Tender For Setting Up Of P.A.O. Cell On 6Th Floor & Ground Floor At Chandigarh Secretariat Building, Sector-9-D, Chandigarh (Providing Access Control System).
Tender Value
7.73 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
6 days left
EMD
15470
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Setting Up Of P.A.O. Cell On 6Th Floor & Ground Floor At Chandigarh Secretariat Building, Sector-9-D, Chandigarh (Providing Access Control System).
BOQ
| Sl. No. | Item Description |
| 1 | Face Recognition Access Controller System Supply, Installation, testing and Commissioning of Face and Card based Time-Attendance and Access Control Door Controller as per the detailed specifications (Please refer DNIT for complete specification of item no.1) |
| 2 | DSR Item no. 41.6Electromagnetic locks Supplying, Installation, Testing and Commissioning of Electromagnetic locks (fail safe type) for following type of Doors suitable for operation on 12 V DC having holding force 600 lbs for Single Leaf Door and 1200lbs for Double leaf door with suitable feedback i/c connection complete etc. as required. |
| 3 | Single leaf door |
| 4 | Double leaf door (Each leaf 600lbs & Total 1200 lbs) |
| 5 | DSR Item no. 41.7Exit Push Button Supplying, Installation, Testing and Commissioning of Heavy Duty SS Finish Exit Push Button for releasing access doors with all necessary installation accessories i/c connection complete etc. as required. |
| 6 | DSR Item no. 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. |
| 7 | 6U Rack |
| 8 | DSR Item no. 39.1Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. (Please refer DNIT for complete specification of item no.5) |
| 9 | 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. |
| 10 | DSR Item no. 39.21 Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required. |
| 11 | 6 Port LIU |
| 12 | DSR Item no. 39.6.1Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required. |
| 13 | 1G SFP Single Mode/Multi Mode |
| 14 | DSR item no. 39.22Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to LC Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset ≤50 µm, Fiber Height ± 100 nm, End-face radius of Curvature 7mm < R <25mm, Repeatability ≤ 0.2 db, Working ambient Temperature – 5 0C to +50 0C, Storage Temperature – 10 0C to +50 0C, Length -- 2meter, Type -- LC-LC Duplex etc complete as required. |
| 15 | DSR Item no. 39.20Supplying and drawing following core Multi mode Fiber Optic Cable having corrugated steel armoring, leser optimize 50/125 µm with HDPE jacket, LSZH (Low smoke Zero Halogen), Tight-buffered or loose tube, maximum attenuation: < 3.5 dB/km at 850 nm, < 1.5 dB/km at 1300 nm, bandwidth > 2000 MHz-km at 850 nm, > 500 MHz-km at 1300 nm compliance and certifications: ISO/IEC 11801 Ed. 2.2, ANSI/TIA-568 C.3, ITU-T G.651.1 RoHS compliant. Multi Mode Fiber shall be Central-loose tube filled with Thixotropic jelly, duly following Standards: (Please refer DNIT for complete specification of item no.9) |
| 16 | 6 Core Multi Mode Optical Fiber Cable |
| 17 | DSR Item no. 39.17.1Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required. |
| 18 | 1 Run of cable |
| 19 | DSR Item no. 1.21Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 20 | 25 mm |
| 21 | Supplying and laying of 3 core 1.5 sq. mm copper conductor PVC insulated power cable to be laid in existing pipe or on surface with the help of suitable size of clamps. Make: KEI/Havells/ RR Kabel/Finolex/ Polycab only. |
| 22 | Supply and erection of anodized aluminium ‘U’-shaped bracket for frameless glass door suitable for 10–12 mm thick glass, size 16 cm × 8 cm × 8 cm, complete with necessary fixing accessories, compatible with electromagnetic lock and complete in all respects as per site requirements to the entire satisfaction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender