Tender For Special Repair To Bldg No P-1 (Offrs Md Accn) In Escort Line Under Age B/R-I Of Ge (Kh) Yol
Tender Value
46.85 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
8 days left
EMD
93700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-1 (Offrs Md Accn) In Escort Line Under Age B/R-I Of Ge (Kh) Yol
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Sep-2026 | Corrigendum1 | BOQ | 10-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any guage, thickness including Nainital or similar pattern roof covering, all as specified. |
| 2 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, all as specified. |
| 3 | Dismantling boarding, any description, fixed in any position with nails ,complete all as specified and as directed. |
| 4 | Demolition of stone slabs/tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etc. including removal of debris to a distance exc 1.5 km but n.exc 2 Km,complete all as specified and as directed. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and as directed. |
| 6 | Demolition of stones or brick masonry or block walling, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc.complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and as directed. |
| 7 | Demolition of cement concrete reinforced of any description in any position complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and as directed. |
| 8 | Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 9 | Taking up or down steel tubing 20mm dia and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 10 | Taking up or down steel tubing 25 or 32mm dia and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 11 | Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and as directed. |
| 12 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and as directed. |
| 13 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified & directed. |
| 14 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, complete all as specified. |
| 15 | Taking down shutters of any description but exc. 1 Sqm and n exc. 2 Sqm each complete all as specified and as directed. |
| 16 | Refixing the shutter in same positionof descreption exc 1sqm but n exc 2sqm each complete all as specified |
| 17 | Dismantling PVC/CI drain pipes, 75 to 110 mm dia, fixed to walls, laid in floors or in trenches or in any position including all fittings complete all as specified and directed. |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete as specified. |
| 19 | M&L for Non-skid/Mat finish coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) or chemical adhvesive required to fixed with subbase including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 20 | M & L Virified Ceramic tiles Light shade 10 mm thick glossy/mat finish double charged heavy duty (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 21 | M & L Virified Ceramic tiles Light shade 10 mm thick glossy/mat finish double charged heavy duty (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm,as in skirting, dado etc . set and jointed in neat cement slurry and including 10mm thick rendering in cement mortar (1:4) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 22 | M&L for Glazed ceramic, premium quality, coloured/ printed tiles 350mm x 250mm/ 450mm x 350mm/1200mm x 600mm x 7 to 8 mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry or with chemical adhesive having 3mm horizontal spacing between them filled with neat and freshly prepared epoxy filled in the gooves cleaned or pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. |
| 23 | M& L 20 mm thick Black Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 24 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 25 | M&L for Machine cut kota stone slab flooring 18-20 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 (1 cement : 6 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase complete, all as specified. Note: Kota stone provided should be as single piece as in riser and treads or in any vertical surface. |
| 26 | M&L for 25mm thick cement concrete M-15 (Nominal mix) type B-0 (using 12.5mm graded crushed stone agg ) as in flooring, finished even & rough to receive floor finishes complete all as specified and directed. |
| 27 | M&:L for Plain cement concrete M-10, nominal mix, type C-2, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved). |
| 28 | M&L for Plain cement concrete M-15, nominal mix, B-0 using 12.5mm graded mechanically crushed stone aggregate as, in lintels upto 1.5 metre clear span, steps, seismic and other similar bends, coping,benching in roof, bands plates for serving hold fasts, filling in mild steel frames etc. and the like including weathering slighting rounded or chamfered angles and throating complete all as specified. Note:- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately. |
| 29 | M&L 75mm PCC, M-10 (Nominal Mix) type C-2 (using 40mm graded crushed stone aggregates) as in sub base flooring finished even and fair without using extra cement, complete all as specified and directed . |
| 30 | M & L for chequered cement concrete tiles of size 20cmx20cmx 25mm thick with grey pigment cement and pigments, set jointed & pointed in neat cement slurry mixed with pigment to match the shade of the slab in floors laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified. |
| 31 | Providing and laying 60mm thick factory made chamfered edge cement concrete paverblock of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method usingPU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed. |
| 32 | Reinforced cement concrete, 1:2:4 (Nominal mix), type B-1, (using 20mm graded mechanically crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, all as specified. |
| 33 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 34 | M&L for Form work to soffits of suspended slab such as roof slabs, floor slab landing, Facias, louvres, parapets and raiings etc and similar works not exceeding 200mm thick (horizontal or sloppy) for fair finished surfaces of concrete flat ,complete all as specified and as directed.. |
| 35 | M&L for Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand) all as specified & directed. |
| 36 | M&L for Brick work as in half brick walls with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) all as specified & directed. |
| 37 | M&L Walling of random rubble,brought up to course, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed. |
| 38 | All as per Item No. 37.00 above but except stone. |
| 39 | M&L for Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer), mixed with water proofing compound @ 3% by weight of cement on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified. Note:- WPC shall be measeared and paid sepreately as supply only |
| 40 | Supply only integral water proofing compound, complete all as specified. |
| 41 | M&L for Rendering cement plaster 15 mm thick in cement mortar 1:6 (1 cement : 6 coarse sand), on other than fair faces of brick wall or on stone masonry surfaces, trowelled to even and smooth finish without using extra cement complete all as specified. |
| 42 | M&L for Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, all as specified. |
| 43 | M&L for Preparation of new plastered or unplastered surfaces of walls with wall care putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper complete all as specified and directed. |
| 44 | M&L for Preparation of old or previously treated plastered surfaces of walls and applying two coats of oil bound distemper over wall care putty of 2 mm thickness over plastered surface to prepare the surface even and smooth including complete removal of existing treatment complete all as specified and directed. |
| 45 | M&L for Preparation of new plastered or unplastered surfaces with wall care putty of 1mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of obd on ceiling complete all as specified and directed. |
| 46 | M&L for Preparation of old or previously treated plastered or unplastered surfaces including complete removal of existing treatment and applying one coat of oil bound distemper on ceiling complete all as specified and directed. |
| 47 | Material and Labour for exterior painting work new plaster surface making good/smooth the surface with wall putty with silicon additives applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties (Apex Ultima Suprema). complete all as sepcified and directed. |
| 48 | Material and Labour for exterior painting work including complete removal of existing treatment and rubbish material till top surface of existing plaster and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall care putty with silicon additives and sanding thes surface for removal of loose particles and applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties (Apex Ultima Suprema). complete all as sepcified and directed. |
| 49 | Material and Labour for waterproofing of exterior walls, include complete removal of existing plaster including raking out joints and applying two coats of acrylic polymer modified high performance coating (Smartcare Ultra Block 2k). The treatment shall be done from ground level and providing 15mm thick cement plaster in CM 1:4 finished even and smooth. |
| 50 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshade, shelves, lintles etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exceeding 10 cms girth all as specified and directed. |
| 51 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 52 | S&F 16mm Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 53 | S&F 16mm Brass Elbow for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 54 | S&F 16mm Brass Tee for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 55 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 56 | S&F 20mm Union for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 57 | S&F Brass Elbow reducer (3/4 X ½) for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 58 | S&F for steel tubes, 25 mm bore, galvanised, \\" medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified |
| 59 | Fixing only G I tubing medium grade of 25mm bore with all new fittings fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed |
| 60 | S&F for steel tubes, 32 mm bore, galvanised, \\" medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed |
| 61 | S& F in Repair Sink with drain board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 405mm x 355mm x 178 mm, all as specified. |
| 62 | S&F for angle valve/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified. |
| 63 | S&F for Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down high pressure, screwed for iron pipe or for brass ferrule fixed in repairs, all as specified. . |
| 64 | M&L Brass CP mixer for mixing hot & cold water in kitcehn sink screwed down for iron pipe and fixed complete all as specified and directed. |
| 65 | M&L Bath and shower CP mixer 3 in 1 for mixing hot & cold water in bathroom with provision for overhead shower area with Long bend pipe on upper side with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed. |
| 66 | Vitreous China wash down water closet (pedestal pattern) with flushing cistern (single piece), coloured of size 800 mm X 375 mm X 650 of Jaguar/700 x 370 x 745 mm of Prayag/650 x 360 x 750mm of HINDWARE/720 x 370 x 760 mm of CERA any other size as directed and including S traps, trap distance 180 mm connection to drain or outgoing pipe, , flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and CP jet/health faucet including PVC connection, fixed complete including demolition of old unservicable WC and provision of PCC M-15, type B-I, using 20mm graded crushed stone aggregate all as specified. Make: Cat Part No. ARS-WHT-39751P or ARS-WHT-39201 of Jaquar or Cat Part ARTISAN 4390 of \\"PRAYAG\\" or Cat. No.: 20122 (S-22)/Cat. No.: 20127 (P-18) of \\"HINDWARE\\" or Cat. No. A1014112 of \\"CERA\\" equivalent makes mentioned in Appx 'C' Note: Size, shape and cat part of approved makes will be approved by GE. |
| 67 | S&F for Soap dish, chromium plated, fixed to plugs with chromium plated, brass screws, fixed in repairs all as specified. |
| 68 | S&F for Sheet glass shelf assembly, 55 cms long consisting of 5.5 mm thick sheet glass shelf 12cms wide with chromium plated bracket guard (rectangular/ oval/ curved and railing 60 cms long, selected quality as approved by GE, fixed in repairs, all as specified and directed. |
| 69 | S&F for Chromium plated brass shower rose, fancy type, 200 x 200 mm size with shower arm, chromium plated, 200mm long with bend of 45° or 300 mm long straight with flange suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs as approved, complete all as specified.Make:Cat. No.:Cat. No.: F160103 of \\"HINDWARE\\" or Cat No. F7010507AB of \\"CERA\\" or Cat No. BOS-42 of \\"PRAYAG\\" or Cat No. TQT-526N of \\"ESSCO\\" or equivalent makes mentioned in Appx 'C' as directed by Engr-in-Charge. |
| 70 | S&F for Brass chromium plated tubular towel rail 20 mm dia, \\"D\\" type, 60 cms long between flanges fixed with and including chromium plated brass brackets, brass screws complete all as specified |
| 71 | S&F for Wash hand basins, Vitreous China (Oval shape) of size and make as directed by Engr-in-charge , coloured, fixed in granite counter by making suitable holes, new brackets with and including cutting for and pinning on ends of brackets, fixed, 450 mm long PVC connections 15mm size with PTMT coupling nuts at both ends, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, waste pipe of polythylene of low or high density or PVC of 32mm dia including, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed, complete all as specified. fixed in repair complete as all specified and directed. Make: CNS-WHT-705 of \\"JAGUAR' or Cat Part No. '4793' NIALL of \\"PRAYAG\\" or Cat. No.: 10045 of \\"HINDWARE\\" or Cat. No. S2030104 of \\"CERA\\" or equivalent makes mentioned in Appx 'C' Note: Design, shape and cat part will be approved by GE. |
| 72 | M&L Pillar cock with long extension body with provision of hot & cold water lever operated having long braided hoses pipe with PVC Connection of length 450mm screwed down for iron pipe and fixed complete all as specified and directed. Make:Cat. No.: Cat. No.: F520002 of \\"HINDWARE' or F1016102 of \\"CERA\\" or Cat No. 8751 of \\"PRAYAG\\" or Cat No. STE107005B of \\"ESSCO\\" or equivalent makes mentioned in Appx 'C' as directed by Engr-in-Charge. |
| 73 | S&F 5.5 mm thick polished glass bevelled looking mirror of selected quality and size not less 1.05 sqm as approved by Engr-in-charge with 4, mounted on walls with spacers with CP brass screws and cup washers fixed in repairs, all as specified. |
| 74 | S& F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia outlet pipe in cement concrete type B-1 (1:2:4) , all as specified and directed. |
| 75 | M&LPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 76 | S&F for 32 mm dia HDPE pipes of pressure rating 6 kgf/cm2(Waste pipe connect to Sink/WHB for removal of waste) all as specified. |
| 77 | S&F for PVC connection 15mm size with PTMT nuts at boths end 600mm long and fixed, all as specified. |
| 78 | S&F for PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints laid in trenches or in floors of bore 110 mm, in repairs complete, all as specified. |
| 79 | S&F PVC (SWR) pipes , type B, single socketed in any length with rubber ring joints fixed to walls of bore 110 mm, in repairs complete, all as specified. |
| 80 | S&F PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints fixed to walls of bore 75 mm, in repairs complete, all as specified. |
| 81 | S&F for PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore provided with oval access door, fixed in repairs all as specified. |
| 82 | S&F for PVC (SWR) bend any radius with or without access door, 110mm bore, fixed in repairs complete all as specified. |
| 83 | S&F for PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, fixed in repairs all as specified. |
| 84 | S&F for PVC (SWR) bend any radius with or without access door, 75mm bore, fixed in repairs complete all as specified. |
| 85 | S&F for 110 mm PVC (SWR) vent cowl complete, all as specified. |
| 86 | S&F for Rotational moulded polyethylene water storage tank 1000 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with Brass PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including taking down of old tank, all as specified. |
| 87 | S&F for Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, all as specified and directed. |
| 88 | S&F for Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, drip and straight flashing(length and girth as fixed), fixed with self tapping screws all as specified |
| 89 | Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to FE 410-W (Gde E-250) quality A ,complete all as specified and as directed. |
| 90 | S&F false ceiling of Non asbestos(Designer) 4 mm fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including Galvanise iron powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The frame work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. |
| 91 | Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:-(i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window.(ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf.(iii) MS tower bolt 150mm long - 2 No per leaf(iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf.(v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf.(vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf.(vii) Flat iron fillets of size 20X3 mm for fixing wire gauge.(viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07.Make : As per Appendix 'C'.Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day. |
| 92 | S&F for Pressed steel frames for doors of size 105 mm X 60 X 1.25 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed including one shop coat of red oxide zinc chrome primer and filling frame with PCC M-15, type B-0 using 12.5 mm graded crushed stone aggregate, all as specified and directed. |
| 93 | S&F for Pressed steel frames for doors of size 125 mm X 60 X 1.25 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed including one shop coat of red oxide zinc chrome primer and filling frame with PCC M-15, type B-0 using 12.5 mm graded crushed stone aggregate, all as specified and directed. |
| 94 | M&L for PCC 1:3:6, Type C0 (using 20mm graded mechanically crushed stone aggregate) for filling in pressed steel frame./holdfast of any size ,complete all as specified and as directed. |
| 95 | S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side and one face covered with decorative face veneer with lipping/ frame to match: supplied and fitted to chowkats, all as specified and directed. |
| 96 | S/F 35 mm thick 2nd class hard wood rail and style plain framed,factory made panelled shutter (one panel) without interlocking rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 97 | S&F 35 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 98 | M&L WPC(Wood Polymer Composit) designer Double Prelam Door Frame(Chowkhat) of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured y an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be maid from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheet'C' shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cemen adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long 'L' brackets of 19 x 19 mm M.S sq, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm M.S sq Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. co mplete as per manufacture's specification & direction of engineer-in charge. |
| 99 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative and designed type flush door shutter of size 30mm thick comprising of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm(5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel Laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per direction of Engineer-in-charge, manufacture's specification and drawing. |
| 100 | S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks of galvanised wire staple fixed with stainless steel wire staples all as specified and directed. |
| 101 | S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 102 | S&F for 3mm thick figured glass, pin head type and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 103 | M&L 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified. |
| 104 | M&L for Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, all as specified. |
| 105 | M&L for Applying two coats of synthetic enamel paint on old wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, all as specified. |
| 106 | M&L for Painting two coats of synthetic enamelled paint over a coat of red oxide primer on new steel or iron surfaces of any description exceeding 10cm width/ girth including preparation of surfaces all as specified and directed. |
| 107 | M&L for preparation of old steel or iron surfaces of any description with one coat of synthetic enamelled paint exceeding 10cm width/ girth including preparation of surfaces over a coat of red oxide primer all as specified and directed. |
| 108 | S&F for Butt hinges, medium weight, cold rolled, mild steel 100mm complete all as specified and directed. |
| 109 | S&F for Aluminium anodised, barrel tower bolts of size 200mm extruded section and fixed all as specified & directed. |
| 110 | S&F for Aluminum alloy handle, cast type anodised of size 150 mm complete all as specified and directed. |
| 111 | S&F for Aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm long, all as specified and directed. |
| 112 | S&F for Mild steel, 300mm, ordinary rat tail, rod pattern springs including roller and roller plate complete fixed to chowkhats, all as specified. |
| 113 | Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. and also applying one coat of anti corrision paint to visible reinforcement if any. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm and M&L for 20mm thick cement rendering in two layers of 10mm each (top/final layer shall be rendered after final setting of under layer) in CM 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs etc complete all as specified and directed. |
| 114 | Renovation of Kitchen and Supply & Installation of Modular Kitchen complete all as specified below and as directed by Engr-in-Charge :- Kitchen Cabinet Bottom Unit * :- Providing and fixing of machine crafted box type cabinet bottom unit 560mm depth using 19mm HDHMR board with 0.6mm laminate both sides. The shutters will also be machine crafted with the same HDHMR, with 0.6mm inside with factory laminated while on the out side it will be provided with 0.8mm laminate or 1mm laminate of glossy finish and a machined edge band of 2mm. The hinges will be auto loaded hinges of approved make , which is of IS marked. The shelf is to be adjustable with two slots provided at 300mm spacing so as to accommodate the shelf. The plywood should be of thickness 19mm HDHMR with 0.6mm laminate on top and bottom with machine cut edge band 0.5mm thick. Kitchen Accessories with soft closures :- (a) Cutlery basket 430mmx510mmx100mm (b) Cup & Soucer 430mmx510mmx100mm (c) Plate (Thali) 430mmx510mmx150mm (d) Plain 430mmx510mmx150mm (e) Plain 430mmx510mmx200mm (f) Degergent holder 430mmx510mmx200mm (g) Oil pullout 160mmx510mmx585mm (h) Telescopic drawer channels (j) Dustbin hoder |
| 115 | Renovation of Kitchen and Supply & Installation of Modular Kitchen complete all as specified below and as directed by Engr-in-Charge :- Kitchen Over head wall Unit* :- Providing and fixing of machine crafted box type over head unit 325mmmm depth using 19mm HDHMR board with 0.6mm laminated both sides. The shutters will also be machine crafted with the same HDHMR Board , with 0.6mm inside laminate while on the out side it will be provided with 0.8mm laminate or 1mm laminate of glossy finish and a machined edge band of 2mm. The hinges will be auto loaded hinges of approved make , which is of IS marked. The shelf is to be adjustable with two slots provided at 300mm spacing so as to accommodate the shelf. The plywood should be of thickness 19mm HDHMR board with 0.6mm laminate on top and bottom with machine cut edge band 0.5mm thick. Note :- *All measurement are to be maesured as LengthxHeight . However , the depth of the boxes are to be as per the specifications described above. Also, all the kitchen accesories are of make \\"KAFF/HETTICH/GODREJ and approved bhy Garrison Engineer. This rate includes the cost of dismatling timber framework and boarding in existing position. |
| 116 | S&F 100 mm Adjustable pivot leg made of stainless steel/PVC ISI certified for holding kitchen bottom cabinet well supported over as specified and directed. |
| 117 | S&F 25 mm dia mild steel power coated , fancy type curtain rod including curtain brackets fancy type brackets with rounded fancy type end knob, with antique finish or coloured suitable for holding 25 mm dia single curtain rod complete all as specified. complete all as specified |
| 118 | S&F 2nd class hardwood Plain, solid, straight, cupboard chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints ,complete all as specified and as directed.. |
| 119 | M&L 12 mm Plywood Grade BWR type BB fixed with screws to timber frame/on walls to receive decorative laminate/mica over it as specified and directed. |
| 120 | S&F 100 mm size Aluminium alloy fancy handles, fabricated type, anodised, decorative type, fixed to shutter ,complete all as specified and as directed. |
| 121 | M&L for Pre cast RCC 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate as in cover slab for soakage well / manhole and similar works supported on walls set in cement mortar 1:6 ,complete all as specified and as directed. |
| 122 | M&L for plain cement concrete 1:3:6, type C1 using 20mm graded mechanically crushed stone aggregate as in surface channels and drains with proper finished surface including form work complete all as specified. |
| 123 | Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed. |
| 124 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 125 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender