Tender For Renovation And Modernization Of Kitchen At Basundhara Bhawan Under Basundhara Area.
Tender Value
30.72 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
3 days left
EMD
38500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Modernization Of Kitchen At Basundhara Bhawan Under Basundhara Area.
BOQ
| Sl. No. | Item Description |
| 1 | Civil part:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar. |
| 3 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50metres lead :Of area 3 sq. metres and below |
| 4 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 5 | 20 mm cement plaster of mix:1:6 (1 cement: 6 coarse sand) |
| 6 | 12 mm cement plaster of mix: 1:6(1 cement: 6 fine sand) |
| 7 | Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 9 | Providing and laying in position excluding cement concrete of level: specified grade the cost ofcentering and shuttering - All work up to plinth1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 10 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 11 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 12 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 13 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 16 | Providing and laying Glazed Vitrified Tiles in floor work, of thickness not less than 9 mm, having water absorption less than 0.08% and conforming to IS:13630, of approved make such as SOMANY DURAGRES, JOHNSON or equivalent, as approved by the Engineer-in-Charge, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. as per direction of the Engineer-in-Charge and approved sample. The tiles shall be cut using zero-chipping diamond cutter only. Laying shall be executed with notch trowel, plier, wedge, clips of required thickness, leveling system, and rubber mallet to ensure accurate placement without damage. GVT tile full polished endless/carving finish, of size of Tile: 2400 mm x 1200 mm. |
| 17 | Providing and fixing 1st quality Ultracharge Vitrified wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of SOMANY or other approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(800x1600mm wall tiles) |
| 18 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 800x800 mm |
| 19 | Providing and fixing 15 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of WIDE/MEDIUM/THICK GRAIN (Area of slab over 0.50 sqm) |
| 20 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 21 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc.,including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) soliddoor/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mmtolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profiledimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm. |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 24 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre). |
| 25 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds.Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m). |
| 26 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds.Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zannak) powder coated handles. Using R1 series with frame (33mm & above) x (35mm & above) & sash /mullion (33mm & above) x (50 mm & above). (Height upto 0.90 metre). |
| 27 | Providing and fixing 4 mm thick Aluminium Composite Panel (ACP) with both side laminated decorative finish (such as graphite stone, copper stone, oak, pine, vintage, wooden, marble, granite, etc.) having glossy type PVDF coated surface, UV resistant, durable, high strength and resistant to impact, wear & tear, water, termite and scratches, in panelling to aluminium doors, windows shutters, partitions or SS frames, fixed with C.P. brass / stainless steel screws, complete as per architectural drawings and as directed by the Engineer-in-Charge. |
| 28 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 29 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes. |
| 31 | Kitchen Items:Providing, fabricating, supplying and placing Stainless Steel Work Table of overall size 600 mm × 1200 mm × 800 mm (24\\" × 48\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising 16 SWG stainless steel top with machine-finished folded edges and suitable under stiffeners, complete with two Nos. undershelves fabricated from 16 SWG SS sheet, supported on SS 304 square pipe frame of minimum 38 mm × 38 mm × 16 SWG section. The table shall be provided with adjustable nylon levelling feet, all joints TIG welded, ground smooth and finished in uniform matte (satin) finish, complete with cutting, bending, welding, grinding, polishing, transportation, placing in position and all labour, materials, fittings and incidental charges required for complete installation as directed by the Engineer-in-Charge. |
| 32 | Providing, fabricating, supplying, installing and commissioning Stainless Steel Three Burner Indian High Burner Cooking Range of overall size 600 mm × 1800 mm × 800 mm (24\\" × 72\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising three Nos. heavy-duty high-pressure cast iron Indian burners complete with individual pilot lamps, 150 mm (6\\") high rear splash guard (space bar), 16 SWG stainless steel top with suitable reinforcement, one bottom shelf fabricated from SS 304 stainless steel sheet, removable stainless steel spillage tray with stainless steel strip handle, G-12 gas manifold with individual burner control valves and nozzles, supported on heavy-duty SS 304 square pipe frame with adjustable nylon levelling feet. The complete body shall be fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, all joints TIG welded, ground smooth and polished, complete with gas inlet connection, burner assembly, all necessary fittings, accessories, transportation, installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 33 | Providing, fabricating, supplying and placing Stainless Steel Work Table with Sink of overall size 600 mm × 1200 mm × 800 mm (24\\" × 48\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising 16 SWG stainless steel work top with one integrally welded sink of size 450 mm × 450 mm × 300 mm (18\\" × 18\\" × 12\\"), two undershelves fabricated from 21 SWG SS 304 stainless steel sheet, supported on heavy-duty SS 304 square pipe frame fabricated from 16 SWG section, complete body fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, provided with adjustable nylon levelling feet, complete with stainless steel waste coupling, drain outlet, suitable under stiffeners, all joints TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, placing in position and all necessary fittings, fixtures, labour, materials and accessories required for complete installation, complete in all respects as directed by the Engineer-in-Charge. |
| 34 | Providing, fabricating, supplying, installing and commissioning Stainless Steel Two Burner Indian High Burner Cooking Range of overall size 600 mm × 1200 mm × 800 mm (24\\" × 48\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising two Nos. heavy-duty high-pressure cast iron Indian burners complete with individual pilot lamps, 150 mm (6\\") high rear splash guard (space bar), 16 SWG stainless steel top with suitable reinforcement, one bottom shelf fabricated from SS 304 stainless steel sheet, removable stainless steel spillage tray with stainless steel strip handle, G-12 gas manifold with individual burner control valves and nozzles, supported on heavy-duty SS 304 square pipe frame, complete body fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, provided with adjustable nylon levelling feet, all joints TIG welded, ground smooth and polished, complete with gas inlet connection, burner assembly, all necessary fittings, accessories, transportation, installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 35 | Providing, fabricating, supplying and placing Stainless Steel Work Table of overall size 600 mm × 600 mm × 800 mm (24\\" × 24\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising 16 SWG stainless steel work top with suitable under stiffeners, two undershelves fabricated from SS 304 stainless steel sheet, supported on heavy-duty SS 304 square pipe frame fabricated from 16 SWG section, complete body fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, provided with adjustable nylon levelling feet, all joints TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, placing in position and all necessary fittings, fixtures, labour, materials and accessories required for complete installation, complete in all respects as directed by the Engineer-in-Charge. |
| 36 | Providing, fabricating, supplying, installing and commissioning Stainless Steel Chapati/Roti Bhatti of overall size 600 mm × 900 mm × 800 mm (24\\" × 36\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising one heavy-duty high-pressure RV burner complete with control valve, 12 mm thick heavy-duty mild steel hot plate duly machined and perforated where required for efficient combustion and heat distribution, one bottom shelf fabricated from 21 SWG SS 304 stainless steel sheet, supported on heavy-duty SS 304 square pipe frame, complete body fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, provided with adjustable nylon levelling feet, complete with gas inlet connection, burner assembly, all necessary valves, fittings and accessories. All joints shall be TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 37 | Providing, fabricating, supplying and placing Stainless Steel Work Table of overall size 600 mm × 900 mm × 800 mm (24\\" × 36\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising 16 SWG stainless steel work top with suitable under stiffeners, two undershelves fabricated from SS 304 stainless steel sheet, supported on heavy-duty SS 304 square pipe frame fabricated from 16 SWG section, complete body fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, provided with adjustable nylon levelling feet, all joints TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, placing in position and all necessary fittings, fixtures, labour, materials and accessories required for complete installation, complete in all respects as directed by the Engineer-in-Charge. |
| 38 | Providing, fabricating, supplying, installing and commissioning Stainless Steel Single Burner Indian High Burner Cooking Range of overall size 600 mm × 600 mm × 800 mm (24\\" × 24\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising one No. heavy-duty high-pressure cast iron Indian burner complete with pilot lamp, 150 mm (6\\") high rear splash guard, 16 SWG stainless steel top with suitable reinforcement, one bottom shelf fabricated from SS 304 stainless steel sheet, removable stainless steel spillage tray with stainless steel strip handle, G-12 gas manifold with burner control valve and nozzle, supported on heavy-duty SS 304 square pipe frame, complete body fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, provided with adjustable nylon levelling feet. All joints shall be TIG welded, ground smooth and polished, complete with gas inlet connection, burner assembly, all necessary valves, fittings and accessories, including cutting, bending, welding, grinding, polishing, transportation, installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 39 | Providing, fabricating, supplying and placing Stainless Steel Pick-up Counter/Preparation Table with Upper Shelves of overall size 600 mm × 1500 mm × 800 mm (24\\" × 60\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising 16 SWG stainless steel work top with suitable under stiffeners, two undershelves fabricated from 21 SWG SS 304 stainless steel sheet, three sides enclosed with SS 304 stainless steel sheet, upper shelves fabricated from SS 304 stainless steel sheet with suitable supports, supported on heavy-duty SS 304 square pipe frame fabricated from 16 SWG section, complete body fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, provided with adjustable nylon levelling feet. All joints shall be TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, placing in position and all necessary fittings, fixtures, labour, materials and accessories required for complete installation, complete in all respects as directed by the Engineer-in-Charge. |
| 40 | Providing, supplying, installing, testing and commissioning Commercial Dough Kneading Machine of 15 kg capacity, electrically operated, of overall size 900 mm × 900 mm × 480 mm, complete with SS 304 food-grade stainless steel bowl and all food-contact parts, heavy-duty kneading mechanism with geared transmission, suitable capacity TEFC induction motor, safety guard, control switch, rigid frame with adjustable levelling feet, complete with all necessary electrical components, wiring, accessories, transportation, installation, testing and commissioning, suitable for use in the Guest House Kitchen, complete in all respects as directed by the Engineer-in-Charge. |
| 41 | Providing, fabricating, supplying and placing Stainless Steel Pot Rack with Plate Shelves of overall size 500 mm × 1100 mm × 1800 mm (20\\" × 44\\" × 72\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising five Nos. tray-type perforated shelves fabricated from 21 SWG SS 304 stainless steel sheet with uniformly punched perforations for proper drainage and ventilation, shelves provided with 150 mm (6\\") side upstands, supported on heavy-duty SS 304 square pipe frame fabricated from 16 SWG section. The complete body shall be fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, provided with adjustable nylon levelling feet. All joints shall be TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, placing in position and all necessary fittings, fixtures, labour, materials and accessories required for complete installation, complete in all respects as directed by the Engineer-in-Charge. |
| 42 | Providing, supplying, installing, testing and commissioning Vertical Freezer of 1000 litres capacity, four-door type, of overall size 710 mm × 1065 mm × 1930 mm (28\\" × 42\\" × 76\\"), fabricated with complete SS 304 food-grade stainless steel body (Jindal or equivalent approved make), comprising four insulated self-closing doors with magnetic gaskets, heavy-duty refrigeration system with Kirloskar, Emerson or equivalent approved make hermetically sealed compressor mounted on the rear/opposite side of the cabinet, high-density PUF insulation, digital temperature controller with temperature range of 0°C to +5°C, adjustable shelves, heavy-duty castor wheels/adjustable nylon levelling feet, complete with CFC-free refrigerant, condenser, evaporator, automatic door closing arrangement, internal illumination, electrical controls, power cord, all necessary accessories, transportation, installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 43 | Providing, fabricating, supplying and placing Stainless Steel Three Sink Unit of overall size 600 mm × 1800 mm × 800 mm (24\\" × 72\\" × 32\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising three integrally welded sinks, each of size 450 mm × 450 mm × 300 mm (18\\" × 18\\" × 12\\"), complete with 150 mm (6\\") high rear splash guard, heavy-duty SS 304 square pipe frame, perforated drain board/work surface where required, one bottom shelf fabricated from SS 304 stainless steel sheet, complete body fabricated from SS 304 food-grade stainless steel with uniform matte (satin) finish, provided with adjustable nylon levelling feet. The unit shall be complete with stainless steel waste couplings, drain outlets, necessary plumbing connections, suitable under stiffeners, all joints TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, placing in position and all necessary fittings, fixtures, labour, materials and accessories required for complete installation, complete in all respects as directed by the Engineer-in-Charge. |
| 44 | Providing, fabricating, supplying, installing, testing and commissioning Stainless Steel Exhaust Hood (Triangular Type) for Tandoor of overall size 600 mm × 650 mm × 900 mm (24\\" × 26\\" × 36\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising hood body fabricated from 18 SWG SS 304 stainless steel sheet with suitable stiffeners, removable SS 304 baffle grease filters fabricated from 16 SWG stainless steel sheet, complete with stainless steel oil/grease collection drain system comprising grease collection channel and removable drain tray, suitable outlet collar/flange for connection to exhaust duct, designed for efficient collection and extraction of smoke, fumes, vapours and hot gases generated from tandoor operation, complete with necessary hanging brackets, supports, fasteners and all accessories. The complete hood shall have a uniform matte (satin) finish, all joints TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 45 | Providing, fabricating, supplying, installing, testing and commissioning Stainless Steel Exhaust Hood (Triangular Type) for Tandoor of overall size 600 mm × 650 mm × 1200 mm (24\\" × 26\\" × 48\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising hood body fabricated from 18 SWG SS 304 stainless steel sheet with suitable stiffeners, removable SS 304 baffle grease filters fabricated from 16 SWG stainless steel sheet, complete with stainless steel oil/grease collection drain system comprising grease collection channel and removable drain tray, suitable outlet collar/flange for connection to exhaust duct, designed for efficient collection and extraction of smoke, fumes, vapours and hot gases generated from tandoor operation, complete with necessary hanging brackets, supports, fasteners and all accessories. The complete hood shall have a uniform matte (satin) finish, all joints TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 46 | Providing, fabricating, supplying, installing, testing and commissioning Stainless Steel Exhaust Hood (Triangular Type) for Tandoor of overall size 600 mm × 650 mm × 1800 mm (24\\" × 26\\" × 72\\"), fabricated from SS 304 food-grade stainless steel (Jindal or equivalent approved make), comprising hood body fabricated from 18 SWG SS 304 stainless steel sheet with suitable stiffeners, removable SS 304 baffle grease filters fabricated from 16 SWG stainless steel sheet, complete with stainless steel oil/grease collection drain system comprising grease collection channel and removable grease tray, suitable outlet collar/flange for connection to exhaust duct, specially designed for efficient collection and extraction of smoke, fumes, vapours and hot gases generated from tandoor operation (high fume recovery), complete with necessary supporting brackets, hanging arrangement, fasteners and accessories. The complete hood shall have a uniform matte (satin) finish, all joints TIG welded, ground smooth and polished, including cutting, bending, welding, grinding, polishing, transportation, installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 47 | Providing, fabricating, supplying, installing, testing and commissioning of complete Kitchen Exhaust System comprising G.I. ducting fabricated from 0.70 mm thick G.I. sheet (229 Grade, Tata/UTTAM or equivalent approved make) having a total developed duct surface area of 76.20 Sqm (820 Sq.ft), complete with flanges, cleats, angle supports, stiffeners, hanging arrangements, nuts, bolts, sealant and all accessories. The system shall include one No. 800 mm (32\\") dia axial flow fan, 1400 RPM, complete with 3-phase TEFC induction motor (Crompton or equivalent approved make), one No. 600 mm (24\\") dia inline silencer with 900 RPM fan complete with Crompton or equivalent approved make motor, one No. 600 mm (24\\") dia exhaust fan, 1400 RPM (Vansel or equivalent approved make), complete with four Nos. hood connections, flexible canvas connections, vibration isolators, all necessary electrical connections from local isolator to equipment, testing, balancing and commissioning of the complete exhaust system, including transportation, labour, tools, tackles and all incidental works, complete in all respects as directed by the Engineer-in-Charge. |
| 48 | Providing, supplying, installing, testing and commissioning of complete LPG Gas Bank Station including MS gas pipeline of 1\\" dia (approx. 50 Rft length), complete 5-cylinder gas manifold system with necessary valves, regulators, connectors, fittings, supports, clamps, joints and all accessories. The work shall include laying and fixing of MS gas pipeline, gas fitting works, pressure testing, leakage testing, commissioning and handing over of the complete gas bank system in safe and operational condition as per applicable safety standards and specifications. |
| 49 | Carriage of garbage or earth mixed other wastes by tractor trolley including manual loading and unloading and disposing at garbage dumps or at any other specified location as per the direction of Engineer-In-Charge. (iii) For lead of 3 km |
| 50 | E&M Part:Wiring for light point /fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 51 | Wiring for group controlled (looped) light point /fan point/ exhaust fan point/ call bell point (without independent switch etc.)with1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in recessed PVC conduit, and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group B |
| 52 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 53 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 54 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 55 | Supplying and fixing 3pin, 5A ceiling rose on the existing junction box/wooden block including connections etc. as required |
| 56 | Supplying and fixing suitable size GI box with modular plate and cover in front on in recess, including providing and fixing 6 pin 5/6 & 15/16A modular socket outlet and15/16 A modular switch, connections etc. as required. |
| 57 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 12 Module (200 mm X 150 mm) |
| 58 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch |
| 59 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet |
| 60 | Supplying and fixing two module stepped type BLDC fan regulator on theexisting modular plate switch box including connections but excluding modular plate etc. as required. |
| 61 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 62 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30cm) with 1.5sq.mm FRLS PVC insulated, copper conductor,single core cable etc. as required. |
| 63 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earthbar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door |
| 64 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earthbar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way, Double door |
| 65 | Supplying and fixing 5A to 32A rating, 240/415V, 10kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole |
| 66 | Supplying and fixing 5A to 32A rating, 240/415V, 10kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Double pole |
| 67 | Supplying and fixing 5A to 32A rating, 240/415V, 10kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Triple pole and neutral |
| 68 | Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25A |
| 69 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having as ensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A |
| 70 | Supplying and fixing DP sheet steel enclosure on surface / recess along with 25/32A 240V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 71 | Supplying and fixing TP sheet steel enclosure on surface / recess along with 16/25/ 32A 415V \\"C\\" curve TP MCB complete with connections, testing and commissioning etc. as required |
| 72 | Installation ,Testing,Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 73 | Supply of 45 Watt Pendant Lights for Ceiling of Kitchen with 2 meter down rod including 45 watt lamp. |
| 74 | Supply surface ceiling light circular LED 15/18watt, 230V |
| 75 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required |
| 76 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender