Power Boards / Undertakings / PSU Closing in 6 days TDR #57528666

Tender For Construction Of 220 Kv Line Bays For Bus Bar System And Allied Civil Works At 220 Kv S/S Butari.

Issued by Boards / Undertakings / PSU · Amritsar, Punjab
Tender Value
99.33 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
6 days left
EMD
1.98 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of 220 Kv Line Bays For Bus Bar System And Allied Civil Works At 220 Kv S/S Butari.

BOQ

Name of Work:- Const. of 220 kV Line Bays for bus bar system and allied civil works at 220 kV S/S Butari.
Sl. No. Item Description
1Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres.
2Dismantling brick work tile, masonry or tile lining In cement
3Dismantling concrete Reinforced cement concrete
4Scraping Bricks dismantled from brick work in limeor cement.
5Removing doors and windows together with the dismantling of walls Doors
6Removing doors and windows together with the dismantling of walls Windows
7Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutters and down pipes.
8Add for roof trusses of iron or wood, (rafters, purling etc.) in case of item Nos. 8.10 and 8.11.
9Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base.
10Shuttering for faces of concrete foundations and foundationbeam & plinth beam (vertical or battering)
11Centering and shuttering for columns (Square or rectangularor poly gonal in plain)
12Cement Concrete 1:6:12 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)
13Cement concrete 1:5:10 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
14Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
15Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type
16Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
17Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure .
18Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot andsanded
19First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
20First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth
21First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.
22115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth
23Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
24Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
2512.5 mm thick cement plaster 1:3
2612.5 mm thick cement plaster 1:4
2712.5 mm thick cement plaster 1:5
2812.5 mm thick cement plaster 1:6
2920 mm thick cement plaster 1:4 in two coat work
3020mm thick cement plaster 1:5 in two coat work
31Applying priming coat with metal primer on new steel or iron work including preparation of surface.
32Painting two or more coats with aluminumpaint to give an even shade excluding primingcoat
33Painting two or more coats with anticorrosivebitumastic Paint to give an even shade
34Steel work fixed independently without connecting plates including cutting hoisting and fixing in position FLATS (Labour Rate)
35Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects. Above 20 mm dia bars (Labour Rate)
36Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete. (Labour Rate)
37Welding by gas or by electric plant, including carriage to and from workshop etc.
38Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications
39Brick on end edging Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications
40Boring for hand-pump in clay fitting strainer and pipe. Above 75mm dia bore but not exceeding 100mm. From 0 to 15 m.
41Boring for hand-pump in clay fitting strainer and pipe. Above 75mm dia bore but not exceeding 100mm. Exceeding 15 m but upto 30 m.
42Providing and fixing in position gratings 150mm x 150mm for gully trap. H.C.I. grating including painting with black bitumastic superior paint ofapproved manufacture three coats.
43Providing & Fixing of 3BHP 3 phase NON Clog Pump crompton make
44Providing and Fixing Template along with foundation bolts as per drawing
45Cable Racks of varios sizes
46Providing and Fixing Angle iron Nozzing 50x50x3 mm for cable trenches
47Suppling and Hoisting of Ferro Cement Trench Covers of size 3'4\\" x1'6\\" T-p type
48Suppling and Hoisting of Ferro Cement Trench Covers of size 2'8\\" x 1'6\\" T-1 and T-2 Type
49Suppling and Hoisting of Ferro Cement Trench Cover 2'2\\" x2'2\\" T-3 type
50Suppling and Hoisting of Ferro Cement Trench Covers of size 1'9\\" x 2'6\\" T-4 Type
51Suppling and fixing of MS angle iron posts of various sizes and shapes as per PSTCL approved Drg.
52P & F of barbed wire fencing consisting of glavanised steel barbed wire having dia 2.24mm( 2 Ply) barbed with 4 points as per IS 278/1962 i/c all fittings such as U clamp tighting nuts and bolts unrolling and strching complete.
53P&F of GI wire netting mesh of 12 gauge 50 x 50 mesh 180cms. High fastened with 4 nos ms wire rope 6/7 strand 1/16\\" dia each complete in all respects as per drg no. HW/TB-5635R-2 and Arch Drg No. 8 Rs/ Job No. 112/S and conforming to IS- 2721/1974 and 3459/1977 respectively
54P/F of Steel gate type G-2 5.80 mtr wide as per Arch. Drawing
55Prov./Fixing top post lantern (Gate Light) lantern of Crompton or Havells Make
56Laying PCC Flooring Cement Concrete 1:5:10 with crushed stone and Stone Aggregate as per AOR
57Cement Slurry of cement to sand ratio 1:6 with cement content not less than 150kg/100 sqm
58Suppling and Spreading of Gravel as per AOR
59Desposal of debries as per Aor
60Recovery of bricks
61Recovery of steel scrap
62Recovery of brick bat
63Recovery of door
64Recovery of steel truss
65Recovery of window/ventilators
66Extra Carriage of material- Cement
67Extra Carriage of material- Steel
68Extra Carriage of material- Fine sand
69Extra Carriage of materials & diff. of rates of material- Coarse Aggregate 12/13.2 mm
70Extra Carriage of materials & diff. of rates of material- Bricks
71Extra Carriage of materials & diff. of rates of material- Coarse Aggregate 10/11.2 mm
72Extra Carriage of materials & diff. of rates of material- Coarse Sand
73Extra Carriage of materials & diff. of rates of material- Stone metal 40mm
74Extra Carriage of materials & diff. of rates of material- Stone metal 63mm Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57528666
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 99.33 Lakhs
LAST DATE 01-10-2026
Authority
Authority Name Punjab State Transmission Corporation Limited
Work Description Tender for Construction Of 220 Kv Line Bays For Bus Bar System And Allied Civil Works At 220 Kv S/S Butari.
Basic Detail
Tender No CWJ/T-12/2026-27
Bidding Type Tender
Location
City Amritsar
State Punjab
Key Dates
Publish Date 15 Sep 2026
Submission Date 01 Oct 2026
Open Date 05 Oct 2026
Finance
Tender Value 99.33 Lakhs
Tender Fee Ref. Documents
EMD 1.98 Lakhs
Exemption Available
Document List
85ba8b81-930c-465a-9690-d9287f377816.html
BOQ_357063.xls
DNIT.pdf
TC012.pdf
TCAR.pdf
TECHSPEC1.pdf
TECHSPEC2.pdf
Tendernotice_1 (20).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Oct 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

85ba8b81-930c-465a-9690-d9287f377816.html

xls

BOQ_357063.xls

pdf

DNIT.pdf

pdf

TC012.pdf

pdf

TCAR.pdf

pdf

TECHSPEC1.pdf

pdf

TECHSPEC2.pdf

pdf

Tendernotice_1 (20).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders