Tender For Height Raising At Loc. No. 134-135 Of 132 Kv North Lakhimpur-Majuli S/C Transmission Line Due To Low Ground Clearance
Tender Value
1.09 Crore
Estimated cost
Bid Submission
07 Oct 2026
9 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Majuli → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Height Raising At Loc. No. 134-135 Of 132 Kv North Lakhimpur-Majuli S/C Transmission Line Due To Low Ground Clearance
BOQ
| Sl. No. | Item Description |
| 1 | Tower superstructures |
| 2 | Galvanised Lafice steel tower superstructures (approx. HT steel 30%, MS: 70%) including hangers, gussets, strain plates, step bolts etc. along with nuts and bolts of tower types :1No: (D+6), 1No: (D+9)Total 2 Nos of towers |
| 3 | Partially galvanized stub angle with cleat for 2 Nos of towers along with nuts and bolts of tower as mentioned in SI.No. 1.1 |
| 4 | Power Conductor |
| 5 | ACSR Panther conductor |
| 6 | Disc insulators strings complete with all hardware fittings and associated clamps |
| 7 | 10 disc Single Tension insulators String 90 KN each disc with all hardware fittings and associated clamps |
| 8 | 9 disc single suspension insulator string 90 KN with all hardware fittings and associated clamps |
| 9 | Stock Bridge type vibration damper |
| 10 | Jointing sleeves for ACSR panther |
| 11 | Preformed armour Rod |
| 12 | Tower and transmission line accessories |
| 13 | Supply of Danger plate |
| 14 | Supply of phase plate |
| 15 | Supply of Number plate |
| 16 | Supply of Bird Guard |
| 17 | Supply of Anti Climbing Device |
| 18 | Tower superstructures |
| 19 | Galvanised Lafice steel tower superstructures (approx. HT steel 30%, MS: 70%) including hangers, gussets, strain plates, step bolts etc. along with nuts and bolts of tower types :1No: (D+6), 1No: (D+9)Total 2 Nos of towers |
| 20 | Partially galvanized stub angle with cleat for 2 Nos of towers along with nuts and bolts of tower as mentioned in SI.No. 1.1 |
| 21 | Power Conductor |
| 22 | ACSR Panther conductor |
| 23 | Disc insulators strings complete with all hardware fittings and associated clamps |
| 24 | 10 disc Single Tension insulators String 90 KN each disc with all hardware fittings and associated clamps |
| 25 | 9 disc single suspension insulator string 90 KN with all hardware fittings and associated clamps |
| 26 | Stock Bridge type vibration damper |
| 27 | Jointing sleeves for ACSR panther |
| 28 | Preformed armour Rod |
| 29 | Tower and transmission line accessories |
| 30 | Supply of Danger plate |
| 31 | Supply of phase plate |
| 32 | Supply of Number plate |
| 33 | Supply of Bird Guard |
| 34 | Supply of Anti Climbing Device |
| 35 | Survey |
| 36 | Detail & Check survey as per specification |
| 37 | Construction of (D+6) F.S Foundation |
| 38 | Construction of tower foundation of RCC (M20) and PCC (1:3:6) including excavation and backfilling in all types of soil (Dry, Wet, PS & FS), shuttering, shoring, Dewatering, Manual or Mechanised carriage of material to the site, providing all construction materials such as stone chips, sand, cement, all tools and plants, cost of labour and any incidental items deemed necessary for completion of the foundation work as per drawing and specification as directed by AEGCL (for all types of foundation). |
| 39 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (from Primary producer TATA, Jindal, SAIL, Shyam etc.). |
| 40 | Construction of Well/Caisson Foundation |
| 41 | Mobilisation (including preparation of work space, approach road, dewatering, arrangement of electricity, jungle clearing, earth filling and making all arangements for construction and supply of all materials & labour for temporary island/working platform to facilitate the construction of Caisson foundation including working platform for storage of construction of materials such as stone chips, sand, cement, steel reinforcement bar, vibrator machine, mixture machine, tools and plants, cables, lights for all foundation marterials keeping and mixing |
| 42 | Construction of cast in situ RCC caisson of inner dia 1200mm and outer dia 1400 mm for tower foundation as per the approved drawing and technical specification, sinking of the caisson through all strata of soil (Clay, sand, silt, gravel, roc, etc) upto depth of approved drawing below Ground level and raised from GL including cost of providing and laying of concrete of M-20 grade for caisson, filling inside caisson, plugging, removal of soil from inside the caisson for sinking, dewatering, steel shuttering/formwork, carriage of material to work site, site preparation including preparation of island, protection of work site and adjacent properties, supply of all construction materials shuttering, shoring etc. complete as per drawing & specification. (Reinforcement shall be paid extra) |
| 43 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (from Primary producer TATA, Jindal, SAIL, Shyam etc.). |
| 44 | Providing and laying in position cement concrete of M20 grade of reinforced cement concrete for Tie Beam including Shuttering in prop 1:1.5:3, coarse sand (zone-III) derived from natural sources and graded stone aggregate of 20 mm nominal size obtaind from crushed stone boulder. |
| 45 | Setting of stubs (sets of four) including transportation and distribution of stubs and accessories from store to site excluding cost of excavation, concreting and back filing |
| 46 | Super structure erection Including transportation of structure materials to the sites, total 2(two) Nos of towers1No: (D+6), 1No: (D+9) |
| 47 | Stringing of power conductors including transportation from stores and distribution of conductors and accessories to site and laying, tensioning, clamping, jointing, jumpering and hoisting of insulators complete including cost of required fittings and accessories not specifically mentioned elsewhere per route KM of line. |
| 48 | Earthing of towers with 3 metre long 25 mm dia GI pipe including cost of all materials, such as GI pipes, GI bolts & nuts and washers, salt, cock etc as per specification. |
| 49 | Painting of towers with bituminous paints of approved quality upto 3 metres from ground level including the cost of paints. |
| 50 | Erection of Danger plates |
| 51 | Erection of Phase plates |
| 52 | Erection of Number plates |
| 53 | Erection of Anti Climbing Device |
| 54 | Erection of bird guard |
| 55 | Welding of all nut & bolts upto the bottom cross arm level including all charges of transportation, materials etc. |
| 56 | Arrangement of ERS, erection and dismantling of ERS tower and all necessary associated works involving ERS required for completion of the work (Considering involvement of ERS for 4 times for uniterrupted supply of power) (Two ERS tower required for each Transminission Line Tower) |
| 57 | Supply of OPGW 24-Fibres, Clamps & fittings, junction box with splice kit etc. |
| 58 | OPGW 24-Fibres overhead cable |
| 59 | OPGW double tension pass through assembly |
| 60 | OPGW double tension assembly for splicing location c/w Pre-formed armour rods and tower bond clamps |
| 61 | OPGW Suspension Assembly(Suspension Pass through) with Chain link c/w Pre-formed armour rods and tower bond clamps |
| 62 | OPGW vibration damper c/w pre-formed armour rods |
| 63 | Down Lead Clamp |
| 64 | OPGW optical splice kit (48 Fibre) including junction box |
| 65 | Installation & Restringing of OPGW |
| 66 | Opening and lowering of optical fibre ground wire along with accessories from the portion of the line to be dismantled and transportation to the AEGCL store (Route AEGCL) |
| 67 | Stringing of optical ground wire including transportation and distribution of ground wire and accessories to site and laying, stringing, tensioning, clamping, jointing, complete including all fittings and accessories not specifically mentioned elsewhere per route KM of line |
| 68 | Opening and lowering of conductor from the portion of the line to be dismantled ( 3 Conductors) and transportation to the AEGCL's store |
| 69 | Dismantling of tower without damaging the tower members and transportation to the AEGCL's store with proper stacking Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender