Tender For Construction Of Compound Wall And Toilet Ward 1 Karavilai Amman Covil Near In Villukuri Town Panchayat.
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
0 days left
EMD
9900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Compound Wall And Toilet Ward 1 Karavilai Amman Covil Near In Villukuri Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification |
| 2 | Plain Cement concrete 1:4:8 (one cement, four sand and eight aggregates) using 40mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS |
| 3 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best III Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 4 | Plastering in cement mortar 1:5 one part of cement five r part of M sand ) using 12mm thick including cost and conveyance of all materials and labour charges etc., complete as per standard specification |
| 5 | Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened wboarding laid over( silver oak joists ) spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. |
| 6 | Supplying , fabricating and placing in position of steel reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the department officer including cost of steel cutting, bending, placing in position and binding with binding wire and all labours charges for cutting, bending, tying and placing in position etc., complete TNDS No : 97 |
| 7 | Cement concrete Using 1:2:4 mix ( One cement two sand and four aggregates) using 20 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications.as per TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII |
| 8 | Providing abd fixing bitumen tar pad including cost and conveyance of expansion joints shallimar pad and jointing seal lands anf fixing them in positison etc., complete as per standard specification |
| 9 | Reinforcement cement Concrete 1:1½:3 Mix (one part cement, One and half part sand and three part of aggrigate) using 20 mm size ISS HBG metal for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc. complete. Complying with std. specifications. |
| 10 | Supply and fixing ceramic tiles in all floors over the base layer of cement mortar 1:3 ( one cement three M sand ) 20mm thick pointed with white cement at 0.40 kg/m2 including finishing the joints etc., as per standard specification |
| 11 | Dadooing walls wiyh Glazed tiles of 150mm×150mm×6mm size of approved make and quality and colour set in cement mortar 1:2 ( one part of cement two part of Plastering P sand ) over 12 mm base layer plastering and pointing with white cement neatly as directed |
| 12 | Fabricating supplying and fixing in position of SOLID PVC DOORS with frames of different size as per the specification viven below of 40 mm×58mm×2.5mm +/- 0.3 mm thick having multichamber cross section and duly reinforced tie rod at the bottom and nessery weather seal etc., and PVC door shuttering made out of extrued plastic section 60mm×24mm size in the configuration of 200 mm×200mm×1mm with tongue and groove section for panel etc., with necessary holdfasts, rubber beeding, furtiture fitting, locking arrangement etc., complete as per Specification |
| 13 | Supply and fixing in position best quality of approved make indian water closet of size 580×440 mm with all accessories such as P trap connecting to IS 2556 with sand cusion and forming flooring alround the closet using 40mm leveling the top to be required slop and including necessary internal connection and outlet and making the distribution potion potaion to orginal condition without leakage etc., including labour charges for fixing etc., complete |
| 14 | Supplying and fixing in position best quality of approved make wash hand basin of size 550×440 mm with all accessary such as cast iron brackets, including cost of 15 mmØ brass nipple 15 mm nylan connection etc., including fixing the wash basin etc. completly as per standard specification |
| 15 | Supply and fabrication & fixing in position of steel door of size 0.90×2.10 the outer frame will be 25×25×3mm angles the side frame with out bars and ms sheets 1.60 nn thick 29 gauge ms sheet necessary hinges , tower bars, etc., completely as per standard specification |
| 16 | Supplying and fixing of 1200 mm (48'') AC cealing fan complete with stepped electronic 300 W regulator with 300mm down rod on the existing clamp |
| 17 | Supply anf fixing of single box type compact flourescent tube fitting with copper choke and contenser with TW round block on wall PVC unsheathed copper leads from terminals to the fitting tube light |
| 18 | Supply and fixing of 20W LED fitting with LED ( M- 1273 ) |
| 19 | Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD 127. TW |
| 20 | Providing and fixing in position of PVC rain water down fall 110 mm dia pipe with necessary shoes bends other specials clamp screw nails teak wood plug including of all materials etc., as per standard specification |
| 21 | Supply anf fixing of stainless steel sink ( 600×450×200) with best stainless steel sink of approved brand and quality including cost of all materials and labour charges etc., as per standard specicication |
| 22 | Supply and delivery of following PVC /GI pipes and specials including Labour Charges |
| 23 | 63mm PVC Pipe |
| 24 | 63mm PVC Elbow |
| 25 | 32mm PVC Pipe |
| 26 | 32mm PVC Elbow |
| 27 | 32mm GI Pipe |
| 28 | 25mm G.M Valve |
| 29 | Supply and delivery and fixing of 1000 litre HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc. (TWAD schedule of rate 2024- 2025) |
| 30 | Special design art work with first class quality enamal paint including wall putting priming coat extra complete and all other incidential charges if any as per standard Specification |
| 31 | Painting two coat on new iron works with best synthetic enamal paint of approved colour and quality including all cost and conveyance of all material and labour charges etc., as per standard specification. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender