Tender For Construction Work For Flooring, Windows, And Doors In The Classrooms Of Vrindavan Lal Jain Ramsahay Rawat Educational College, Located Near Gauna Village (Near Narahat) In Madawara Development Block
Tender Value
6.75 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
16 days left
EMD
13500
Bank guarantee accepted
Document Fee
766
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lalitpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work For Flooring, Windows, And Doors In The Classrooms Of Vrindavan Lal Jain Ramsahay Rawat Educational College, Located Near Gauna Village (Near Narahat) In Madawara Development Block
BOQ
| Sl. No. | Item Description |
| 1 | 14.2 Fixing chowkhats in existing opening including embedding chowkhatsin floors or walls cutting masonry for holdfasts, embedding hold fasts incement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size),painting two coats of approved wood preservative to sides of chowkhatsand making good the damages to walls and floors as requiredcomplete,including disposal of rubbish to the dumping ground, all complete as perdirection of Engineer-in-Charge.14.2.1 Door chowkhats each 1782.55 |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces ofshutters. 3086.10 |
| 3 | Providing and fixing double glazed hermetically sealed glazing inaluminium windows, ventilators and partition etc. with 6 mm thick clearfloat glass both side, having 12 mm air gap, including providing EPDMgasket, perforated aluminium spacers, desiccants, sealant (Both primaryand secondary sealant) etc. as per specifications, drawings and directionof Engineer-in-charge complete. 4997.70 |
| 4 | 52 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardenermix : 2 graded stone aggregate 6 mm nominal size) by volume, hardeningcompound mixed @ 2 litre per 50 kg of cement or as per manufacturer'sspecifications. This includes cost of cement slurry, but excluding thecost of nosing of steps etc. complete |
| 5 | 12 mm cement plaster of mix 13.4.1 1:4 (1 cement: 4 coarse sand) sqm 357.35 |
| 6 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 7 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 8 | Sign Board |
| 9 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 10 | LED Batten Light 18-22 watt supplying installaltion testing & commissioning of led surface mounted batten light of following body material and consrution as per IS 10322 with driver as per the requiredment with driver efficiency 85% operating voltage AC 140-270 volt |
| 11 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 12 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender