Tender For Upgradation And Improvement To Hygienic Condition Of Kitchen,Bath And Toilet Of Married Accommodation C-11 To C-18 And C -20 (36 Qtrs) At Drdo Township, Kanchanbagh, Hyderabad.
Tender Value
46 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
13 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation And Improvement To Hygienic Condition Of Kitchen,Bath And Toilet Of Married Accommodation C-11 To C-18 And C -20 (36 Qtrs) At Drdo Township, Kanchanbagh, Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster up to the height 7.0 M includng disposal of rubbish to the dumping ground within 5KM out side MOD land lead |
| 2 | Demolishing brick work in cement mortar manually / by mechanical means includng stacking of serviceable materials and disposal of unserviceable materials withinwithin 5KM out side of MOD land leads as per direction of Engr -in- Charge |
| 3 | Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor 2nd floor level in all shapes and sizes in cement mortar 1:4 complete |
| 4 | Providing Half brick masonry with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in super structure above plinth level upto floor 2nd floor level in cement mortar 1:4 |
| 5 | 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and finished the surface fair and even without using extra cement complete . |
| 6 | Distempring Two or more coats on new work over a coat wall primer with Ist quality acrylic distemper , having VOC ( Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture of required shade and colour incluidngapplying 1mm thick wall care putty complete as per manufacturer's specification |
| 7 | Distempering on old work ( wall/ ceiling) ( two or more coats) with 1st quality acrylic distember ( Ready mix ) having VOC content less than 50 grams/ litre of approved brand over a coat of water thinnable cement primer and manufacturer to give an even shade |
| 8 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge.(a) Internal Work- Exposed on wall |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm nominal dia , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc |
| 10 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 25 mm nominal dia , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. Exposed on wall ,This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.and Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge and |
| 11 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 12 | Providing and laying rectified Glazed Ceramic non skid floor tiles of size 300x300mm/400x400mm or any size, more (7-8 mm thick to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments, |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles of size 300x300mm/450x300mm conforming to IS: 15622 (7-8mm thick to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade. |
| 14 | Providing and laying vitrified tiles size 600 x 600mm in floor in different size ( 9-10mm thick to be specified by the manufacturer ) with water absorption less than 0.08 % and conforming to IS : 15622 of approved brand & manufacturer, in all colours and shade , laid on 20mm thick screed bed of cement mortar 1:4/chemical jointing with grey cement slurry @ 3.3 kg/Sqm incluidng grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, hacking out the surface, levelling system and rubber mallet for placing the tiles gently and easily. |
| 15 | Providing and laying vitrified tiles in different sizes ( size of tiles 600 x 600 mm) (9-10mm thick to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours & shade , in skirting, riser of steps , over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg / Sqm including grouting the joint with white cement & matching pigments, Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge etc., complete |
| 16 | Providing and laying Polished Granite stone flooring kitchen platform in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 17 | Providing and fixing in repairs C.P. brass bib cock of approved quality conforming to IS:8931, 15 mm nominal bore |
| 18 | Providing and fixing in repairs C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter |
| 19 | Providing and fixing in repairs C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 20 | Providing and fixing in repairs uplasticised PVC connection 15mm nominal bore x 60 cm length pipe with PTMT nuts, collar and bush of approved and colour |
| 21 | Providing and fixing in repairs 75mm dia sand cast iron S&S trap of self cleansing design with screwed down or hinged grating with or without vent arm complete incluindg cost of cutting and making good the walls and floors |
| 22 | Resecuring the shutters of any description of area exc 1sqm and n exc 2sqm each after carrying out necessary repair complete all as directed. |
| 23 | Providing and fixing in repais wash basin with CI brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :- (i) White vitreous china flat back wash basin size 550 x 400mm with single 15mm CP brass pillar tap |
| 24 | S&F in repairs Stainless steel plate rack of size 910x 910x 300mm complete all as specified and directed. |
| 25 | Providing and fixing in repairs PTMT towel rail omplete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour 600mm long Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender