Tender For General-Budget Work 2025-26 (Substitution) Providing 20Mm Bit Chipping Carpet Work At Millumpady Ettikavala @ Ch 0/000 To 3/600 In Mariyapuram Grama Panchayat-Providing 20Mm Bit Chipping Carpet Work At Millumpady Ettikavala @ Ch 0/000 To 3
Tender Value
42.36 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
4 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Budget Work 2025-26 (Substitution) Providing 20Mm Bit Chipping Carpet Work At Millumpady Ettikavala @ Ch 0/000 To 3/600 In Mariyapuram Grama Panchayat-Providing 20Mm Bit Chipping Carpet Work At Millumpady Ettikavala @ Ch 0/000 To 3/600 In Mariyapuram Grama Panchayat-General Civil Work-1
BOQ
| Sl. No. | Item Description |
| 1 | DETAILED ESTIMATE |
| 2 | 2.3.2.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Mechanical Means |
| 3 | 10.3:Maintenance of Earth Shoulder (stripping excess soil) from the shoulder surface to achieve the approved level and compacting with plate compactor |
| 4 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 5 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 6 | 3.15:Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres by Mechanical Means |
| 7 | 4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method |
| 8 | 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 9 | 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. |
| 10 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 11 | OD282968/2025-2026:Mix seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of20 mm thickness composed of 11.2 mm to 0.9 mm Type-A aggregate using penetration gradebitumen to required line, grade and level to serve as wearing course on previously preparedbase, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 KN staticroller and finishing to required level and grades as per Technical specification clause 509 ofMORD (Usage of bitumen is 22.00 kg /(10 m2) By Manual Means |
| 12 | 55.22:Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete. |
| 13 | 12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 14 | 12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> RCC Grade M20 - Using Concrete Mixer - (Without formwork) <br> |
| 15 | OD351829/2025-2026:Providing and Fixing of DLP board with 2 years of warranty non reflectorised sign made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting , 2mm thick /aluminium composit material sheeting 4mm thick with area not exceeding 0.9 sqm, with suitable back supporting with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NBconfirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cmbelow ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender