Tender For Repair Of Park Situated Near Cantonment General Hospital, Sadar Bazaar, New Cantt, Prayagraj
Tender Value
49.45 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
19 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Park Situated Near Cantonment General Hospital, Sadar Bazaar, New Cantt, Prayagraj
BOQ
| Sl. No. | Item Description |
| 1 | Suppy and Fixing of 40 mm thick fine dressed redstone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), including pointing with cement mortar 1:2 (1 cement: 2 stone dust) with an admixture of pigment to match the shade of stone as per standard/ specification as per direction of EIC. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources as per standard/ specification as per direction of EIC. |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement Mortar 1:6 (1 cement : 6 coarse sand) as per standard/ specification as per direction of EIC. |
| 4 | 12 mm cement plaster, mix 1:4 (1 cement : 4 Fine Sand) as per standard/ specification as per direction of EIC. |
| 5 | Digging holes in ordinary soil and refilling with excavated earth mixed with manure/sludge; hole 1.2 m dia and 1.2 m deep as per standard/ specification as per direction of EIC. |
| 6 | Digging holes in ordinary soil and refilling with excavated earth mixed with manure/sludge; hole 90 cm dia and 90 cm deep as per standard/ specification as per direction of EIC. |
| 7 | Digging holes in ordinary soil and refilling with excavated earth mixed with manure/sludge; hole 60 cm dia and 60 cm deep as per standard/ specification as per direction of EIC. |
| 8 | Digging holes in ordinary soil and refilling with excavated earth mixed with manure/sludge; hole 45 cm dia and 45 cm deep as per standard/ specification as per direction of EIC. |
| 9 | Providing and laying Selection No. 1 doob grass turf with 50–60 mm earth, including preparation, rolling, watering and maintenance until establishment as per standard/ specification as per direction of EIC. |
| 10 | Filling mixture of earth and sludge/manure in desired proportion in trenches, flooding with water and levelling as per standard/ specification as per direction of EIC. |
| 11 | Providing and stacking Azadirachta indica (Neem), height 120–130 cm as per standard/ specification as per direction of EIC. |
| 12 | Providing and stacking Ficus religiosa (Peepal), height 150–165 cm as per standard/ specification as per direction of EIC. |
| 13 | Providing and stacking Ficus bengalensis (Bargad), height 120–135 cm as per standard/ specification as per direction of EIC. |
| 14 | Providing and stacking Terminalia arjuna, height 150–165 cm as per standard/ specification as per direction of EIC. |
| 15 | Providing and stacking Delonix regia (Gulmohar), height 150–165 cm as per standard/ specification as per direction of EIC. |
| 16 | Providing and stacking Dalbergia sissoo (Seasam), height 120–135 cm as per standard/ specification as per direction of EIC. |
| 17 | Providing and stacking Plumeria rubra, height 120–150 cm with 3–4 branches and thick stem as per standard/ specification as per direction of EIC. |
| 18 | Providing and displaying Golden Bottle Brush Topiary, well developed, 115–180 cm ht in 40 cm cement pot as per standard/ specification as per direction of EIC. |
| 19 | Providing and stacking Bauhinia purpurea (Kachnar), height 150–165 cm as per standard/ specification as per direction of EIC. |
| 20 | Providing and stacking Bougainvillea, height 30–45 cm with 2–3 branches as per standard/ specification as per direction of EIC. |
| 21 | Providing and stacking Tecoma stans, height 90–105 cm, bushy as per standard/ specification as per direction of EIC. |
| 22 | Providing and displaying Marigold jaffri, well developed and in bloom, 60–75 cm ht as per standard/ specification as per direction of EIC. |
| 23 | Providing and displaying Petunia hybrid, well developed and in full bloom as per standard/ specification as per direction of EIC. |
| 24 | Providing and displaying Standard Rose (H.T. variety), 90 cm and above as per standard/ specification as per direction of EIC. |
| 25 | Providing and displaying Verbena in different colours, 30–45 cm ht, in bloom as per standard/ specification as per direction of EIC. |
| 26 | Providing and stacking Hamelia patens, height 90–105 cm, bushy as per standard/ specification as per direction of EIC. |
| 27 | Providing and stacking Tamarindus indica (Imli), height 120–150 cm as per standard/ specification as per direction of EIC. |
| 28 | Providing and stacking Eugenia jambolana (Jamun), height 150–165 cm as per standard/ specification as per direction of EIC. |
| 29 | Providing and stacking Cassia fistula (Amaltash), height 120–135 cm as per standard/ specification as per direction of EIC. |
| 30 | Providing and stacking Jasmine grandiflorum (Chameli), height 30–45 cm as per standard/ specification as per direction of EIC. |
| 31 | Providing and stacking Hibiscus variegated, height 60–75 cm with 8–10 branches as per standard/ specification as per direction of EIC. |
| 32 | Providing and stacking Plumeria acutifolia, height 120–135 cm with 2–3 branches as per standard/ specification as per direction of EIC. |
| 33 | Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per standard/ specification as per direction of EIC. |
| 34 | Cast Iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. Seat and back shall be made of 10 strips of M.S. pipes 63 mm x 25 mm of 14 gauge with one M.S. Flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. Spray painted with approved brand paint. Fixed by grouting with 1 :2:4 cement concrete (Minimum weight of each bench 105 kg). All materials required to be as per BIS specifications as per standard/ specification as per direction of EIC. |
| 35 | Steel work welded in build up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladders, railings, brackets, gates and similiar works as per standard/ specification as per direction of EIC. |
| 36 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five leve, excluding cost of centering, shuttering, finishing and reinforcement: (1:1:5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per standard/ specification as per direction of EIC. |
| 37 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in poistion and binding all complete above plinth leve Thermo-Mechanically Treated bars of grade Fe-500D or more as per standard/ specification as per direction of EIC. |
| 38 | Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bses of columns, etc. for mass concrete as per standard/ specification as per direction of EIC. |
| 39 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per standard/ specification as per direction of EIC. |
| 41 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats). Two Coat on Boundary wall as per standard/ specification as per direction of EIC. |
| 42 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Two Coat on Boundary wall as per standard/ specification as per direction of EIC. |
| 43 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work. Gate & Grill as per standard/ specification as per direction of EIC. |
| 44 | S/F decorative cast-iron pole 3.5 m ht, powder-coated, with LED lantern luminaire 2 x 18 W, incl. internal loop-in/ loop-out junction box at the base of each pole with 6 amp SP MCB/Fuses, Internal Vertical Copper Wiring, Crimpiing Lugs, Insolation Tapes, conitnuous 8 SWG GI Earth Wire Loop connecting all face to main earthing system, RCC foundation, base plate, wiring, lamp & fixing — complete as per standard/ specification as per direction of EIC. |
| 45 | S/F cast-iron pole 6.0 m ht at entrance/boundary with 2 x LED flood/street 72 W on bracket, incl. RCC foundation & fixing — complete as per standard/ specification as per direction of EIC. |
| 46 | S/L 3.5C x 16 sqmm XLPE armoured UG cable in HDPE conduit, including trench, sand cushion, bricks, warning tape, backfill and terminations as per standard/ specification as per direction of EIC. |
| 47 | S/F outdoor feeder pillar/lighting panel with MCBs, contactor, timer + photocell auto-control, including earthing (2 sets) as per standard/ specification as per direction of EIC. |
| 48 | S/F pop-up rotary sprinkler (~12 m radius) for lawn, with swing-joint, riser & fittings as per standard/ specification as per direction of EIC. |
| 49 | S/L 16 mm inline drip lateral, 2 l/h emitters @ 30 cm, for hedge/shrub beds, including stakes & fittings as per standard/ specification as per direction of EIC. |
| 50 | S/L rigid PVC main 63 mm + sub-main 50 mm, including trench, laying, specials & backfill as per standard/ specification as per direction of EIC. |
| 51 | S/F zone control set – 2” screen/disc filter, pressure gauge, air-release & flush valve as per standard/ specification as per direction of EIC. |
| 52 | S/F 6-station automatic irrigation controller with 1” solenoid valves & wiring including all low voltage multi core control cabling from controlar to valvse as per standard/ specification as per direction of EIC. |
| 53 | Connection to existing tube-well: 1.5 HP pump, suction/delivery piping, NRV & gate valves, tank tap-off as per standard/ specification as per direction of EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender