Tender For Repairs To Cleaning Of Sewage Line, Septic Tank, Repairs Of Drain, Replacement Of Soil/Waste/Vent Pipe, Cover Slab, Repairs To Fencing And Gate Etc At Army Land Under Ge C Bell Bay
Tender Value
40 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
21 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Cleaning Of Sewage Line, Septic Tank, Repairs Of Drain, Replacement Of Soil/Waste/Vent Pipe, Cover Slab, Repairs To Fencing And Gate Etc At Army Land Under Ge C Bell Bay
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cleaning the chocked soakage of manholes of any size and depth and removing scum/sludges to a distance exceeding 500m and Not exceeding 1.5Km and cleaning with fresh water by taking out carefully cover slab placing in position including setting the cover slab in CM 1:6 complete all as specified and as directed. |
| 2 | M&L for cleaning of blocked CI pipe line 100 mm bore, carefully in between manholes using split bamboo, cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete all as specified and as directed. |
| 3 | M&L for cleaning of blocked CI pipe line 150 mm bore, carefully in between manholes using split bamboo, cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete all as specified and as directed. |
| 4 | M&L for removing RCC cover slab of septic tanks of various capacities and taking out scum/sludge’s including foul water and collect the same in closed container and depositing in earth pit of sufficient size and depth in any type of soil within the defence land where directed by Engineer-in-Charge to a distance exceeding 500m and Not exceeding 1.5Km, returning and filling in earth in excavated pit after complete disposal of scum/sludges chamber inlet and outlet pipe, MS rungs, septic tank cleaning with fresh water applying one coat of bituminous paint on steel surfaces such as MS rungs handle, inlet and outlet pipes etc, and filling tank with fresh water upto level as directed placing the RCC cover slab in position and set in CM 1:6 including cleaning the sewage line from last manholes to septic tank complete all as specified and as directed |
| 5 | Demolition of (unreinforced) concrete of any description and in any position not otherwise specifically provided concrete complete all as specified and directed. |
| 6 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in concrete portion and making good disturbed ground complete all as specified and directed. |
| 7 | Dismantling fencing wire mesh, any type or any position complete all as specified and directed |
| 8 | Dismantling structural steel work inluding doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 9 | Material and Labour for providing plain cement concrete 1:3:6 type C-2 (40mm graded crushed stone aggregate) as in fdn filling and mass concrete . complete all as specified and as directed. |
| 10 | Demolition of precast cement concrete article and precast concrete walling, build in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed. |
| 11 | Taking down cement plaster on brick or precast PCC block masonry walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 12 | M&L for plain Cement concrete in 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in surface channels and drains as specified and directed |
| 13 | M&L for Precast Cement concrete solid block masonry type C1 (1:3:6) (using 20mm graded crushed aggregate), exceeding 10cm in width set in cement mortar 1:4 complete all as specified and directed. |
| 14 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 15 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed |
| 16 | Removing excavated materials (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 17 | S&F\\"as in repair\\" for 100 mm dia CI soil/Waste/vent pipes (sand cast) in any length with or without ears with cement joints, laid in trenches or in floor including dismantling / taking out of old pipe complete all as specified and directed |
| 18 | S&F for 150 mm dia CI soil/Waste/vent pipes (sand cast) in any length with or without ears with cement joints, laid in trenches or in floor including dismantling / taking out of old pipe complete all as specified and directed |
| 19 | S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 20 | S&F \\"in repair as\\" PVC (SWR) multi floor trap 75mm dia. outlet with grating including jointing with solvent cement complete all as specified and directed. |
| 21 | S&F \\"in repair as\\" 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed |
| 22 | S&F \\"in repair as\\" of CI soil/Waste/vent pipes (sand cast) in any length with or without ears with cement joints, fixed to wall of 100mm bore including dismantling / taking out of old pipe complete all as specified and directed. |
| 23 | M&L for plain concrete bed to drain pipes including forming cradles after they are laid and tested in cement concrete type C-2 1:3:6 (40mm graded stone) for 100 mm bore pipes complete all as specified and directed. |
| 24 | M&L for providing cement concrete type C-1, 1:3:6 (20 mm graded crushed stone aggregate) as in coping benching, bed plate, including necessary form work complete all as specified and directed. |
| 25 | M&L for rendering 15mm thick in CM 1:4 finished even and smooth without using extra cement on concrete surface complete all as specified and directed. |
| 26 | M&L for precast RCC type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in cover slabs, man holes covers and similar article including necessary form work complete all as specified and directed.(Note:- Reinforcement shall be measured and paid seperately under respective items ) |
| 27 | M&L for Providing reinforced cement concrete 1:2:4 type B-1, (using 20 mm graded crushed aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm, but n. exc 250Sq.cm with or without chamfered angles and flat, splayed, rounded or mitred tops making hole , cuttining etc for receiving wire, etc complete all as specified and directed |
| 28 | S&F of Mild Steel TMT bars 10 dia and over, cut to length bent to shape required including cranking bending etc, and binding with MS wire (annealed) n less that 0.90 mm dia complete all as specified and directed. |
| 29 | S&F Mild steel TMT 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 30 | S&F \\"as in repair\\" Mild steel round bars 10 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips confirming to Fe-410-W(Gde.E-250)quality-A or Fe290(Gde-E-165) complete all as specified and directed. |
| 31 | S&F \\"as in repair\\" of flat iron fillets for securing wire mesh etc. including all necessary drilling holes for bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 32 | S&F of PVC coated chain link fencing of mesh size 50 x 50 mm , 3 mm over all dia wire with 1.0 mm PVC coating fixed to any type of standards, rails, posts, straining bolts etc. complete all as specified and directed. |
| 33 | M&L for MS screw bolts (machine made) 10mm to 12 mm dia with hexangonal or squre head at one end screwd other or screwd end fitted with wishers and one hexogonal or square not exc 125mm long with 3 mm thick one washer complete all as specified and directed. |
| 34 | S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 290 Gde E-165, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed. |
| 35 | S&F \\"as in repair\\" Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed. each line wire to be measured |
| 36 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 37 | M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 38 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of motar 15 mm thick in cement mortar 1:6 for laying floor finished including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 39 | Taking down wooden / Aluminium / Iron / PVC chowkhats or frames with shutters (with out taking off shutter from frame) exc 1.5 sq. m and not exceeding 4 Sqm each. complete all as specified and directed. |
| 40 | Taking down wooden / Aluminium / Iron / PVC chowkhats or frames with shutters (with out taking off shutter from frame) not.exc 1.5 sq. m each complete all as specified and directed. |
| 41 | S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening complete all as specified and directed. |
| 42 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuckinside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain clour PVC sheet to be fitted in the M.S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed. |
| 43 | S&F for butt hinges 100 mm size medium weight cold rolled mild steel complete all as specifed and directed. |
| 44 | S&F for 150mm long anodised extruded aluminium alloy handles, fabricated type. complete all as specified and directed. |
| 45 | S&F 150mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 46 | S&F powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 47 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, door stopper, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 48 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking/sliding arrangement etc. complete all as specified and directed. |
| 49 | M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters / aluminium partions etc.complete all as specified and directed. |
| 50 | S&F \\"as in repair\\" anodised aluminium grill (anodised transparent or dyed to required shade acording to IS: 1868 with minimum anodic coating of grade AC 15) of approved esign/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and directed. |
| 51 | S&F for 5 mm thick figured glass, pin head type and glazing with oil putty / aluminium beading in square exc 0.50 Sqm each in each pane complete all as specified and directed. |
| 52 | S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square exc. 0.5 Sq.m. in each pane complete all as specified and directed. |
| 53 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples etc complete all as specified and directed. |
| 54 | S&F \\"as in repair\\" Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples etc complete all as specified and directed. |
| 55 | Supply and Laying of 15 mm outer dia. CPVC pipes SDR 11& Plain CPVC SDR 11 Fittings on wall/ceiling or laying in floors incl taking down of existing plumbing lines etc. complete all as specified and as directed. |
| 56 | Supply and Laying of 25 mm outer dia. CPVC pipes SDR 11& Plain CPVC SDR 11 Fittings on wall/ceiling or laying in floors including taking down of existing plumbing lines etc. complete all as specified and as directed. |
| 57 | S&F \\"as in repair\\" Brass chromium plated shower rose with shower arm of size125mm with swivel joints fixing to steel pipes complete all as specified and as directed. |
| 58 | S&F \\"as in repair\\" PVC flexible connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 59 | S&F \\"as in repair\\" 600x450 mm looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 60 | S&F \\"as in repair\\" 15mm bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 61 | S&F \\"as in repair\\" 15mm stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed bothends for iron pipe or for unions and fixed complete all as specified and directed. |
| 62 | S&F \\"as in repair\\" 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screws shanks and fly nuts complete all as specified and directed. |
| 63 | S&F \\"as in repair\\" Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including 32mm dia PVC waste pipe complete all as specified and directed. |
| 64 | S&F \\"as in repair\\" vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed complete all as specified and directed. |
| 65 | S&F \\"as in repair\\" vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding complete all as specified and directed. |
| 66 | S&F \\"as in repair\\" for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed. |
| 67 | S&F \\"as in repair\\" brass CP towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified and directed. |
| 68 | S&F \\"as in repair\\" Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs complete all as specified and directed. |
| 69 | S&F \\"as in repair\\" soap dish, chromium plated, fixed to plugs with chromium plated brass screws complete all as specfied and directed. |
| 70 | S&F \\"as in repair\\" toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 71 | S&F \\"as in repair\\" Plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 72 | S&F \\"as in repair\\" vitreous china urinals, bowl type, white (back or corner wall type) of size 465x355x265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement , including fixing urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed. |
| 73 | S&F \\"as in repair\\" Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 74 | S&F \\"as in repair\\" 15mm dia bib cock 2-way double handle with flange standard of CP any colour screwd for iron pipes and fixed complete all as specified and directed. |
| 75 | S&F \\"as in repair\\" 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender