Tender For Maintenance & Repair Work On Ch Aknagar To Khayerpur Road Section On Nh-08 From Km 242.500 To Km 261.610 (Existing Road) At Various Sections At The Risk And Cost Of Epc Contractor In The State Of Tripura In The Fy 2026-27 On Item Rate Basi
Tender Overview
Project Description
Tender for Maintenance & Repair Work On Ch Aknagar To Khayerpur Road Section On Nh-08 From Km 242.500 To Km 261.610 (Existing Road) At Various Sections At The Risk And Cost Of Epc Contractor In The State Of Tripura In The Fy 2026-27 On Item Rate Basis & Work Order Basis.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Oct-2026 | Corrigendum I | Date | 15-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Water Bound Macadam Sub-Base / Base using Jhama Brick Aggregate 1) WBM Grading- 2 Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller/ vibratory roller in stages to proper grade and camber, applying and brooming and binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density 'Grading-2' as per MoRT&H Technical Specification Clause 404. (A) By Manual Means |
| 2 | Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.6 kg/sqm using mechanical means as per MoRT&H Technical Specification Clause 502. |
| 3 | Tack Coat Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous / granular surface cleaned with Hydraulic broom as per MoRT&H Technical Specification Clause 503. |
| 4 | Dense Graded Bituminous Macadam Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects. B. Grading II (For layer thickness 50 - 75 mm) i. With Viscosity Graded Bitumen of VG-30 |
| 5 | Bituminous Concrete B. Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. B. Grading II (For layer thickness 30 - 40 mm) i. With Viscosity Graded Bitumen of VG-30 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender