Tender For Repair And Painting/Polishing To Misc Furniture At School Of Arty Under Ge Deolali
Tender Value
49.95 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
2 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Painting/Polishing To Misc Furniture At School Of Arty Under Ge Deolali
BOQ
| Sl. No. | Item Description |
| 1 | Chair Barber , TP |
| 2 | Replacement of old unserviceable SS round base and Supply and Fixing new SS round base as per Existing patttern & requirement as approved by Engr-in-charge. |
| 3 | Removing of old leatherette cloth of seat and beck and S & F new leatherette cloth and (leatherette of approved quality and shade) for seat and back of chair Barber. |
| 4 | Removing of old unserviceable handle and S & F new handle of SS as per exixting patten.It shall be scratch and whether Resistance handle of as per exsting patter or directed by Engineer in Charge. |
| 5 | Removing the existing broken bottom gas lift (Up & Down) hydraulic with pouch (Maintenance free environmental friendly, chrome free cylinder tube shll be fixed in a MS black powder coated outer central column tube 38 mm dia and 2mm thick. It shall have 100 mm stroke length and gas pressure of 300 newton force, should under go an impact test)from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch of Make : Godrej or equivelent Note : Adjustable Tilting Mechanism to be designed with the following mechanism. Forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement) |
| 6 | Auditorium Chair 450mm x 460mm, TP |
| 7 | Removing of old tapestry cloth of seat and back and S & F new tapestry cloth/Rexin and (tapestry/rexin of approved quality and shade) for seat and back of Auditorium chair. |
| 8 | Removing of unserviceable telscopic channel and supply and fixing of new telescopic channel of auditorium chair. |
| 9 | Table Bed Side , TP/FD |
| 10 | Removing of unserviceable plywood back side and S&F new plywood 6 mm ply BWR grade-I commercial (all as directed and shown on drgs) Make- Kitply / century/Sainik |
| 11 | Removing of unserviceable Top/side of table bed side and providing & fixing he new 18 thick Prelaminated MDF Board with PVC Beading around.(Top and both sides shall be counted as single Unit)Make-century/kitply/action Tesa |
| 12 | Removing of unserviceable Drawer (Full Set) and Supply and fixing the new Drawer (Full Set) with suitable handle as per exixting pattern & directed by engr-in-charge. |
| 13 | Three Seater Airport Chair , TP |
| 14 | Removing the existing unserviceable/broken Stainless Steel leg and supply and fix new Stainless Steel of size as per existing pattern with for three seater airport chair and all as directed/specified and as shown on drg. |
| 15 | Removing the existing unserviceable/broken arm rest and supply and fix new arm rest of existing size for three seater airport chair and all as directed/specified and as shown on drg. |
| 16 | Removing the existing unserviceable/broken Stainless Steel perforated seat of chrome finish and supply and fix new Stainless steel perforated seat of chrome finish size existing pattern with for three seater airport chair and all as directed/specified and as shown on drg. |
| 17 | Material and labour for preparing the surfaces of old MS bottom frame of three seater airport chair with one coat of synthetic enamel paint as per approved shades and all as directed/specified and as sshown on drg. |
| 18 | Chair revolving with Arm Mesh back, TP |
| 19 | Removing the existing unserviceable Mesh back with neck support and supply and fix the new Mesh back with neck support all as shown on drg and as directed. |
| 20 | Removing the existing un serviceable/damaged seat fabric including foam and supply and fix the new seat fabric including foam of seat 510mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with fabric and moulded polyurethane foam) |
| 21 | Removing the existing broken bottom gas lift (Up & Down) hydraulic with pouch (Maintenance free environmental friendly, chrome free cylinder tube shll be fixed in a MS black powder coated outer central column tube 38 mm dia and 2mm thick. It shall have 100 mm stroke length and gas pressure of 300 newton force, should under go an impact test)from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch of Make : Godrej or equivelent Note : Adjustable Tilting Mechanism to be designed with the following mechanism. Forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement) |
| 22 | Removing the existing broken Pedstal assembly from revolving chairs and computer chairs and supply and fixing of Chrome Base Pedestal assembly of 600mm to revolving chairs and computer chairs etc ,supply and fix new fibre caster wheel Make : Godrej or equivalent |
| 23 | Removing the existing broken padded Arm rest (Black integral skin polyurethane finforced with MS insert. It shall be scratch and weather reisistant) as per sample from revolving chairs & computer chairs ,supply and fix new arm rest make : Godrej or equivalent |
| 24 | Chair Varndah - FD-256, 219 |
| 25 | Removing of old cane from chair varandah steel (bottam and back) and applying one coat of synthetic enamel white on all over surface after sanding/scrubbing with sutaible sand paper.their after re-canning with new best quality plastic cane 4mm wide, white colour complete all as specified and directed.Make : Maharastra plastic industries / Indian plastic / National Cane (Kachigm – Daman) |
| 26 | Removing old / unserviceable cane from wooden Chairs (other than chair verandah) and re-caning with new plastic cane, white, 2mm wide weaving in holes of the frame and alongwith periphery of weaving work with 4mm wide white plastic cane in Godrej pattern & as specified, shown on drawing and as directed by Engineer-in-Charge. Make : Maharastra plastic industries / Indian plastic / National Cane (Kachigm – Daman) |
| 27 | Chair Dining - FD-279 |
| 28 | Removing of the following unserviceable/broken wooden Parts from chair dining and Supply & Fixing of New Parts made out of Ist class hard Wood (Teak) duly polished, made to shape and size as per existing drgs, including max no of six brackets (06) used in tightening of entire chair, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and polishing of complete chair after sanding by suitable sand paper. all as specified and shown on drgs and as directed by Engineer-in-Charge.(Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish,pvc shoes , screws, nails bamboo pins,brackets etc required as directed including labour for fixing new parts |
| 29 | Supply Front/ Rear legs of chair dining first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 30 | Supply new front rail/side rail/ back rail of chair dining first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 31 | Supply new bottam stiffener of chair diningfirst class hard teak wood,made to shape complete all as specified and shown in drg. |
| 32 | Chair Writing - FD-202/250/280 |
| 33 | Removing of the following unserviceable/broken wooden Parts from Chair Writing and Supply & Fixing of New Parts made out of Ist class hard Wood (Teak) duly polished, made to shape and size as per existing drgs, including max no of (06) brackets used in tightening of entire chair, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and polishing of complete chair after sanding by suitable sand paper.all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish , screws, nails bamboo pins etc required as directed including labour for fixing new parts) |
| 34 | Supply Rear legs of chair writing first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 35 | Supply arm rest of chair writing first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 36 | Supply front legs of chair writing first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 37 | Supply new side/front/back rail of chair wrirring first class hard teak teak wood,made to shape complete all as specified and shown in drg. |
| 38 | Supply with new bottam stiffener of chair writing first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 39 | Chair Easy - FD-201 & 229 |
| 40 | Removing of the following unserviceable/broken wooden Parts from chair easy and Supply & Fixing of New Parts made out of Ist class hard Wood (Teak) duly polished, made to shape and size as per existing Drgs, including max no of brackets (06) used in tightening of entire chair, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and polishing of complete chair after sanding by suitable sand paper. all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish , screws, nails bamboo pins etc required as directed including labour for fixing new parts) |
| 41 | Supply of Front/Rear legs of chair easy first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 42 | Supply new back batten of chair easy first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 43 | Supply new arm rest of chair easy first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 44 | Supply new front & back/Side rail of seat/back of chair easy first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 45 | Bed Ply top - FD 246 |
| 46 | Removing of the following unserviceable/broken wooden Parts from Bed Ply Top and Supply & Fixing of New Parts (new wooden parts duly polished), made to shape and size as per dgs, including tightening of Bed by wooden brackets, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish ,brackets, screws, nails bamboo pins etc required as directed including labour for fixing new parts |
| 47 | Supply of duly polished Teak veener on both side to both head rest & Foot Rest |
| 48 | Supply only Batten of size 50 mm X40mmX900mmL made out of 2nd class hard wood |
| 49 | Supply only plywood top of hard bed 12mm thick commercial BWP grade-IS 710, 7 ply,(Make Hindo Ply/Neuro Tuff Ply /Kit Ply ) and 4 nos of TeakWood Corner 100x100mm between the legs and long rails.as per specified & shown on drwg |
| 50 | Table Writing - FD 275/249 |
| 51 | Removing of the following unserviceable/broken Parts from Table Writing and Supply & Fixing of New Parts (new wooden parts duly polished), made to shape and size as per drgs, including tightening of completeTable by brackets, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as brackets, polish , screws, nails bamboo pins etc required as directed including labour for fixing new parts) |
| 52 | Supply new legs of table writing of first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 53 | Supply new bottam stiffner of table writing of first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 54 | Supply new drawer/shutters, drawers to be run on telescopic channels and bottom cupboard fixed with magnetic catcher and piano type hinges. (Box shall be made of 18mm thick prelaminated MDF Board except backside shall be made of 6mm commercial plywood complete all as specified and shown in drg. |
| 55 | Supply & fixing in replacement of handle as per sample approved by GE/Engr-in-Charge |
| 56 | supply new Pre-laminated MDF Board 18/19mm thick light shade as approved by GE with 6mm thick teak wood beading alround the edges of partical board complete all as specified and shown in drg. |
| 57 | Table Centre - FD 274 |
| 58 | Removing of old unserviceable top of table centre & Tightning the centre table with 04 Nos brackets and supply & fixing new Pre-laminated MDF Board 18/19mm thick light shade as approved by GE with 6mm thick teak wood beading around the edges of partical board complete all as specified and shown in drg. |
| 59 | Sofa Set - FD -258/373 |
| 60 | Removing of Old/Unsv foam cushion with tapestry cloth from Sofa Set 5 Seater (3 Pieces)and Supply & Fixing of New Foam Cushion of size 21\\"X22\\"X100mm Thick of 40 density covered with new malmal and tapestry cloth of best quality as approvd by GE/Engineer-in-Charge (10 Nos in Each Set, Five from seat & five from back) Make - Sleepwell/Kurlone . Note- Tapestry cloth not less then Rs 200/- per mtr. |
| 61 | Removing of old unserviceable cushion cover and supply and fixing with new cord type covered with malmal (cloth lining) and there after top cover with closely woven fabric as approved by Engr - in - charge and cost of tapestry cloth shall not be less than Rs 200/- Per mtr. (10 Nos of Each Set, Five from seat & five from back) |
| 62 | Sofa set 5 seater - FD 373 |
| 63 | Removing of old unserviceable cushion cover and supply and fixing with new cord type covered with malmal (cloth lining) and there after top cover with closely woven fabric as approved by Engr - in - charge and cost of tapestry cloth shall not be less than Rs 200/- Per mtr. (10 Nos of Each Set, Five from seat & five from back) |
| 64 | Removing of Old/Unsv foam cushion with tapestry cloth from Sofa Set 5 Seater (3 Pieces)and Supply & Fixing of New Foam Cushion of size 21\\"X22\\"X100mm Thick of 40 density covered with new tapestry cloth of best quality as approvd by GE/Engineer-in-Charge (10 Nos of Each Set, Five from seat & five from back) Make - Sleepwell/Kurlone . Note- Tapestry cloth not less then Rs 200/- per mtr. |
| 65 | Chair Dining Cushioned (MAP) - FD/E6/MAP/06, FD/E6/MAP/04,FD/E6/MAP/10R |
| 66 | Removing of the following unserviceable/broken wooden Parts from chair dining and Supply & Fixing of New Parts (new wooden parts duly polished), made to shape and size as per drgs, including tightening of chair by wooden brackets, fixing of joints with glue and bamboo pins and all as specified and shown on drgs and as directed by Engineer-in-Charge.(Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish ,brackets, screws, nails bamboo pins etc required as directed including labour for fixing new parts) |
| 67 | Removing of old unserviceable cushioned seat of chair dining (MAP)and supply & fixing new cushioned seat with aproved tapestry for chair dining (MAP) cushioned Seat shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75x75x25mm Teak Wood stoppers, ftoppers to be fixed at four corners of main frame of chair complete all as specified and shown on drawing as approvd by Engineer-in-Charge.Make of foam :- Fetherfoam/ sleepwell/ kurlon.(Note- Tapestry cloth not less then Rs 200/- per mtr). |
| 68 | Chair Dining Long back Cushioned |
| 69 | Removing of the following unserviceable/broken wooden Parts from chair dining long back cushioned and Supply & Fixing of New Parts (new wooden parts duly polished), made to shape and size as per drgs, including tightening of chair by wooden brackets, fixing of joints with glue and bamboo pins and all as specified and shown on drgs and as directed by Engineer-in-Charge.(Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish ,brackets, screws, nails bamboo pins etc required as directed including labour for fixing new parts) |
| 70 | Removing of old unserviceable cushioned seat and back of chair dining long back cushioned and supply & fixing new cushioned with approved rexin/tapestry (as required) for seat and Back of chair dining long back cushioned Seat shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75x75x25mm Teak Wood stoppers, ftoppers to be fixed at four corners of main frame of chair complete all as specified and shown on drawing Make of foam :- Jyoti foam/ sleepwell/ kurlon/Komfort. |
| 71 | Peg Table - FD 277 |
| 72 | Removing of old unserviceable top of table peg and tightining the frame by means of screw/brackets and supply & fixing new Pre-laminated MDF Board 18/19mm thick light shade as approved by GE with 4 mm thick teak wood beading alround the edges of partical board complete all as specified and shown in drg. |
| 73 | Chair Dining MAP JCO/Ors |
| 74 | Removing of the fllowing unserviceable / broken PVC seat of chair dining MAP and supply & fixing PVC seat 4 mm thick with holes screwd with rails and supporting 25x25 mm wooden stiffner provided for support to center of the pvc seat and polishing of complete chair after sanding by suitable sand paper. Make : Harmony/AMCO/Supreme |
| 75 | Table Dining 4'x3' / 4 persons - FD 273 |
| 76 | Removing of the following unserviceable/broken wooden Parts from Table Dining4'X3' and Supply & Fixing New Parts (new wooden parts duly polished), made to shape and size as per Drgs, including tightening of complete Table with Wooden Brackets, fixing of joints with glue and bamboo pins,S & F new superior quality pvc shoes and all as specified and shown on drgs and as directed by Engineer-in-Charge. (Notes- (a) New parts will be measured and paid for separately as supply only here-in-after) (b) Unit rate quoted for this item shall include the cost of complete labour element & minor items such as polish , screws,brackets, nails bamboo pins etc required as directed including labour for fixing new parts) |
| 77 | Supply new legs of table dining 4'x3'of first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 78 | Supply new long rails of table dining 4' x3'of first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 79 | Supply new short rails of table dining 4'x3' of first class hard teak wood,made to shape complete all as specified and shown in drg. |
| 80 | supply new Pre-laminated MDF Board 18/19mm thick light shade as approved by GE with 6mm thick teak wood beading alround the edges of partical board complete all as specified and shown in drg. |
| 81 | Removing unserviceable / broken top Knob and S & F new Decorative Knob of approved quality by means of req screw to various Fur Items like Side Board/Book case/ various Tables other Items |
| 82 | Removing unserviceable / broken top Handle and S & F new Decorative Handle of approved quality to various Fur Items like Side Board/Book case/ various Tables other Items |
| 83 | Teapoy - FD 382 |
| 84 | Removing of old unserviceable top of teapoy and supply and tightining the frame by means of screw/brackets & fixing new Pre-laminated MDF Board 18/19mm thick light shade as approved by GE with 4mm thick teak wood beading alround the edges of partical board complete all as specified and shown in drg. |
| 85 | Chair Easy cushions |
| 86 | Removing of old unserviceable cushioned seat & back of chair easy cushions and supply & fixing new cushioned seat and back of approved rexin for chair easy cushioned Seat & back shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75x75x25mm Teak Wood stoppers, floppers to be fixed at four corners of main frame of chair complete all as specified and shown on drawing Make of foam :- Fetherfoam/ sleepwell/ kurlon. |
| 87 | Removing of old unserviceable cushioned from chair arm of chair easy cushions and supply & fixing new cushioned to arm with approved rexin for chair easy cushioned all as specified and shown on drawing Make of foam :- Fetherfoam/ sleepwell/ kurlon. |
| 88 | Hat stand W/M - FD 233 |
| 89 | Removing old / unserviceable plywood / teak veneered and provide new 6 mm thick with teak veneered one side and commercial face veneers duly polished on other side shown on as per drg. |
| 90 | Removing old / unserviceable Pegs and provide new pegs shall be of mild steel copper oxidized shown on as per drg. |
| 91 | Table Bed Side - FD 276 |
| 92 | Removing old / unserviceable Supply only plywood of back side 6 mm thick commercial plywood BWR grade (Make ,Kit Ply/Green Ply) |
| 93 | Removing of old top & Supply and fixing of new MDF Board of 12mm to top of Table bed side, 4 mm teak around edging around all as specified and shown on drwg |
| 94 | Removing of old both sides & Supply and fixing of new MDF Board of 12mm to both side of Table bed side, 4 mm teak around edging around all as specified and shown on drwg |
| 95 | Removing of unserviceable /broken shelves and providing new shelves made out of 12mm thick pre laminated MDF Board |
| 96 | The wood components shall be rubbed with apropriate size sand paper along the grains to remove any dust/ wax/unwanted stains from the surface. Any cracks or holes shall be filled with suitable wood filler of good quality approved by Engr -In - Charge. Two to three coats of French Polish shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required as directed by Engg-In-Charge. Polishing to the following wooden furniture items will be also carried out in Officer /Jco/Ors Qtrs and unit lines location :- |
| 97 | Book Case - FD 45, FD 237 |
| 98 | Bed W/Ply top w/o FMN FD - FD 246/247 |
| 99 | Chair Dining - FD-279 |
| 100 | Chair Easy - FD-201 & 229 |
| 101 | Chair Writing - FD-202/250/280 |
| 102 | Chair Easy Cushioned - FD 358 |
| 103 | Display Board 1220x 1220mm - TP |
| 104 | Hat stand W/M - FD 233 |
| 105 | Locker Bed side P - DB 4074 |
| 106 | Peg Table - FD 384/277 |
| 107 | Sofa Set 5 Seater - FD-373/281 , 258 |
| 108 | Sofa Set 4 Seater - FD-373/281 , 258 |
| 109 | Sofa single Chair - FD 373 |
| 110 | Side Board - FD 1112, FD 241, FD 371 |
| 111 | Table Writing - FD-249/275 |
| 112 | Table Writing Medium - DB 3987, 3955 |
| 113 | Table Dressing Gents W/M - FD-23, 31, 230/379 |
| 114 | Table Dressing Ladies W/M - DB 3980, FD- 45 (M), FD 378 |
| 115 | Table Bed Side - FD 248 / 276 |
| 116 | Table dining 4 persons, 1200 mm X 900 mm X 760 mm: DrgNo FD -273 |
| 117 | Table office clerk - DB-4120 |
| 118 | Table office officer steel - DB 4119 |
| 119 | Teapoy - FD 382, DB 3675 |
| 120 | Table Dining 6 pers - DB 10081 / FD -273 |
| 121 | Table Dining 8 pers - FD-273 |
| 122 | Table 900x 900 x 760 mm w/Dvr - FD 291, FD 283 |
| 123 | Table Centre - FD 29 /274 |
| 124 | Table 3x2 with drawer - FD 41/224FD |
| 125 | Table 3x2 with out drawer - FD 284/231 |
| 126 | Sofa Set 5 Seater set of (3+1+1) w/cushion - FD/MAP-II/02 |
| 127 | Bin solid Linen Multipurpose - FD/MAP/06 |
| 128 | Chair dining Map JCO/Ors - FD/MAP-II/05 |
| 129 | Chair Dining Map - FD/MAP - II/04 |
| 130 | Table Dressing Ladies Including Stool - FD/E6/MAP-II/07 |
| 131 | Table Dressing Gents w/m - FD/E6/MAP-II/18 |
| 132 | Table dining 4 persons, 1200 mm X 900 mm X 760 mm: - FD/MAP-II/03, |
| 133 | Table dining 6 persons, - 1500 mm X 900 mm FD/MAP-II/03 |
| 134 | Teopoy P - DB 3975 |
| 135 | Almirah Med 1/2S x 1/2 H - DB 4232 |
| 136 | Almirah Med w/s - DB 3954 |
| 137 | Almirah Large W/S - DB 4232, DB 4116 |
| 138 | Rifle Rack - TD/2K/CWE/15 |
| 139 | M & L for preparing of furniture items as per following steps : (i) Denting of bent surface wih the help of hammer in best workmanship manner. (Ii) Removing old paint by scubbing with sand paper 150 no throughly (ii) Applying one coat of metal primer make: asian / dulux/ nerolac. (iv) Applying metal putty to even the surface and wait period of 2-3 hours to be given for putty to set and dry completely, Scrub off the excess putty with 150 No sand paper and spraying little amount of water simultaneously.(v) Wipe the surfface with soft dry cloth and apply two coat of enamel paint by means spray painting shade as approved by GE DVL / Engr - In -Charge. Make Asian (Apcolite), Berger (Luxol), Shalimar (Superlac) Note- All fur itms parts are to be completed painted and Polished (if any wooden part), dissembling/assembling of fur item to be done as per requirment.Painting to the following furniture items will be also carried out in Officer /Jco/Ors Qtrs and unit lines locations |
| 140 | Almirah Large Steel w/s & w/k - FD 67, FD 1031, FD/E6/MAP/18 |
| 141 | Almirah Med Steel w/s & w/k - D 67/ FD 1031, FD 243, FD 1032, FD/E6/MAP/18 |
| 142 | Almirah Large steel 1/2 s x1/2 H - FD 1033 |
| 143 | Chair CB steel with arms - FD-75(M) |
| 144 | Chair CB Steel without arms - FD-75(M) |
| 145 | Chair CBA spl Hand Rest - FD 120 |
| 146 | Chair Varandah - FD No-219, FD 256, FD/MAP-II/06, |
| 147 | Locker Bed side steel - FD-1029 |
| 148 | Table 3’x2’ with drawer (steel frame) - FD 1007 |
| 149 | Table 3' x 2' without drawer (steel frame) - FD 1008 |
| 150 | Teapoy Varandah - FD 255, 383, FD/E6/MAP/17 |
| 151 | Table Office Clerk Steel - FD 84(M) & 1004 |
| 152 | Table Class room steel - FD 45, 75 |
| 153 | Table Dining Ors w/zink - top FD 165 (M) |
| 154 | Table office officer steel - FD 84 (M), FD 1003 |
| 155 | Chair School W/Hand Board - FD/E6/MAP/05 |
| 156 | Table Bed Side steel MAP - FDE6/MAP/15 R |
| 157 | Bed Hard W/Ply top MAP - FD/E6/MAP/08R |
| 158 | Chair Writing Steel Map - FD/E6/MAP/12 |
| 159 | Shoe Rack Steel - FD/E6/MAP/02R |
| 160 | stool steel - FD 81/119 |
| 161 | side rack with tray steel - FD 1023 |
| 162 | Trestle store room - FD 43/1043 |
| 163 | Rack 6 tier steel - FD 1038/1039 |
| 164 | Charpoy W/Hard top - FD/E6/MAP/II/01 |
| 165 | Fmn set Iron for Charpay GI Pipe - FD 21/53 |
| 166 | ALMIRAH LARGE STEEL WITH SHELVES OR 1/2 S x 1/2 H:- - FD-67/1031/Map |
| 167 | Removing of old unserviceable MS clamps/ Bracket and supply & fixing of new MS clamps/ Bracket with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. |
| 168 | Removing of old unserviceable lock and supply & fixing of new 6 lever lock with duplicate keys, by nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. Make:link /Godrej/Standard/Aligarh or Equvalent approved by GE |
| 169 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge. |
| 170 | Removing of old unserviceable MS shelve, supply & fixing of new MS shelve made to shape out of 1mm thick MS sheet fixing by bolts or welding, MS black sheet duly painted with two coats of synthetic enamel paint per given in drawing and site requirement complete all as specified and directed by Engr -In - Charge. Paint Make-Asian/Delux/Nerolac |
| 171 | Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge. |
| 172 | Removing unserviceable leg and providing new leg made out of 1 mm thick MS black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting and welding to almirah large steel with shelves |
| 173 | ALMIRAH MEDIUM STEEL WITH SHELVES:- - FD-1032 |
| 174 | Removing of old unserviceable MS clamps/bracket and supply & fixing of new MS clamps/bracket with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. |
| 175 | Removing of old unserviceable lock and supply & fixing of new 6 lever lock with duplicate keys, by nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. Make:link /Godrej/Standard/Aligarh or Equvalent approved by GE |
| 176 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge. |
| 177 | Removing of old unserviceable MS shelve, supply & fixing of new MS shelve made to shape out of 1mm thick MS sheet fixing by bolts or welding, MS black sheet duly painted with two coats of synthetic enamel paint per given in drawing and site requirement complete all as specified and directed by Engr -In - Charge. Paint Make-Asian/Delux/Nerolac/Shalimar |
| 178 | Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. |
| 179 | Removing unserviceable leg and providing new leg made out of 1 mm thick MS black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting and welding to almirah Med steel with shelves . |
| 180 | LOCKER BEDSIDE STEEL:- - FD-1029 |
| 181 | Removing of old unserviceable Hasp adn Staple and supply & fixing of new Hasp and Staple with duplicate keys, by nut bolts or welding as per given in drawing and site requirement complete all as specified and directed by Engr -In -Charge. |
| 182 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long/Door Handle with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. |
| 183 | Removing of old unserviceable leg and supply & fixing of new leg made out of 1mm thick MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting, fixing by nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. |
| 184 | Charpoy GI Pipe W/Ply top |
| 185 | Removing of unserviceable plytop from charpoy GI Pipe, Tightining of entire the loose frame and Supply and fixing of 12 mm thick plywood BWP Grade - IS 710 including 3 Nos MS Square tube of size 25 mm x 25 mm , 16 Gauge along width of charpoy, fixed duly welded with frame as support to plywood with hole and fixed with required size nuts & bolts all as specified and directed by Engr - In - Charge. Make : Kitply / century/Anchor/Hindo |
| 186 | Bed Hard Map - FD/E6/MAP/08R |
| 187 | Removing of unserviceable plywood and Supply and fixing new 12 mm ply BWP Grade - IS 710 commercial tp Bed Hard Map of size all as shown on drg. Make- Kitply / century/Sainik/anchor |
| 188 | Removing of unserviceable MDF/Particle Board of Head rest and Foot rest and Supply and fixing new 18/19mm thick Prelaminated MDF Board one of exterior Grade with PVC Beading around to Bed Hard Map of size all as shown on drg. Make- Kitply / century/Sainik |
| 189 | Material and labour for welding to broken joints or Tighting of entire frame by means of nuts bolts of Bed Hard Map complete all as specified and directed by Engr -In -Charge. |
| 190 | TABLE STEEL 900 X 900 X760MM FD-1009 |
| 191 | Removing worn out top of table and Supply and Fixing new top of size 900 x 900mm , made out with 18/19 mm thick prelaminated MDF Board (Make -Ecoboard/Kitply/Action Tesa ) with natural teak finish, one side fixed with PVC beading all round the top ( complete all as directed.) |
| 192 | Taking out existing unserviceable MS Square tube of table steel 900x900x760 FD/Table steel 900x600x760mm and welding the frame by providing new MS Square tube of size 25 mm x 25 mm 16 gauge (Complete all as directed by Engr-in - charge) |
| 193 | Table steel 900X600x760mm. - FD-1007/1008 |
| 194 | Removing the worn out table top and Supply and Fixing new table top of size 900mmx 600mm made out of 18 /19 mm thick pre-laminated MDF Board natural teak finish, one side fixed with PVC beading all round the table top ( All as shown in drawing.) |
| 195 | Taking out existing unserviceable MS Square tube of table steel 900x600x760 FD/Table steel 900x600x760mm and welding the frame by providing new MS Square tube of size 25 mm x 25 mm 16 gauge (Complete all as directed by Engr-in - charge) |
| 196 | Removing unserviceable lock ,supply & fixing new drawer brass lock with stainless steel duplicate keys for table steel 900x600x760mm. Make :- Godrej/Aligarh or equivalent approved by GE |
| 197 | Chair Writing Steel Map - FD/E6/MAP/12 |
| 198 | Replacement of old unserviceable arms with new black integral skin polyuretheane with 75-85 shore 'A' hardness and reinforced with MS Insert both hand rest sections to have slope towards front as per trades patttern. |
| 199 | Removing the old unserviceable Cantilever Tubular Frame and Supply and Fixing New Cantilever Tubular Frame along with bottom and back support all as per exsting pattern or directed by engr-in charge. |
| 200 | Removing the old unserviceable seat and back cover and Supply and Fixing the new seat and back cover , polyurethane foam shall be moduled with density 50 -55 kg per cubic meter thick and hardness 20 +/-2 kg on hampden machine and moduled polyrethane foam with PVC lipping all around as per drawing. |
| 201 | Chair Varandah - FD 256, FD/E6/MAP/06 |
| 202 | Material and labour for welding to broken joints of frame of chair varandah complete all as specified and directed by Engr -In -Charge. |
| 203 | Removing the old unsv PVC seat & back,Supply & fixing new Seat & Back 4 mm th with wt not less than 1.85 Kg Make : PVC Harmony/VIRGO/ AMCO |
| 204 | Note: Amount of sch of credit of Rs.25170/-will be deducted from total amount of BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender