (i) Supply and fix 4 Pole MCCB ,100 Amp 50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =04 Nos(c) Supply and fix R Y B Phase LED based indicator lamp sets comprising of three colours complete all as specified and directed =01set(d). Ammeter 0 - 400 Amps, Digital display, flush mounted 3 phase 4 wire with slector switch including CTs of required capacity =01 Set(e) Voltmeter 0 - 600 Volts, Digital display, flush mounted 3 phase 4 wire with slector switch - 01 set.(f) complete Internal wiring of suitable size of copper wire. |
| 37 | Material & Labour for supply,installing,testing & commissioning of factory made LT panel outdoor type for LT distribution switch gear and control gear,floor mounted ,cubical type modular compartment, dust and vermin proof with neoprene gasket fabricated out of CRCA sheet of thick ness not less than 3.15 mm (CPRI Approved) complete with aluminium bus bar chamber & aluminium Bus bar of four wire system 415 volt with heat shrinkable insulator sleeve suitable for 630 A for phases and for neutral having openable front and rear shutters with suitable locking arrangement epoxy powder spray painted with one coat primercomplete including PCC 1:2:4 type B-1 using 20 mm graded stone agregate foundation raised base angle iron size 50mm x50mmx6mm thick 60cm up and 60cm ground level complete all as specified and directed by the Engr in Charge of the following components:- Contractor should arrange factory visit to Engr-in-charge at own arrangement for LT Pannel manufacturing. |
| 38 | (a) 4 pole change over with handle 200 Amp 50 hz 415 volts Capacity 35 KA-01 Nos(b) INCOMING :- (i) Supply and fix 4 Pole MCCB ,630 Amp 50 Hz 415 V, With 250 Amp change over with handle Thermal based Release type Capacity 35 KA complete all as specified and directed =01 Nos(c) OUTGOING :- (i) Supply and fix 4 Pole MCCB ,200 Amp 50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =04 Nos(c) OUTGOING :- (i) Supply and fix 4 Pole MCCB ,100 Amp 50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =01 Nos(d) Supply and fix R Y B Phase LED based indicator lamp sets comprising of three colours complete all as specified and directed =01set(e). Ammeter 0 - 400 Amps, Digital display, flush mounted 3 phase 4 wire with slector switch including CTs of required capacity =01 Set(f) Voltmeter 0 - 600 Volts, Digital display, flush mounted 3 phase 4 wire with slector switch - 01 set.(g) Supply and fix time switches 415 V three Phase of 20 Amp rating with contactor fitted inside steel enclosure. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender