Tender For Construction of Rain Shelter At Panjot .
Tender Value
9.75 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
4 days left
EMD
20000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Rain Shelter At Panjot .
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within all lead as per direction of Engineer - in- charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within all lead as per direction of Engineer-in- charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Per Square meter on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3graded stone aggregate 20 mm nominal size) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up tofloor five level, excluding cost of centering, shuttering,finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3graded stone aggregate 20 mm nominalsize) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns,etc. for mass concrete including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form foColumns, Pillars, Piers, Abutments, Posts and Struts including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inpositionand binding all complete above plinth level Thermo Mechanically Treatedbarsofgrade Fe-500D or more including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 13 | Half brick masonry with common burnt clay F.P.S. (none above plinth level up to floor V level cement mortar 1:4 (1 cement :4 coarsesand) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 15 | Providing ridges or hips 60 cm over all in plain G.I.sheet with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. Limpet and bitumen washers copmlete:- |
| 16 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Per Square meter including grouting the joints with white cement and matching pigments size 600x600 including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 18 | 15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 Per Square meter over and including priming coat of exterior primer applied @ 2.20 kg/10 Per Square meter) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 20 | Applying Birla white wall care putty (two coats ) over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. |
| 21 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 Per Square meter over an under coat of primer applied @ 0.80 ltr/ 10 Per Square meter of approved brand and manufacture including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 22 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 23 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 24 | Providing and fixing aluminium work for doors, windows ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 25 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 26 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-cWith float glass panes of 5.00 mm thickness weight not less than 12.50 kg / Per Square meter including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 27 | Providing & fixing fly proof Stainless steel (grade 304(three hundred four)) wire gauze of 0.5 mm(zero point five millimetre) dia wire and 1.4 mm (one point four millimetre) aperture on both sides complete to windows, clerestory windows & doors with aluminium snap beading and nuts & bolts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 28 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. (Only weight of grill to be measured for payment). |
| 29 | Providing and fixing bright finishedbrass harddrawn hooks and eyes : 100 mm including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 30 | Providing and fixing 200x10mm (two hundred into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 31 | Providing and fixing 100x10mm (one hundred fifty into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 32 | Providing and fixing 110mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 33 | Providing and fixing 150mm (one hundred fifty millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. . |
| 34 | Providing and fixing 300x16mm(three hundred into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 35 | Providing and fixing rolling shutters of approved make made of 80mm x 1.25mm M.S laths interlocked toghter through their entire length and joined together at the end locks mounted on specially designed pipe shaftwith all accesories as required as per the direction of Engineer-In-Charge. (shutters having width below 3.50 mtr) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 36 | Providing and fixing ball bearing for rolling shutters and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 37 | Providing form work with steel plates 3.15mm(three point one five millimetre) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work in: |
| 38 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like :- Floor etc. upto 200mm in thickness including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 39 | Vertical surfaces such as walls (any thicknes) partitions and the like including attached pillasters buttresses, plinth and string courses and the like including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 40 | Edges of slabs and break in floors and walls :- Under 20cm wide including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 41 | Providing and laying cement concrete 1:4:8 (1 cement :4 sand: 8 graded stone aggregates 40mm nominal size) and curing complete excludig cost of form work in:- foundation and plinth including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 42 | Foundations and plinth |
| 43 | Providing and laying cement concrete work 1:2.:4(1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforce cement concrete including carriage of materials in all leads and lifts including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 44 | Walls (any thickness but not less than 0.10 metre thickness) including attached pillasters, buttresses, plinth and string courses, etc. from top of foundation upto all heights and floors including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 45 | Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 46 | Providing mild steel/Tor steel reinforcement including cost of binding wire for R.C.C. work including bending, binding and placing in position complete upto all floor level heights including carriage of material in all leads and lifts including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 47 | Second class half brick work using common burnt clay building bricks in plinth levels in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 48 | BrickworkwithcommonburntclayF.P.S. (nonmodular) bricksof classdesignation7.5 in foundationandplinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 49 | Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts :-40 mm thick including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 50 | 20mm thick cement plaster in single coat on Rough side of concrete stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and rounded angles notexceeding 80mm in girth and finished even in and smooth in cement mortar 1:3 (1 cement : 3 sand) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 51 | Providing and fixing PVC of supreme make or S.C.I./C.I. spun fitting & socket waste soil & ventilating pipes ( Lead caulked joint to be measured and paid for seperately) 110 mm dia. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 52 | Providing and fixing of PVC of supreme make or S.C.I./C.I. spun fitting & accessories single equal branches of required degree plain 100 mm dia With oval access door insertion rubber washer 3 mm thick, bolts and nuts complete including carriage of materials within all leads and lifts :-100mm nominal size :- |
| 53 | Providing and fixing PVC or cast iron cowl including carriage of materials within all leads and lifts :-100mm nominal diametre including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 54 | Providing lead caulked joints to sand cast / cast iron (spun) iron pipes fittings including testing of joints :-100mm nominal size diametre including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 55 | Supplying C.I. cover light duty rectangular 455x610mm with frame weight 38 kg ( Single seat ) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 56 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing C P brass bib tap with capstan head 15mm dia including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing C P brass stop cock 15mm dia including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 59 | providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6mm thick A C sheet or plywood sheet and fixed to wooden plug withC P screws and washers including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 60 | Providing and fixing 600x120mm glass shelf fixed with C P brass bracket and gaurg rail comlete fixed to wooden plug withC P screws including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 61 | Providinf and fixing liqued soap container with C P brass lid and brackets fixed to wooden plug with C P brass screws ( plastic container) including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 62 | Providing and fixing C P Brass waste for wash or sink 32mm dia including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 63 | Providing and fixing P V C connection with brass union 300 /450mm length 15 mmdia including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 64 | Providing and fixing 100 mm sand cast iron grating for gully ,or nahni trap including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 65 | Providing and fixing C P Brass towelrail complete with C P brass brackets fixed to wooden plugs with C P Brass screws 750x 20mm including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 66 | Providing and fixing vitreous China wash basin with single hole for piller tap with C. I or M S bracket painted white including cutting holes and making good the same but excluding fitting including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 67 | Providing and fixing C P brass piller tap with capstan head 15mm dia including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | Providing and fixing vitreous China pedestal for wash basin complrte recessed at the back for the reception of pipes and fitting including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 69 | Providing and fixing chromium plated brass soap dish wiyh C P brass brackets fixed to wooden cleats with CP Brass screws including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 70 | Providing and to wall cilling and floor galvanised mild steel tube midium grade ) tube fitting and clamp includuding making good the wall ,cilling & floor 15mm dia including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 71 | Providing and fixing C P Brass waste for wash or sink 32mm dia including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 72 | Providing and fixing of M S union for wash or sink 32mm bore including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 73 | Providing and fixing C P brass bib tap with capstan head 15mm dia including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 74 | Providing & fixing white vitreous china flat back or wall corner front urinal basin lipped front urinal basin of 430x260x350 mm & and 340x430 265mm size respectvily with automatic flushing cistern with fittings RS or CI brackets standred size galvanised steel flush pipe and spreaders with brass union and GI clamp complete including painting of cistern and fitting cutting and making good the wall floor where requred ( one urinal basin with automatic fluhing cistern including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 75 | Providing and fixing PVC conection with brass union 300/450mm length 15 mm nominal bore including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 76 | Providing and fixing division plate for urinal 600x300mmVitreous China including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender