Tender For Provn Of B/R Complain Cell Near Bldg No P-1, Provn Of E/M Complain Cell Near Bldg No P-2, Provn Of Aluminium Partition, Tiling, Shelf, Washing Point And Roof Treatment In Bldg No 294(Or Dh), Provn Of Bdy Pillars For Demarcation Of Def Land
Tender Value
39.70 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
20 days left
EMD
79400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ri Bhoi → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of B/R Complain Cell Near Bldg No P-1, Provn Of E/M Complain Cell Near Bldg No P-2, Provn Of Aluminium Partition, Tiling, Shelf, Washing Point And Roof Treatment In Bldg No 294(Or Dh), Provn Of Bdy Pillars For Demarcation Of Def Land And Addn/Altn Of Toilet In Bldg No 293 At Umroi Mil Stn Under Ge Umroi
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 2 | Excavation in post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil and removing surplus soil to a distance not exceeding 50 m and making good surfaces complete all as specified and directed. |
| 3 | Excavation in trenches not exceeding 1.50 m wide and n exc. 1.5 m in depth; for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed. |
| 4 | M&L for PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 5 | M&L for precast cement concrete block masonry 1:3:6 type C1 (20 mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 6 | Material and labour for Pre-cast cement concrete block masonry Type B1 (1:2:4) (using 20mm graded aggregate) with solid blocks, n.exc. 10 cm in width and setting in cement mortar (1:4) complete all as specified and directed by Engr-in-charge. |
| 7 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil all as specified and directed. |
| 8 | Removing surplus excavated materials (soils) upto a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 9 | Material and labour for hard core with broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 10 | Material and labour for 75 mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 11 | M&L 25mm thick PCC 1:2:4 Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 12 | M&L for providing cement concrete type C2, 1:3:6 (40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed. |
| 13 | S&F steel work in tubular vertical post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 14 | S&F steel work in tubular trusses and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 15 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 16 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 17 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | M & L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces in two layers (10mm thick 1st layer + 5mm thick finishing layer) finished even and smooth with out using extra cement mixed with liquid water proofing compound (for 5mm thick finishing layer only) @ 2% by weight of cement or as per manufacturer's instruction including taking down existing plaster of any description complete all as specified and directed. Note: Liquid water proofing compound will be measured and paid separately |
| 19 | Supply only Liquid water proofing compound. |
| 20 | M&L for preparation of new plastered surfaces of wall surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer and 1 mm thick wall care putty including rubbing with emery paper to make the wall surfaces smooth and even complete all as specified and directed. |
| 21 | Material & Labour for preparation of new plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 22 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed . |
| 23 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for Frame and shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per directions of Engineer-in-charge. |
| 24 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. |
| 25 | Supply & Fixing sheet glass ordinary quality 5.50 mm thick glazing in square/ rectangle not exceeding 0.50 sqm each pane with aluminium beads fixed to aluminium frame/shutter etc. complete all as specified and as directed. |
| 26 | Supply & Fixing sheet glass ordinary quality 4.8 mm thick glazing in square/ rectangle not exceeding 0.50 sqm each pane with aluminium beads fixed to aluminium frame/shutter etc, complete all as specified and as directed. |
| 27 | S&F Dead bolt type lock with key for Aluminium door chromium coated plated made of brass iron of size 100mmx38mm all as specified and directed. |
| 28 | Material and labour for coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors over and including 15mm thick screed bed/bedding layer in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the floor tiles complete all as specified and directed. |
| 29 | Material and labour for non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm as in skirting over and including 10mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match match the floor tiles complete all as specified and directed |
| 30 | M&L for Providing and fixing false ceiling of designer tiles (High Pressure steam cured) of 4 mm thickness (as per IS : 14862) of Size 595 X 595 mm and any of the design (Cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 grams, both side inclusive and black painted groove on all T webs) consisting of Main T runner with suitably spaced joints to get required length and 15 X 32 mm made from 0.30 mm thick sheet 1200 mm long spaced between main \\"T\\" at 600 mm C/C to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x20x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc Main \\"T\\" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instruction/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200 mm C/C along main \\"T\\", bottom exposed width of 15 mm of all \\"T\\" sections of 4 mm dia GI wire shall be pre-Painted with polyester paint and black painted groove at centre of Size 4mm depth and 4.5 mm width at any heights complete all as specified and directed. |
| 31 | S&F MS Plates (plain or chequered) channels, Fe 410-W(Gde-E-250) Quality-A, square cut or notched (ordinary and counter sunk) forming holes, with riveted ,bolted or welded attachment complete all as specified and directed. |
| 32 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed. |
| 33 | M & L for Mild steel TMT bars 5mm dia. and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 34 | M&L for RCC( Nominal Mix) Type B-1(1:2:4)(using 20mm aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span ,complete all as specified and directed. |
| 35 | M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, rough finished, flat complete all as specified and directed. |
| 36 | S & F anodised aluminium frame, powder coated (minimum thickness 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 37 | S & F anodised aluminium powder coated (minimum thickness 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, lock, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed. |
| 38 | M & L for prelaminated particle board 18/19mm thick and fixed as in repair to cup board shutter and shelf, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works complete all as specified and directed. |
| 39 | M&L for RCC (Nominal Mix) Type B-1(1:2:4)(using 20mm aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 40 | M&L for formwork to soffits of suspended slabs such as roof slab, floor slabs, landing; and similar work not exc 200mm (horizontal or sloping) thick; rough finished surfaces of concrete flat complete all as specified and directed |
| 41 | Material and labour for coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors over and including 15mm thick screed bed/bedding layer in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the floor tiles complete all as specified and directed. |
| 42 | Material and labour for non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in skirting over and including 10mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match match the floor tiles complete all as specified and directed |
| 43 | Material and labour for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7mm/450 x 350 x 7 mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in cement mortar 1:4 complete all as specified and directed. |
| 44 | S&F wash hand basin, white flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 45 | M&L for Green Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including 15mm thick screed bed/bedding layer in cement mortar 1:4 complete all as specified and directed. |
| 46 | Supply & Fix 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including all fittings and fixed with clamp complete all as specified and directed. |
| 47 | Supply & Fix 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 48 | S&F for 110mm dia PVC (SWR) branch piece,single (single Y) equal or unequal with access door including scafolding all as specified and directed. |
| 49 | S & F 15mm bore dia stop valves, fancy type, chromium plated with long shank, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed. |
| 50 | S&F 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 51 | S&F Brass Chromium Plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 52 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and directed. |
| 53 | S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 54 | S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed.complete all as specified and directed. |
| 55 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, moulded on 6mm thick AC building board commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and as directed. |
| 56 | S&F PVC connection pipe of 15 mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 57 | Dismantling AC/CGI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets complete all as specified and directed. |
| 58 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 59 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 60 | M & L for M 25 (Design Mix) (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, post and struts complete all as specified and as directed. |
| 61 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns stanchions for rough finished surface complete all as specified and as directed. |
| 62 | M & L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high painted with flourescent paints complete all as specified and as directed. |
| 63 | Material & labour for preparation of new or previously untreated surfaces and painting with two coats of synthetic enamel paint over a coat of primer on brick, stone, concrete, asbestos cement or plastered surface of any description over 10 cm girth or width not otherwise described complete all as specified and directed. |
| 64 | Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 65 | Material and labour for 5 mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling/chajja finished even and smooth without using extra cement complete all as specified and directed. |
| 66 | Material and labour for applying three coats of white wash on ceiling including preparation of new or previously untreated surfaces complete all as specified and directed. |
| 67 | M&L for for complete removal of the existing treatment of old plastered surface of walls and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer complete all as specified and directed. |
| 68 | M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash on ceiling surfaces complete all as specified and directed. |
| 69 | S&F TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed. |
| 70 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 71 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 72 | Taking down eaves gutters, sewage lines and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swannecks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) including necessary scaffolding, any height complete all as specified and directed. |
| 73 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, including making good disturbed area/surfaces with cement concrete/cement mortar 1:2:4 etc complete all as specified and directed. |
| 74 | S&F in repairs 15mm dia bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 75 | S & F in repair 15mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 76 | S&F in repair wash hand basin, white flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 77 | Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removal to store and S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 78 | Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removal to store and S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 79 | S&F Full length mirror of selected quality glass of any size, moulded on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 80 | S F in repair Vitreous china floor mounted cascade commode with flushing cistern of size 690 x 360 x 790 mm including all necessary fittings etc complete in all as specified and directed. |
| 81 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 82 | Supply and fixed in repairs vitreous china squatting pan, Orissa pattern of size 580 mmx440mm white with P or S trap, front or back inlet and integral foot rest ( Excluding flushing cistern and flush pipe) including provision of cement concrete bedding (PCC 1:4:8, type D2) complete all as specified and directed. |
| 83 | Taking down chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 84 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 85 | Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick Moulded Prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face, and fixing in frame at site as per specification and drawings complete all as specified and directed. |
| 86 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 87 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. |
| 88 | S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 89 | S & F ceramic tabletop wash hand basin (White colour) of size 460mmx330mmx127mm, Complete all as specified and as directed |
| 90 | Supply and fixing aluminium anodised (powder coated) ventilator frame (section for frame 63.5 X 38.1X 1.20mm thick) with shutter(section for shutter 41 x 20 x1.2mm thick)(bottom half portion fixed and top half portion with louver) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick frosted glass to aluminium frame work and louver using rubber gasket and fixed with stainless steel wire cloth of 0.36 mm dia and average width of aperture 1.40 mm outside vent with staple and suitable wall angle of size 25.4 x 25.40 x 1.1mm thick and fillets with screws and washers etc including Deco Grill of Model / Design No. DG 104 and 6.3mm thick etc. complete all as specified and as directed. |
| 91 | M & L for point wiring for one light/fan point controlled by one, one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed to wall/ceiling with and including 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity wire (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed. |
| 92 | M&L for point wiring with 2.5 sqmm FRLSH PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable drawn in PVC casing and caping on surface wall, ceiling with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLSH) (multistanded) PVC insulated and unsheathed cable as earth wire to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed. |
| 93 | Supply and fixing switch piano flush type 240 Volts 5 Amps, SP, one way with white colour complete all as specifed and directed. |
| 94 | Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) with white colour complete all as specified and directed. |
| 95 | Supply and fixing ceiling rose surface 3Phase/PVC/Polycarbonate, isolated body complete all as specified and directed. |
| 96 | Supply and fix MCB SPN DB 4 way double door, IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed. |
| 97 | Supply & fixing ceiling fan regulator electronic, Deluxe, rotary, step type, 120/280 V complete all as specified and directed. |
| 98 | S&F in repairs MCB SPN 32 to 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed. |
| 99 | S&F MCB, SP 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed. |
| 100 | S&F LED batten fitting 1x 18/20 watts (4 ft, 100 lm/W) including tube rod, 230 Volts, bipin holders connector block etc. complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with flexible cable from ceiling rose to light fitting complete all as specified and directed. |
| 101 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified and directed. |
| 102 | S&F ceiling fan 1200 mm (minimum) sweep, BEE 5 star rated with BLDC technology, AC single phase 230 watt with fan regulator, suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose to ceiling fan complete all as specified and directed. |
| 103 | S&F wall fan with energy saving model 230 V, 450 mm (minimum) sweep complete all as specified and directed. |
| 104 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust, common salt all around earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with 6mm dia MS bars @ 75mm C/C both ways and provision of suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. including testing on completion complete all as specified and as directed . Note: The rate quoted is deemed to be inclusive of minimum 7.5 metre earthing wire. |
| 105 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation of pole and laying of UG cable and getting out in soft/loose soil complete all as specified and directed. |
| 106 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm completed all as specified and directed. |
| 107 | Supply & filling sand for cushioning to the under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable complete all as specified and directed.Note: Punned thickness shall be measured and paid under this item. |
| 108 | M&L for common burnt clay building bricks sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables, laid dry and flat complete all as specified and directed. |
| 109 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 110 | Supply and fixing or laying UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor,1100 Volts grade,cross section area 06 sqmm 2 core cable complete all as specified and directed. |
| 111 | Supply and fix in repair MCB SPN DB 8 way double door, IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed. Please Enable Macros to View BoQ information |
| 112 | Supply and fix in repair MCB SPN DB 8 way double door, IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender