Tender For special Repair To Washroom Near Bldg. No. P-23, Provn Of Parking Shed Near Bldg No. 214 And Provn Of Flooring, Joiner, Painting, Railing, And Other Misc Workat W/S Installation At Umroi Mil Stn Under Ge Umroi
Tender Value
37.50 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
8 days left
EMD
75000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ri Bhoi → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Washroom Near Bldg. No. P-23, Provn Of Parking Shed Near Bldg No. 214 And Provn Of Flooring, Joiner, Painting, Railing, And Other Misc Workat W/S Installation At Umroi Mil Stn Under Ge Umroi
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removal to store and S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 2 | Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removal to store and S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 3 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 20 cm girth in brick walls etc complete all as specified and directed. |
| 4 | S&F in repairs 15mm dia bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 5 | S&F in repairs 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 6 | S & F in repair 15mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms) complete all as specified and directed. |
| 7 | S&F in repairs vitreous china wash down water closet pan EWC, white including white plastic water closet seat & back with flat bottom and cover mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed. |
| 8 | S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern including PVC connection pipe of size 15 mm dia, 450 mm long with PTMT nuts complete all as specified and directed. |
| 9 | S&F in repair wash hand basin, white flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc. including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 10 | Supply & fixing in repairs vitreous china urinal half stall type size (465x355x265) white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement; fixing flushing cistern with brackets, grating and union including waste pipe and PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc complete all as specified and directed. |
| 11 | Supply and fixed in repairs vitreous china squatting pan, Orissa pattern of size 580 mmx440mm white with P or S trap, front or back inlet and integral foot rest ( Excluding flushing cistern and flush pipe) including provision of cement concrete bedding (PCC 1:4:8, type D2) complete all as specified and directed. |
| 12 | S & F in repair two way bib taps, 15 mm bore long/ short body, chromium plated with crutch handle, screwed for iron pipe or for brass ferrule and fixed. |
| 13 | S & F Stainless steel Heavy Duty Health faucet, (brushed and wall mount) including taking down old unserviceable health faucet complete all as specified and directed. |
| 14 | S&F in repair Stainless steel toilet paper holder of any size complete all as specified and directed. |
| 15 | S & F in repairs stainless steel tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and as directed. |
| 16 | S&F in repair 600mm x 450mm PVC frame mirror of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 17 | Demolition of cement concrete (un-reinforced) in ground floor and paving exceeding 15cm thickness and removing debries from site of work complete all as directed by the Engineer-in-Charge. |
| 18 | M&L for treatment to sunken floor of Toilet/Bathroom as in following steps:- i) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick in cement mortar 1:3 using approved water proofing compound @ 3% by weight of cement finished even and smooth using extra cement, curved at the junctions. ii) Apply two coats of epoxy resin/polymer modified cementatious coating like brush bond of FOSROK/SIKA/Pedilite both on floor & beams. iii) Sunken slabs to be given 1:20 slope outward 25mm GI pipe spout with 300 mm projection beyond outer surface of wall shall be provided. iv) Water tightness of sunken portion to be tested by ponding with water for 72 hours. In case of even a slight mark of seepage, the portion to be treated and ponding shall be carried out again to confirm the water tightness of sunken slab. Note : No cutting in roof slab/beam shall be allowed for passing of CI pipes & fittings.The stage of water proofing to sunken slab shall be passed by Eng-in-charge/GE. |
| 19 | M&L for PCC 1:5:10 Type E2 (using 40mm graded crushed stone aggregate) as in filling to sunken floor complete all as specified and directed. |
| 20 | Material and labour for coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor over and including 15mm thick screed bed/bedding layer in cement mortar 1:6 including demolition of existing floor tiles and bedding layers and removing from site and rubbish of the premisses complete all as specified and directed. |
| 21 | Material and labour for coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/450 x 350 x 7 mm/450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in CM 1:4 including demolition of existing tiles and cement mortar bedding (but not backing) and removing from site and rubbish of the premisses complete all as specified and directed. |
| 22 | Dismantling water tanks exceeding 500 litres capacity and not exceeding 1000 litres capacity and removing to store complete all as specified and directed. |
| 23 | Supply and fix rotational moulded, multilayer HDPE water storage tank of 1000 litres capacity( tripple layer wall construction, cylindrical vertical with closed top) ISI marked, hoisted and fixed in position all as specified in SSR Part I including 02 Nos 20 mm bore full threaded GI nipple of required size including ball valves 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210gms) and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed |
| 24 | Supply & fix in repair 20mm dia bore gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 25 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down soil pipe/ rainwater pipes (any size or pattern) and all fittings (heads, shoes, bends, swan-necks,etc.) including cleaning or refixing (measured overall as fixed along the centre line over fitting and accesories) complete all as specified and directed. |
| 26 | S&F for 110mm dia PVC bend fixed with rubber ring fixed to wall including scafolding complete all as specified and directed. |
| 27 | S&F for 110mm dia PVC (SWR) branch piece,single (single Y) equal or unequal with access door including scafolding complete all as specified and directed. |
| 28 | S&F for 110mm dia PVC (SWR) junction single (single T) equal or unequal with access door including scafolding complete all as specified and directed. |
| 29 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, including making good disturbed area/surfaces with cement concrete/cement mortar 1:2:4 type B-0, etc including taking down old unserviceable nahani/floor trap complete all as specified and directed. |
| 30 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces as in walls, finished even and smooth without using extra cement including taking down old existing plaster complete all as specified and directed. |
| 31 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. |
| 32 | M&L for complete removal of existing treatment and apply two coat of white wash on old ceiling surfaces complete all as specified and directed. |
| 33 | M&L for preparation of old distempered surfaces of walls and applying a coat of distemper oil emulsion complete all as specified and as directed. |
| 34 | Supply and fixing aluminium anodised (powder coated) ventilator frame (section for frame 63.5 X 38.1 X 1.20mm thick) with shutter(section for shutter 41 x 20 x 1.2mm thick)(bottom half portion fixed and top half portion with louver) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick frosted glass to aluminium frame work and louver using rubber gasket and fixed with stainless steel wire cloth of 0.36 mm dia and average width of aperture 1.40 mm outside vent with staple and suitable wall angle of size 25.4 x 25.40 x 1.1mm thick and fillets with screws and washers etc including Deco Grill of Model / Design No. DG 104 and 6.3mm thick etc. complete all as specified and as directed. |
| 35 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified and as directed |
| 36 | S & F anodised aluminium snap grid frame work for false ceiling of size 600mm X 600mm including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified and directed. |
| 37 | S&F decorative PVC ceiling board of superior quality of size 600mm x 600mm x 5mm thick fixed in aluminium snap grid frame work including fixing accessories complete all as specified and as directed.Note: (i) Frame work shall be measured and paid separately under respective item. (ii) Colour and design of PVC ceiling board shall be approved by GE. |
| 38 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelamaminated PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelamaminated sheet complete all as specified and directed. |
| 39 | Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick Moulded Prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face, and fixing in frame at site as per specification and drawings complete all as specified and directed. |
| 40 | S&F Pressed steel frames for doors of frame size 105x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.Note: Filling of hollow portion of frames with PCC shall be measured and paid separately. |
| 41 | Material & Labour for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and as directed. |
| 42 | Material & labour for PCC type B0 1:2:4 (12.5mm graded stone aggregate) for fixing hold fasts, angle, etc including necessary form work complete all as specified and directed. |
| 43 | S & F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 44 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 45 | S& F Flush shutters(30 mm thick), solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 46 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 47 | M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 48 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. |
| 49 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 50 | S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy and fixed complete all as specified and directed. |
| 51 | Taking down chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 52 | Taking down chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 53 | Excavating in trenches, not exceeding 1.50 m wide & not exceeding 1.5 m in depth; for foundation etc. or for shaft, wells, cesspits, manholes, piers holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 54 | All as per item No 53 here in before but depth exceeding 1.50 m but not exceeding 3.00 m complete all as specified and directed. |
| 55 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed. |
| 56 | Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.50m above the starting point including spreading and levelling complete all as specified and directed. |
| 57 | Demolition and breaking up drain pipes 150mm bore (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed. |
| 58 | Supply & laying Double wall corrugated (DWC) HDPE pipe of 150mm bore (SN-8), thickness greater than 1.30 mm, single socketed in any length with rubber ring joints, laid in trenches or fixed in floor complete all as specified and directed. |
| 59 | M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C2 for 150 mm bore of pipe complete all as specified and directed. |
| 60 | Demolition of RCC of any description and in any position not otherwise specifically provided for including taking out and separating old reinforcement and removal of debries to a distance not exceeding 50m and making site clean complete all as specified and directed. |
| 61 | M&L for precast RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate ) as in cover slab set in cement mortar 1:4 including necessary form work if required complete all as specified and directed. |
| 62 | M&L for TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 63 | M&L for MS deformed or twisted round bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed |
| 64 | Demolition of brickwork or stone/boulder masonry, precast cement concrete block walling in any position, built in cement mortar including all quoins, arches, pillars etc,complete all as specified and directed. |
| 65 | M&L for precast cement concrete 1:3:6 type C1 ( 20 mm graded aggregate ) block masonry with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed. |
| 66 | M&L for 15mm thick rendering in cement mortar 1:4 on internal/external wall surfaces mixed with water proofing compound @ 3 % by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. Note: Water proofing compound will be measured and paid separately |
| 67 | Supply only Water proofing compound |
| 68 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 69 | M&L for cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 70 | M&L for PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in coping, benching/haunching, slightly rounded or chamfred angle and throating etc, complete all as specified and directed. |
| 71 | Excavation in post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil and removing surplus soil to a distance not exceeding 50 m and making good surfaces complete all as specified and directed. |
| 72 | S&F steel work in tubular trusses and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 73 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 74 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed. |
| 75 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 76 | Material and labour for hard core with broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 77 | Material and labour for 75 mm thick Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in flooring, path, hard standing, etc. complete all as specified and as directed. |
| 78 | Supply and fixing aluminium anodised (powder coated) three track sliding window frame with shutters with ( 2 Nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick plain glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc with the following section of frame and shutter complete all as specified and directed:-(a) Sections for shutter:- (i) 'H' section: 39 x 20 x 1.20 mm thick (ii) 'Interlock' section: 39 x 20 x 1.20 mm thick(iii) 'Edge & Bottom' section: 41 x 20 x 1.20 mm thick (b) Section for frame:-(i) Top & Sides: 92 X 29.50X 1.20mm thick (ii) Bottom: 92 X 29.70 X 1.20mm thick |
| 79 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppyling & fixing in the frame at site as per specification & drawing, etc complete all as specified and as directed. |
| 80 | S&F 35 mm thick factory made second class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rails and style as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 81 | S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 82 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls etc, laid, bedded and pointed in any mortar complete all as specified and directed. |
| 83 | M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 84 | M & L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 85 | S&F 15mm dia bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 86 | S&F 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 87 | S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern including PVC connection pipe of size 15 mm dia, 450 mm long with PTMT nuts complete all as specified and directed. |
| 88 | S&F wash hand basin, white flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc. including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 89 | Supply and fixed vitreous china squatting pan, Orissa pattern of size 580 mmx440mm white with P or S trap, front or back inlet and integral foot rest ( Excluding flushing cistern and flush pipe) including provision of cement concrete bedding (PCC 1:4:8, type D2) complete all as specified and directed. |
| 90 | M&L for 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 91 | S&F 15 mm size stop valve, fancy type, chromium plated with long shank and cup(concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union & fixed complete all as specified and directed. |
| 92 | S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 93 | S & F Soap dish chromium plated of size not less than 100mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed |
| 94 | M&L for 75 mm thick cement concrete type C2 1:3:6 using 20 mm graded aggregate as in plinth protection finished fair and even with using extra cement complete all as specified and directed. |
| 95 | M&L for cement concrete type C2 1:3:6 using 40 mm graded aggregate in surface channels and drains complete all as specified and directed. |
| 96 | M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or on concrete surfaces in two layers (10mm thick 1st layer + 5mm thick finishing layer) finished even and smooth with out using extra cement mixed with liquid water proofing compound (for 5mm thick finishing layer only) @ 2% by weight of cement or as per manufacturer's instruction including taking down existing plaster of any description complete all as specified and directed. Note: Liquid water proofing compound will be measured and paid separately |
| 97 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 98 | Material and labour for 5 mm thick rendering in cement mortar (1:3) on fair faces of exposed/non exposed concrete surfaces such as soffits of slabs, chajja, facia and simillar work including mixing & application of integral water proofing compound as per manufacture instruction of finishing the surfaces fair and even including taking down of cement plaster of any description including racking out joints for key scrubing with water complete all as specified and directed. |
| 99 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqmm over new surfaces including necessary scaffolding work upto tripple storey buildings complete all as specified and directed. |
| 100 | Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of new plastered surfaces complete all as specified and directed. |
| 101 | M&L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over alkali resistant primer complete all as specified and as directed |
| 102 | Material & Labour for complete removal of the existing treatment of old plastered surface of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old surfaces complete all as specified and as directed. |
| 103 | Material and labour for preparation of old surfaces of ceiling and applying two coats of white wash surfaces on ceiling including preparation of old surfaces complete all as specified and directed |
| 104 | Material and labour for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 105 | M & L for Chequered cement concrete tiles of size 30cm x 30 cm x 25mm thick with mixture of white and grey cement in equal portions and no pigment, set over 20mm thick screed bed or bedding layer of cement mortar of 1:4 for laying floor finishes, jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 106 | S & F anodised aluminium frame, powder coated (minimum thickness 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.Note: Colour of powder coating shall be approved by GE. |
| 107 | Supply & fixing sheet glass ordinary quality 4.0mm thick glazing in square/ rectangle not exc 0.50 sqm each pane with oil putty or aluminium beads fixed to steel /aluminium frame, etc. complete all as specified and as directed. |
| 108 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces as in walls, finished even and smooth without using extra cement complete all as specified and directed. |
| 109 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 110 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 111 | Taking down carefully MCB DBs SP/TP by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for re-use at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. |
| 112 | M & L for point wiring for one light/fan point controlled by one, one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed to wall/ceiling with and including 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity wire (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed. |
| 113 | All as per serial item No 112 here in before but for one 3 pin 5 Amp socket outlet on independent board. |
| 114 | All as per serial item No 112 here in before but for one 3 pin 5 Amp socket outlet on same board with other switches. |
| 115 | M&L for point wiring with 2.5 sqmm FRLSH PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable drawn in PVC casing and caping on surface wall, ceiling with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLSH) (multistanded) PVC insulated and unsheathed cable as earth wire to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed. |
| 116 | Supply and fixing switch piano flush type 240 Volts 5 Amps, SP, one way with white colour complete all as specifed and directed. |
| 117 | Supply and fixing socket 5 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified and directed. |
| 118 | Supply and fixing switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) with white colour complete all as specified/ directed. |
| 119 | Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) with white colour complete all as specified and directed. |
| 120 | Supply and fixing ceiling rose surface 3Phase/PVC/Polycarbonate, isolated body complete all as specified and directed. |
| 121 | Supply and fix MCB SPN DB 8 way double door, IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed. |
| 122 | Supply and fix MCB SPN DB 4 way double door, IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed. |
| 123 | S&F MCB SPN 32 to 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed. |
| 124 | S&F MCB, SP 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed. |
| 125 | S&F lamp holder, 240 volt 50 HZ, white PVC/Polycarbonate type angle/batten fittings complete all as specified and directed. |
| 126 | M&L for cutting circular hole at any type of wall of suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including, making good to disturbed surfaces of wall to match as per the existing colour complete as directed and specified. |
| 127 | Supply and fix exhaust fan, metallic body AC single phase, 230V of size 300mm sweep with, blades, frame and louvers complete all as specified and directed. |
| 128 | Supply and fixing LED batten fitting 1x18 watts including tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting complete all as specified and directed. |
| 129 | S&F swing arm surface mounted wall light lamp with LED bulb of dimension 9cmx18cm of gold colour, metal body complete all as specified and as directed |
| 130 | Material & labour for sub main wiring with two runs of single core, FRLSH 6 sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi-standed copper conductor cable LT 1100 volts grade drawn through PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking down of old unserviceable submain wiring complete all as specified and directed. Note : Two run of 6 Sqmm cable, one run of casing caping and one run of 6 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 131 | S&F LED bulb warm white colour 7-9 watt 6500k compatable with B22 holder complete all as specified and directed |
| 132 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust, common salt all around earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with 6mm dia MS bars @ 75mm C/C both ways and provision of suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. including testing on completion complete all as specified and as directed . Note: The rate quoted is deemed to be inclusive of minimum 7.5 metre earthing wire. |
| 133 | Material & labour for sub main wiring with two runs of single core, FRLSH 1.5 sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi-standed copper conductor cable LT 1100 volts grade drawn through PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 1.5 sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly complete all as specified and directed. Note : Two run of 1.5 Sqmm cable, one run of casing caping and one run of 1.5 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 134 | Supply & filling sand for cushioning to the under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable complete all as specified and directed.Note: Punned thickness shall be measured and paid under this item. |
| 135 | M&L for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables, laid dry and flat complete all as specified and directed. |
| 136 | Supply, laying, testing & commissioning UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross section area 6 sq mm 2 core including taking down of old unserviceable cable/ACSR conductor complete all as specified and directed. |
| 137 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender