Tender For Construction Of Ladies Toilet At Tlm Office Building Satna, Rewa, Sidhi & Shahdol Including External / Internal Water Supply, Sanitation & Electrification, Etc.
Tender Value
7.87 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
40 days left
EMD
15758
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Satna → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ladies Toilet At Tlm Office Building Satna, Rewa, Sidhi & Shahdol Including External / Internal Water Supply, Sanitation & Electrification, Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Ladies Toilet at TLM office building Satna, Rewa, Sidhi & Shahdol including external / internal water supply, sanitation & electrification, etc. |
| 2 | 3011472, 2.6, Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 3 | 3011580, 4.1.2.3, Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate |
| 4 | 3011576, 4.1.1.3, Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-15 – Grade concrete |
| 5 | 3011777, 6.5.2 , Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement Mortar 1:6 (1 cement: 6 sand). |
| 6 | 3011532, 2.24, Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 7 | 3011537, 2.27.2, Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. |
| 8 | 3011694, 5.16.6, Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”)Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 |
| 9 | 3011642, 5.9.1, Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 10 | 3011643, 5.9.2.1 , Centering and shuttering in cluding strutting, propping etc. and removal of form for: Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. |
| 11 | 3011633, 5.1.1, Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete |
| 12 | 3011783, 6.7.2.2, Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in :Having 75 kg / cm2 average compressive strength. Cement mortar 1:6 (1 cement : 6 sand) |
| 13 | 3011790, 6.11, Extra for brick work in superstructure above floor two levelsfor each additional floor or part thereof respective item. (Rate - 2 % of respective item) |
| 14 | 3011635, 5.2.1, \\"Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and\\" string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete |
| 15 | 3011636, 5.3.1, Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete |
| 16 | 3011653, 5.9.3, Centering and shuttering in cluding strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 17 | 3011655, 5.9.5, Centering and shuttering in cluding strutting, propping etc. and removal of form for: Lintels, beams, girders, bressumers and cantilevers |
| 18 | 3011656, 5.9.6, Centering and shuttering in cluding strutting, propping etc. and removal of form for: Columns, P i l l a r s , Piers, Abutments,Posts and Struts. |
| 19 | 3013027, 13.8, 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) |
| 20 | 3013018, 13.2.2, 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 sand) |
| 21 | 3013020, 13.3.2, 20 mm cement plaster of mix : 1:6 (1 cement : 6 sand) |
| 22 | 3011947, 9.1.2 , Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Sal wood |
| 23 | 3012013, 9.18.2 , Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 24 | 3012232, 9.109.2 , Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16 mm |
| 25 | 3012234, 9.110.2 , Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 300x10 mm |
| 26 | 3011309, 9.113.1 , Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm |
| 27 | 3013078, 13.41, Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. |
| 28 | 3013092, 13.53, Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) |
| 29 | 3012071, 9.43.1 , Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. |
| 30 | 3012716, 11.5, Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete. |
| 31 | 3012715, 11.49, Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 32 | 3014444, 21.1.2.2, Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 33 | 3011464, 2.1, Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. |
| 34 | 3012697, 11.38.1 , Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick |
| 35 | 3012750, 11.72.3 , Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colourand pattern over 50mm thick compacted bed of stone dust, compacting and proper embedding/ laying of inter locking paver blocks into the bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including locking edges in 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer'sspecifications and direction of Engineer-in- Charge. 60 mm thick C.C. paver block of M-30 grade |
| 36 | 3014449, 21.3.1, Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 37 | 3013848, 18.6.2.2, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Concealed work including cutting chases and making good the walls etc...20 mm nominal outer dia .Pipes. |
| 38 | 3013847, 18.6.2.1, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Concealed work including cutting chases and making good the walls etc...15 mm nominal outer dia .Pipes. |
| 39 | 3013849, 18.6.2.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Concealed work including cutting chases and making good the walls etc.25 mm nominal outer dia .Pipes. |
| 40 | 3013853, 18.7.3, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work..25 mm nominal outer dia .Pipes. |
| 41 | 3014134, 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 42 | 3014046, 18.12.1.1, Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :..With C.I. wheel of approved quality (screwed end)..25 mm nominal bore |
| 43 | 3014139, 18.31, Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore. |
| 44 | 3013501, 17.8.1, Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, whiteP.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. |
| 45 | 3013486, 17.2.1, Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :..W.C. pan with ISI marked white solid plastic seat and lid |
| 46 | 3014244, 19.9.1.2, \\"Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With Sewer bricks conforming to IS : 4885\\" |
| 47 | 3013508, 17.11.2, \\"Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :..White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.\\" |
| 48 | 3013684, 17.58.2, Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 110 mm diameter |
| 49 | 3013739, 17.87, Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. |
| 50 | 3013712, 17.68.2, Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Rectangular shape 453x357mm |
| 51 | 3013735, 17.83.2, Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour...600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 52 | 3013697, 17.61, Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet |
| 53 | 3013727, 17.78.1, Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia |
| 54 | 3014215, 19.4.1, Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD(min. wall thickness 3.2mm) |
| 55 | 3014216, 19.4.2, 160 mm diameter OD(min. wall thickness 4.0mm) |
| 56 | 3000163, 56a NSOR, Wiring for the following light points with 1.5 Sq. mm PVC insulated copper conductor ( Finolex, Havells, Anchor or equivalent) 650 Volts grade standard wire in concealed 25 mm dia 2 mm thick rigid PVC pipe of approved make i/c switches, lamp holder, Ceiling rose (Anchor, Havells or equivalent make) , GI Box/ wooden box and all other required fittings & fixtures of approved make including providing 5 Amp grid plate (Anchor, Havells or equivalent ) complete. The work include cost of all material, T&P, labour, making grooves and after the work done, to make the wall & other structural components good to the desired finish complete as per direction of Engineer in charge. short point upto 3 m |
| 57 | 3000164, 56b NSOR, Wiring for the following light points with 1.5 Sq. mm PVC insulated copper conductor ( Finolex, Havells, Anchor or equivalent) 650 Volts grade standard wire in concealed 25 mm dia 2 mm thick rigid PVC pipe of approved make i/c switches, lamp holder, Ceiling rose (Anchor, Havells or equivalent make) , GI Box/ wooden box and all other required fittings & fixtures of approved make including providing 5 Amp grid plate (Anchor, Havells or equivalent ) complete. The work include cost of all material, T&P, labour, making grooves and after the work done, to make the wall & other structural components good to the desired finish complete as per direction of Engineer in charge. Medium point 3 to 6 metres |
| 58 | 3000168, 58b NSOR, Wiring for the fan/ exhaust fan / call bell points with 1.5 Sq. mm PVC insulated copper conductor ( Finolex, Havells, Anchor or equivalent) 650 Volts grade standard wire in concealed 25 mm dia, 2 mm thick rigid PVC pipe of approved make i/c switches, , Ceiling rose (Anchor, Havells or equivalent make) , GI / wooden box and all other required fittings & fixtures of approved make including providing 5 Amp grid plate (Anchor, Havells or equivalent ) complete. The work include cost of all material, T&P, tax, transportation etc., labour, making grooves and after the work done, to make the wall & other structural components good to the desired finish complete as per direction of Engineer in charge. Medium point 3 to 6 metres |
| 59 | 3000179, 62c NSOR, \\"Wiring for circuit wiring with PVC insulated copper conductor of Finolex, Havells, Anchor or equivelant make in rigid PVC Conduit 25 mm dia 2 mm thick of approved make with bare copper earth conductor of suitable size and all other required fittings of approved make including cost of all material, T&P, taxes, transportation etc., labour and making good the surfaces to the smooth finish after completion of the work as per direction of Engineer in charge. 2x4 Sqmm\\" |
| 60 | 3000200, 72b NSOR, \\"Supplying & fixing of LED Bulb of Philips, Havells, Bajaj, Crompton or eqivalent make including fixing in position etc. as per direction of Engineer-in-Charge.(b) 5 watt\\" |
| 61 | 3000195, 68 NSOR, Providing & Fixing wall mounting Fresh Air Fan of premium quality plastic body and frame conforming to BEE standards and 5 star rating for energy saving of approved make, Bajaj, Havells, Crompton or equivalent make with motor,mounting frame, blades etc.250mm sweep, 400 to 500 rpm,including fitting and making all required connection, T&P,material,taxes etc.complete as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 40 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 41 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender