Tender For Repair/ Replacement Of Roof Sheet, Rafter, Floor Tiles Plain Cement Concrete Wall Paneling Ceiling And Other Connected Work At 14 Fad And Certain Other Location In The Aor Of Age B/R I Under Ge Narangi
Tender Value
35 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
17 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Roof Sheet, Rafter, Floor Tiles Plain Cement Concrete Wall Paneling Ceiling And Other Connected Work At 14 Fad And Certain Other Location In The Aor Of Age B/R I Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, as in valley gutter, ridge of roof, wall and cladding etc complete all as specified and as directed |
| 2 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and as directed |
| 3 | Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified and as directed |
| 4 | Demolition of Stone slabs and tiles laid dry and dry or pointed of any description or thickness infloors, aprons etc complete all as specified and as directed |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 6 | Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the premises complete all as specified and directed. |
| 7 | Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 8 | Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 9 | Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar in any position complete all as specified and directed. |
| 10 | Demolition of brick work, built in cement mortar, including all quoins, arches, pillars including coping etc complete all as specified and as directed. |
| 11 | Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 12 | Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed. |
| 13 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 14 | Material and labour for pre cast RCC cover slab, type B-1, 1:2:4 (Using 20 mm graded crushed stone aggregate ) as in cover slab etc. and set in cement mortar 1:4 including necessary foRM work complete all as specified and as directed |
| 15 | Material and labour for RCC Nominal Mix Type A1 (1:1.5:3) (Using 20 mm graded crushed stone aggregate ) on slabs supported on walls , beams and columns in floors , roofs,landings,balconies, canopies deck slabs and in shelves and the likew complete all as specified and as directed |
| 16 | Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate ) in fdn filling and mass concrete complete all as specified and as directed |
| 17 | Material and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate ) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc , complete all as specified and as directed. |
| 18 | Supply only water proofing compound. |
| 19 | Material and labour for brick work with sub class \\"B\\" bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specifed and directed. |
| 20 | Material and labour for brick work with sub class \\"B\\" bricks, straight or curved on plan exc to any radius in half brick thick walls built in built in CM 1:4 complete all as specifed and directed |
| 21 | Material and labour for Granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platfoRMs and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 22 | Material and labour for Granite 20mm thick (of any type) work (table rubbed and polilshed)for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed. |
| 23 | Material and labour for form work on flat sides to soffits of suspended roof slabs not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete complete all as specified and as directed. |
| 24 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed |
| 25 | Supply and fix Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed |
| 26 | Supply and fix in repair solid PVC wall lining/panelling consisting of 5mm plain colour PVC sheet including solvent cement and fixing at site on PVC frame and necessary beading as directed complete all as specified |
| 27 | Supply and fix 5mm thick PVC sheet fillet 35 mm for wall panelling inclusive of fixing on wall to make PVC frame complete all as specified and directed |
| 28 | Supply and fix stainless steel butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed. |
| 29 | Supply and fix Aluminium alloy handles 150 mm long fabricated type complete all as specified & directed. |
| 30 | Supply and fix aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified & directed. |
| 31 | Supply and fix in repairs aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. (Make- Sandhu/Samrat) |
| 32 | Supply and fix in repair Aluminium Lock,4 Lever,100mm long fixed to Aluminum doors complete all as specified and directed Make Godrej/Link |
| 33 | Supply and fix in repair powder coated two track aluminium sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete including 4.00 mm thick tinted glass panes, rubber beading, locking system etc. complete all as specified and as directed. (Refer Jindal Cat M-2014 ) Aluminium sections : 'A' series (i) Shutter bottom & top :- 37.50 x 15 x 1.3 mm thick (20690)(ii) Shutter interlock :- 37.50 x 23 x 1.3 mm thick (20689)(iii) Shutter side (Handle) :- 37.50 x 23 x 1.3 mm thick (20689) (iv) Frame bottom :- 75 x 26 x 1 mm thick (20671) (v) Frame top and sides :- 75 x 26 x 1 mm thick (20672) |
| 34 | Supply and fix in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) or shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular Material and labour sections/ appropriate Z sections and other sections of approved make confoRMing to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed |
| 35 | Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed. |
| 36 | Material and labour for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed. |
| 37 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 38 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 39 | Supply and fix suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 32 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to foRM 600mm x 600 mm grid complete all as specified and directed. |
| 40 | Material and labour for 12 mm thick prelaminated particle board BWA type melamine finished (both side) for fixing the panel of the partition/door including necessary fittings, gusket, angle cleats, screw etc including taking down complete all as specified and directed. |
| 41 | Material and labour for heavy duty parking tiles size 300mm X 300 mm X 10 mm thick white cement and pigments of approved maked jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 15 mm thick in cement mortar (1:4) complete all as specified and directed. |
| 42 | Material and labour for 75 mm thick PCC 1:3:6, type C-2, using 40 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 43 | Material and labour for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in flooring, hardstanding complete all as specified and directed. |
| 44 | Material and labour for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation, floor etc complete all as specified and directed. |
| 45 | Material and labour for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed. |
| 46 | Material and labour for non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete of item all as directed. |
| 47 | Material and labour for non skid, ceramic “coloured” tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete of item all as directed. |
| 48 | Material and labour for non skid, Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.38 sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:3 complete all as specified and directed. |
| 49 | Material and labour Coloured/ Printed Glazed Ceramic Tiles 7mm thick not exc 0.15 Sqm in area in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and as directed. |
| 50 | Material and labour for 10mm thick rendering on other than fair faces of brick wall in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed. |
| 51 | Material and labour for rendering 15mm thick external in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement with using WPC @3% by the wt of cement. WPC shall be measured and paid seperately. |
| 52 | Material and labour for rendering 15mm thick external in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement complete all as specified and directed. |
| 53 | Material and labour for 5mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed. |
| 54 | Material and labour for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 55 | Material and labour for preparing of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed. |
| 56 | Material and labour for preparation of old distempered surface of wall including cornices etc. by washing, rubbing down,scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and stopping of distempered surfaces and applying one coat of acrylic distemper of approved shade on surface of wall complete all as specified and directed. |
| 57 | Material and labour for preparation of newly plastered surface of wall and applying a coat of alkali primer and two coats of acrylic distemper complete all as specified and directed |
| 58 | Material and labour for preparation of newly plastered surface of walls and applying two coat of acrylic exterior weather coat paint (Weather proof paint with quality of dust guard, anti algal and anti fungal paint with minimum 05 years perfoRMance warranty, Make: Berger Weathercoat Anti Dustt or equivalent of Asian paint or Nerolac) over a coat of approved primer over 1mm thick water proof putty of same manufacturer complete all as specified and directed. |
| 59 | Material and labour for complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down including applying a layer 1 mm wall care (putty) for making the surface even & smooth etc complete all as specified and directed |
| 60 | Material and labour for complete removal of existing treatment of wall and applying two coat of acrylic exterior weather coat paint (Weather proof paint with quality of dust guard, anti algal and anti fungal paint with minimum 05 years perfoRMance warranty, Make: Berger Weathercoat Anti Dustt or equivalent of Asian paint or Nerolac) over a coat of approved primer of same manufacturer complete all as specified and directed. |
| 61 | (i) Preparation of Surfaces – Material and labour for preparation of concrete surfaces and should be free from contumnation such as mortar, paint splashes, oil, grease etc. Excessive laitance should be removed by light mechanical grinding followed by vacuum cleaning.(i) Application Primer – It shall be ensured that the surface is bone dry during the application of primer bostik prime coagt/ HFP 120 of Asian paints ltd. The 2 part system shall be mixed mechanically using a slow HFP 120 of Assian paints speed heavy duty drilling machine (400 to 500 rpm) fitted with suitable peddle to active homogeneous mix. The mix material applied by brush allowed to dry completely. Total thickness of primer coat shall be 50 micron (dry thickness).(ii) Underlay Screed – When the primer coat reaches tack free state, the base, filler and hardener of the epoxy resin bostik epoxy underlay screed shall be mixed mechanically using a slow speed heavy duty drilling machine (400 to 500 rpm) fitted with a suitable paddle to achieve a smooth homogeneous mix and applied to the surface using trowel application as the layer screed at 2 mm thickness. Spike roller shall be applied to the surface for uniformness and allowed to dry. Total thickness of screed shall be 2 mm.(iii) Application of Epoxy PU Self Levelling Top Coat – When the above epoxy underlay screed gets dry, the base, hardener, color paste and filler of the Epoxy PU self levelling top coat shall be mixed mechanically as described above and applied over the underlay surface by trowel application and finished smooth and allowed to dry. Thickness of topping should be 1 mm and total thickness of system will be 3 mm. |
| 62 | Material and labour for 4mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed. |
| 63 | Material and labour for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed. |
| 64 | Material and labour for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed. |
| 65 | Supply and fix Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 66 | Supply and fix Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 67 | Supply and fix in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia PVC waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed. |
| 68 | Supply and fix in repair bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed. |
| 69 | Supply and fix in repair 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower aRM and wall flange suitable for fixing 15mm bore iron pipe all as specified and directed |
| 70 | Supply and fix in repair Bath Wall Mixer with 15mm bore (dia) Spout, Chromium Plated with long Bend Pipe for Over Head Shower including Flanges complete all as specified and as directed. |
| 71 | Supply and fix in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed. |
| 72 | Supply and fix in repair CP Stop valve/angle valve 15 mm bore, fancy type cromimum plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed. |
| 73 | Supply and fix in repair rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. |
| 74 | Supply and fix in repair rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. |
| 75 | Supply and fix Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms). |
| 76 | Supply and fix in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 77 | Supply and fix in repair PVC valve, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including brocket complete all as specified and directed |
| 78 | Supply and fix 110mm dia PVC (SWR) pipes, presure rate having 6 Kgf single socketed in any length with rubber ring joints and laid in trenches as in waste/soil pipe complete all as specified and as directed. |
| 79 | Supply and fix 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 80 | Supply and fix 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or floor complete all as specified and as directed. |
| 81 | Supply and fix PVC (SWR) bends with access door any radius, 75 mm bore complete. |
| 82 | Supply and fix PVC (SWR) bends with access door any radius, 110 mm bore complete. |
| 83 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 84 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 85 | Supply and fix in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed. |
| 86 | Supply and fix in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe all complete as directed |
| 87 | Supply and fix in repair Glass urinal partition (Frosted glass) superior quality approved colour, rectangular shape of size 450mm width, 900mm height, 10mm thick glass fixed with nuts, bolts and clip as per manufacturing instructions Complete all specified and as directed. Make :Jaquar urinal partition 1810-U(JSE-CHR-810UC450X or equivalent as approved. |
| 88 | Supply and fix in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed. |
| 89 | Supply and fix in repair plastic water closet seat cover, white, closed pattern with flat bottom & cover and aluminium anodised hinging device and fixed WC pan complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender