Tender For Repair, Polishing And Painting Of Wooden And Steel Furniture At Af Station Suratgarh
Tender Value
45 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
12 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Polishing And Painting Of Wooden And Steel Furniture At Af Station Suratgarh
BOQ
| Sl. No. | Item Description |
| 1 | BOQ (REPAIR, POLISHING AND PAINTING OF WOODEN AND STEEL FURNITURE AT AF STATION SURATGARH) |
| 2 | Chair Dining:(FD-279) Taking out old unserviceable components as follows from Chair Dining and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge :- |
| 3 | Front legs |
| 4 | Rear legs |
| 5 | Front rails/ Side rails/ Back rails |
| 6 | Back rest |
| 7 | Stiffeners |
| 8 | New nylon buffers on legs. |
| 9 | Chair Easy:(FD-229) Taking out old unserviceable components as follows fromChair Easy and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge :- |
| 10 | Front legs |
| 11 | Rear legs |
| 12 | Side /Front / Back Rail |
| 13 | New nylon buffers on legs. |
| 14 | Chair Writing:(FD-280) Taking out old unserviceable components as follows from Chair Writing and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge :- |
| 15 | Front legs |
| 16 | Rear legs |
| 17 | Front / Side / Back rails |
| 18 | Back rest |
| 19 | Stiffeners |
| 20 | New nylon buffers on legs. |
| 21 | Material & Labour for cutting of old plastic cane and re-canning of chairs of any type with half round plastic cane 2 mm wide 0.4mm thick for seat and back and border with 3mm wide 0.5mm thick, finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing and as directed by Engr-in-charge. |
| 22 | Chair Wooden Bottom:(FD-285) Taking out old unserviceable components as follows from Chair and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge :- |
| 23 | Front legs |
| 24 | Rear legs |
| 25 | Side / Front / Back rails |
| 26 | Back rest |
| 27 | Stiffeners |
| 28 | Seat made of 6mm thick plywood commercial BWR grade. |
| 29 | New nylon buffers on legs. |
| 30 | Chair Dining JCO/ORs:(FD/MAP/II-05) Taking out old unserviceable components as follows from Chair Dining JCO/ORs and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge :- |
| 31 | Front legs |
| 32 | Rear legs |
| 33 | Front / Back / Side rails |
| 34 | Back rest |
| 35 | Stiffeners |
| 36 | PVC Seat 4mm thick with holes (as per sample kept in GE office) screwed with rails. |
| 37 | New nylon buffers on legs. |
| 38 | Chair Dining Officers:(FD/MAP/II-04) Taking out old unserviceable components as follows from Chair Dining Officers and supply & fixing New Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 39 | New back rest |
| 40 | New vertical stripsof back rest |
| 41 | New back rail of back rest |
| 42 | New front legs |
| 43 | New rear legs |
| 44 | New stiffner |
| 45 | New rails |
| 46 | New stopper fixed with main frame and legs. |
| 47 | 75mm thick 40 Density foam seat covered with coloured fabric as approved by GE. |
| 48 | New seat bottom of 12mm thick BWR Phenol bonded plywood . |
| 49 | New nylon buffers on legs. |
| 50 | Material & Labour for two coats of French polish of best quality on old surfaces after preparation. complete all as specified as shown on drawing and as directed by Engr-in-charge for the following items of furniture :- |
| 51 | Chair Dining |
| 52 | Chair Easy |
| 53 | Chair Writing |
| 54 | Chair wooden bottom without arms |
| 55 | Chair Dining JCO/ORs |
| 56 | Chair Dining Officers |
| 57 | Sofa set Five/Four seater :(FD-281,373, FD/MAP/II-02) Taking out old unserviceable components as follows from Sofa set 5/4 seater and S& F new Components as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 58 | New Seat Rails Right and left of Sofa set (Single Seater) |
| 59 | New Seat Rails Front and Back of Sofa set (Single Seater) |
| 60 | New Rails of back frame Top and bottom of Sofa set (Single Seater) |
| 61 | New Back and bottom support of Sofa set (Single Seater) |
| 62 | New long rails of seat front and back of Sofa set (Three Seater) |
| 63 | New long rails of Back frame Top and bottom of Sofa set (Three Seater) |
| 64 | New long Back and bottom support of Sofa set (Three Seater) |
| 65 | New legs of Sofa Single seater/Three seater |
| 66 | New Arms of Sofa set. |
| 67 | New bearers of Seat and Back rest of Sofa set. |
| 68 | Taking out old unserviceable foam cushion and S & F new cool foam cushion 32 Kg/cum density of size 580x560x100mm with superior quality tapestry cloth cover duly stiched at one end with openable zip & making good shape (Tapestry cloth not less than Rs.350/- per mtr as approved by GE). colour & pattern as approved by GE/Engr-in-Charge. |
| 69 | Material & Labour for polishing of two coats of french polish for all exposed surfaces of the Sofa Set 5 seater including cleaning and preparing the old surfaces complete all as specified and as shown on drgs and as directed. |
| 70 | Material & Labour for polishing of two coats of Melamin polish for all exposed surfaces of the Sofa Set 5 seater including cleaning and preparing the old surfaces complete all as specified and as shown on drgs and as directed. |
| 71 | do- but for Sofa set 4 seater. |
| 72 | Table Bed side:(FD/MAP/II-15) Taking out unserviceable components as follows from Table Bed side (MAP) and supply & fixing new components as per shape and size as existing made out of Ist class Hard wood Pre laminated particle board teak face and commercial plywood of approved make all as specified and as directed by Engr-in-Charge. |
| 73 | New top with PVC/ TW edging . |
| 74 | New Bottom portion of upper and lower drawers. |
| 75 | New Front portion of upper drawers with PVC/ TW edging .. |
| 76 | New Front portion of lower drawers with PVC/ TW edging . |
| 77 | New Sides of upper drawers. |
| 78 | New Sides of lower drawers. |
| 79 | New Hard wood runner of upper and lower drawers. |
| 80 | New Hard wood stopper of upper and lower drawers. |
| 81 | New Frame work made of 18 mm MS square pipe (18 Gauge) powder coated with black colour enamel paint. |
| 82 | New 18mm prelaminated particle board inside the top frame work. |
| 83 | New Handle of upper and lower drawers. |
| 84 | New rubber Shoes for legs. |
| 85 | Table Dressing Ladies with Stool:(FD/MAP/II-07) Taking out old unserviceable components as follows from Table Dressing Ladies with Stool and supply & fixing new components as per Shape and size as existing made out of well seasoned 1st class teak wood and 18mm thick pre laminated particle board teak face all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 86 | New looking mirror. |
| 87 | New Frame and back support of the mirror including back side 6 mm thick commercial plywood. |
| 88 | New Top made of 18mm thick pre-laminated particle board teak faced and providing 4mm thick Teakwood beading on all exposed sides. |
| 89 | New drawers providing 4mm thick Teakwood beading on all exposed sides and provided with stainless steel moving telescopy. |
| 90 | New shutter of doors providing 4mm thick Teakwood beading on all exposed sides fixed to the frame with SS piano hinges. |
| 91 | 50 mm Long 'D' shaped Stainless Steel handle. |
| 92 | Magnetic catcher for shutters. |
| 93 | Side of stool providing 4mm thick Teakwood beading on all exposed sides. |
| 94 | Openable shutter made out of 12 mm thick commercial plywood fitted with MS folding Handle. |
| 95 | 50 mm dia heavy duty revolving nylon wheel of stool. |
| 96 | 75 mm thick foam cushion 40 density covered with superior quality tapestry duly stiched on four sides making good shape (Tapestry cloth not less than Rs.350/- per mtr) colour & pattern as approved by GE/Engr-in-Charge. |
| 97 | Material & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. |
| 98 | Bin Linen Multipurpose: Taking out old unserviceable components as follows from Bin Linen Multipurpose and supply & fixing new components as per Shape and size as existing made out of well seasoned 1st class teak wood and 18mm thick pre laminated particle board teak face of make-Bhutan/Novopan/Archid all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 99 | New Top with 4mm thick Teakwood beading on all exposed sides. |
| 100 | New drawers with 4mm thick Teakwood beading on all exposed sides and provided with stainless steel moving telescopy. |
| 101 | New shutter with 4mm thick Teakwood beading on all exposed sides fixed to the frame with SS piano hinges. |
| 102 | 50 mm Lomg 'D' shaped Stainless Steel handle. |
| 103 | Magnetic catcher for shutters. |
| 104 | New partition of cupboard. |
| 105 | New 25X25 mm Hardwood stiffner |
| 106 | New Legs made of Hardwood. |
| 107 | Material & Labour for polishing of two coats of French polish of best quality to the wooden/ plywood surfaces after preparation of old surfaces as specified and as directed. |
| 108 | Teapoy:(FD-278) Taking out old unserviceable components as follows from Teapoy and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 109 | New Top made out of 18 mm thick pre-laminated particle board teak faced and providing Teakwood beading 4 mm thick all around the top |
| 110 | New Legs |
| 111 | New Long Rails |
| 112 | New Short Rails |
| 113 | Material & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. |
| 114 | Table Peg: (FD-277)Taking out old unserviceable components as follows from Table Peg and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 115 | New Top. |
| 116 | New Legs |
| 117 | New Long Rails |
| 118 | New Short Rails |
| 119 | Material & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. |
| 120 | Table Writing: (FD-249 & 275) Taking out old unserviceable components as follows from Table Writing and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 121 | New Top. |
| 122 | New Legs |
| 123 | New Top Rails |
| 124 | New Stiffners |
| 125 | New Drawers |
| 126 | New Shutter of cupboard providing CP Knobs and piyano hinges. |
| 127 | New 6 mm thick commercial ply on back of cupboards |
| 128 | Men & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. |
| 129 | Table Centre: (FD-274) Taking out old unserviceable components as follows from Table Centre and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 130 | New Top. |
| 131 | New Legs |
| 132 | New Long Rails/ Stiffner. |
| 133 | New Short Rails |
| 134 | Men & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. |
| 135 | Table 900 mm x 600 mm without drawers:(FD-284) Taking out old unserviceable components as follows from Table 900 x 600 mm without drawers and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge. |
| 136 | New Top. |
| 137 | New legs |
| 138 | New Short Rail |
| 139 | New Long Rails |
| 140 | New Short Stiffners |
| 141 | New Long Stiffners |
| 142 | Men & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. |
| 143 | Varandha chair: (FD-259) Material & Labour for cutting of unserviceable plastic cane and re-caning of Chair Varandha with half round plastic cane 4 mm wide, 0.5mm thick white colour for seat and back complete all as specified and as shown on drawing and as directed by Engr-in-charge. |
| 144 | Painting to frame of Chair varandha with white synthetic paint including preparationof surface after removing the old cane as specified and as directed by Engr-in-charge. |
| 145 | Almirah Large Steel with Shelves: (FD-1031) Taking out old unserviceable components as given below from Almirah large Steel and S & F new components in replacement as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge. |
| 146 | New GI lock of suitable size with 4 levers with duplicate keys . Make of locks as approved by GE/ Engr in Charge. |
| 147 | New Locking device . |
| 148 | New steel Handle cromium plated 150 mm. |
| 149 | New Steel legs made out of 1 mm thick MS Sheet. |
| 150 | New Shelves made out of 1 mm thick MS Sheet and Fixing in existing position with appropriate size MS clamps as directed. |
| 151 | Repair of loose doors by replacing unserviceable existing hinges, fittings (Nut & Bolts, Steel Screw/Revits) and adjustment for smooth functioning as specified. |
| 152 | M & L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. |
| 153 | Almirah Medium Steel with Shelves: (FD-1032) Taking out old unserviceable components as given below from Almirah Medium Steel and S & F new components in replacement as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge. |
| 154 | New GI locks suitable size with 4 levers with duplicate keys as per existing size and pattern. Make of locks as approved by GE/ Engr in Charge. |
| 155 | New Locking device as per existing type and as directed by Engineer in charge. |
| 156 | New steel Handle chromium plated 150 mm. |
| 157 | New Steel legs made out of 1 mm thick MS Sheet |
| 158 | New Shelves made out of 1 mm thick MS Sheet and Fixing in existing position with appropriate size MS clamps as directed. |
| 159 | Repair of loose doors by replacing unserviceable existing hinges, fittings (Nut & Bolts, Steel Screw/Revits) and adjustment for smooth functioning as specified. |
| 160 | M & L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. |
| 161 | Charpoy Folding: (FD-388(R)) M&L for taking out old unserviceable components as given below from Charpoy Folding and S & F New Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge. |
| 162 | New top made out of phenol bonded ply wood BWR commercial 12 mm thick of approved make size as existing in two piece including fixing to frmae with 08 Nos flat head nut and bolts |
| 163 | New side legs made of 25 dia 16 gauge MS conduit pipe including rivets and MS flats. |
| 164 | New middle legs made of 25 dia 16 gauge MS conduit pipe including rivets and MS flats. |
| 165 | New Stiffner made of 25 dia 16 gauge MS conduit pipe. |
| 166 | Removing the unserviceable rubber shoes and supply & fixing of new rubber/ PVC shoes of best quality |
| 167 | M&L for electric arc welding of broken joints of Charpoy folding wherever necessary. |
| 168 | Painting on entire frame of Charpoy folding after preparing the surface after removing rust, old paint, dirt etc. with OG colour enamel paint . |
| 169 | Locker Bedside Steel: (FD-257 & 1029) Taking out old unserviceable components as given below from Locker Bedside Steel and S & F New Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 170 | New steel Bow handle chromium plated 100 mm Heavy duty. |
| 171 | New Steel hanging Rod 20 mm dia CP conduit pipe of wall thickness not less than 1 mm |
| 172 | New Steel sockets 25 mm dia chromium plated with fixing steel screw. |
| 173 | Repair of loose doors by replacing unserviceable existing hinges, fittings and adjustment for smooth functioning as specified. |
| 174 | New MS hasp & staple 75 mm fixed with rivets to the shutters as specified. |
| 175 | New Steel Tower bolt 75 mm welded to the shutter as specified. |
| 176 | New Steel legs made out of 1 mm thick MS Sheet. |
| 177 | M & L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. |
| 178 | Book Case Steel: (FD-1028) Taking out old unserviceable components as given below from Book Case Steel and S & F New Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 179 | New GI locks 4 levers with duplicate keys. Make of locks as approved by GE/ Engr in Charge. |
| 180 | New steel bow Handle Chromium plated 100 mm. |
| 181 | New glass pane 3 mm thick Make-Modigurd/ Saint Gobin |
| 182 | Fixing of loose shutters in existing position with appropriate size clips and sliding roller as existing and making the sliding shutter for easy moving. |
| 183 | M & L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. |
| 184 | Charpoy MS Tube: Taking out old unserviceable components as given below from Charpoy MS Tube and S & F New Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 185 | New 12mm thick BWR phenol bonded commercial ply of size 1980 mm x 900 mm. |
| 186 | New 18mm both side prelaminated particle board of headboard of size 650 x 300 mm screwed to MS strip. |
| 187 | New rubber shoes of best quality. |
| 188 | M&L for electric arc welding of broken joints of Charpoy MS Tube wherever necessary. |
| 189 | Painting on entire metal portion of Charpoy MS Tube after preparing the surface after removing rust, old paint, dirt etc. with black colour enamel paint as per drawing and as directed by Engineer-in-Charge. |
| 190 | Table Dinning ORs: (FD-165) Taking out old unserviceable components as given below from Table Dinning ORs and S & F New Components in replacement as per Shape and size as exiisting. All Steel parts of 25 mm square tube 1.6 mm wall thickness.Rest all as specified and shown on drawing and as directed by Engr-in-Charge. |
| 191 | New legs. |
| 192 | New top long rails/ Stiffner. |
| 193 | New Hard rubber shoes for legs. |
| 194 | M & L painting to the frame with one coat of synthetic enamel paint after preparation of steel surface. |
| 195 | New top made out of 18 mm thick block board covered on top with 22 guage aluminium sheet, and fixed to frame with steel screw of appropriate size. |
| 196 | Table Office Clerk Steel : (FD-381 & 1004) Taking out old unserviceable components as given below from Table Office Clerk Steel and S & F New Components in replacement as per Shape and size as existing. All Steel parts made out of 25 mm square tube 1.6 mm wall thickness. Rest all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 197 | New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/ Novopan/Archid duly provided 4 mm thick TW beading alround the top duly polished with two coats of french polish. |
| 198 | New GI lock 4 lever with 2 keys. Make of locks as approved by GE/ Engr in Charge. |
| 199 | New legs/ Stiffner. |
| 200 | New top rails. |
| 201 | New drawer inluding MS channel made out of 1.0 mm thick PBI sheet . |
| 202 | New hard rubber shoes for legs. |
| 203 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray gun one coat of synthetic enamel paint OG, complete all as specified. |
| 204 | Table Office Offrs Steel: (FD-84 & 1003) Taking out old unserviceable components as given below from Table Offrs steel and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 205 | New top made of 18 mm thick pre-laminated particle board teak face duly provided 4 mm thick TW beading alround the top duly polished with two coats of french polish. Make-Bhutan board/ Novapan/Archid |
| 206 | New GI lock 4 lever with 2 keys. Make of locks as approved by GE/ Engr in Charge. |
| 207 | New legs/ Stiffner. |
| 208 | New top rails. |
| 209 | New Hard rubber shoes for legs. |
| 210 | New drawer inluding MS channel made out of 1.0 mm thick PBI sheet as per drg. |
| 211 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray gun one coat of synthetic enamel paint OG, complete all as specified. |
| 212 | Table Steel 900 x 600 x 760mm with drawer: (FD-1008) Taking out old unserviceable components as given below from Table Steel 900 x 600 x 760mm and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 213 | New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/ Novapan/Archid duly provided 4 mm thick TW beading alround the top duly polished with two coats of french polish. Make-Bhutan board/ Novapan/Archid. |
| 214 | New GI lock 4 lever with 2 keys. Make of locks as approved by GE/ Engr in Charge. |
| 215 | New legs made out of 25 mm square tube 1.6 mm wall thickness. |
| 216 | New drawer inluding MS channel made out of 1.0 mm thick PBI sheet as per drg. |
| 217 | New hard rubber shoes for legs. |
| 218 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified. |
| 219 | Table Steel 900 x 900 x 760mm: (FD-1009) Taking out old unserviceable components as given below from Table Steel 900 x 900 x 760mm and S & F New Components in replacement as per Shape and size as existing. All Steel parts made out of 25 mm square tube 1.6 mm wall thickness.Rest all as specified and shown on drawing and as directed by Engr-in-Charge |
| 220 | New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/ Novapan/Archid duly provided 4 mm thick TW beading alround the top duly polished with two coats of french polish. |
| 221 | New legs/ top rails/ Stiffners. |
| 222 | New hard rubber shoes for legs. |
| 223 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified. |
| 224 | Chair CB Steel with Arms: (FD-75(M)) Taking out old unserviceable components as given below from Chair CB Steel with Arms and S & F New components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 225 | New MS cleats of size 50 x 25 x 3 mm and welding of joints and cracks to frame. |
| 226 | Removing of existing paint by scraping with abrasive cloth and painting one coat with synthetic enamel paint OG on steel surfaces after preparation of surfaces complete all as specified shown in drawing or as directed by Engr-in-Charge. |
| 227 | New seat frame made out of well seasoned 1st class hard wood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5 mm thick. |
| 228 | New Back frame made out of well seasoned 1st class teak wood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5 mm thick. |
| 229 | New PVC cap |
| 230 | New hard rubber shoes. |
| 231 | New arms of well seasoned 1st class hard wood and applying two coats of French polish black . |
| 232 | Chair CB Steel without Arms: (FD-75(M)) Taking out old unserviceable components as given below from Chair CB Steel without Arms and S & F New components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 233 | New MS cleats of size 50 x 25 x 3 mm and welding of joints and cracks to frame. |
| 234 | Removing of existing paint by scraping with abrasive cloth and painting one coat with synthetic enamel paint OG on steel surfaces after preparation of surfaces complete all as specified shown in drawing or as directed by Engr-in-Charge. |
| 235 | New seat frame made out of well seasoned 1st class hard wood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5 mm thick. |
| 236 | New Back frame made out of well seasoned 1st class teak wood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5 mm thick. |
| 237 | New PVC cap |
| 238 | New hard rubber shoes. |
| 239 | Chair Varandha: (FD-359 & FD/MAP-II/06) Taking out old unserviceable components of Chair Varandha and S & F New Components in replacement as per Shape and size as exiisting all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 240 | New PVC seat and back ( both included) 4 mm thick (having weight not less than 1.85 kg) having grooves 90X10 mm 10 Nos on seat and back. |
| 241 | welding of broken joints on frame. |
| 242 | New Hard rubber shoes for legs. |
| 243 | Painting the entire frame with two coat of synthetic enamel white paint after preparation of steel surface removing rust, dirt etc. |
| 244 | Chair Easy Steel: (FD-121(M)) Taking out old unserviceable components of Chair Easy Steel and S & F New Components in replacement as per Shape and size as exiisting all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 245 | New legs/stiffners made out of 19 mm square steel pipe of 16 gauge and gas welding to the frame. |
| 246 | New seat made of polyurethene foam covered with rexin as per drawing and as directed. |
| 247 | New Back made of polyurethene foam covered with rexin as per drawing and as directed. |
| 248 | New Arms made out of 1st class HW shisham fixed on steel frame with steel screws as per drawing. |
| 249 | New Hard rubber shoes for legs. |
| 250 | M & L for welding to the entire frame and painting to the frame with one coat of synthetic enamel black paint after preparation of steel surface. |
| 251 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary of tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender