Tender For Providing Lift And Genset Arrangements For The Work Of Construction Of Additional For District Police Office Building With Development Works At Erode In Erode District.
Tender Value
47.01 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
10 days left
EMD
33600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Lift And Genset Arrangements For The Work Of Construction Of Additional For District Police Office Building With Development Works At Erode In Erode District.
BOQ
| Sl. No. | Item Description |
| 1 | LF-PL-13P-G+3: Supply, Erection and Commissioning of 1No of Passengers lift (13 Persons - 884 Kgs.) For (G+3) at site according to the following specification Number of lifts / Type of lift: ONE / MACHINEROOMLESS ELEVATOR – PASSENGER Load / Speed : 13 Persons (884Kags.) / 1.0 Mtr. Per Second Drive: V3F Drive Travel / PIT / HEADROOM : 15.4m Travel / PIT1600mm / HEADROOM 1200mm Number of floors : 4 (GROUND + 3 UPPER FLOORS) |
| 2 | EL-EX-LTUG-S&D-3.5C25: Supplying and delivery of 3.5 core 25 sq.mm. PVC aluminium armoured LTUG cable (PVC aluminium armoured LTUG 1100v grade) with isi mark including cost of cable and conveying to the site of work etc., all complete and as directed by the departmental officers. [the brand and quality of the UG cable should be got approved from the executive engineer before use]. |
| 3 | EL-EX-Br CG-S&D-3.5C25: Supplying and delivery of 3.5 core 25 sq.mm. brass cable gland suitable for 3.5 core 25 sq.mm core sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete as per relevant standard specification and as directed by the departmental officers. (The brand and quality should be got approved from the EE before use) |
| 4 | EL-EX-ET-S&D-3.5C25: Supplying and delevery cable end termination of 3.5 core 25 sq.mm. PVC LTUG Aluminium armoured cable with necessary aiuminium cable sockets by crimping etc.all complete as per relevant standard specification and as directed by the departmental officers. (The brand and quality should be got approved from the EE before use) |
| 5 | EL-V DB-4w MCB-63A,IFSupply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only etc., all complete as per relevant standard specification and as directed by the departmental officers. (The brand and quality should be got approved from the EE before use) |
| 6 | EL-SPN-8wMCB-40A DP MCBOWSupply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. etc., all complete as per relevant standard specification and as directed by the departmental officers. (The brand and quality should be got approved from the EE before use) |
| 7 | EL-IN-EP-CP: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet for 5 amps. 5 pin plug socket point at convenient places including circuit mains, cost of all materials, specials, etc., all complete |
| 8 | EL-IN-EF-BH:Supplying and fixing of water tight Bulk head fitting suitable for 12Watts LED with guard, including ncessary connections, cost of materials etc., all complete and as directed by the departmental officers. |
| 9 | EL-IN-LED.F-LBSupplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use)EL-IN-EF-12W:b) 12 watts LED bulb |
| 10 | EL-IN-EF-TNBP: Providing Earthing station using 2.0m of 40mm dia B class G.I pipe electrode as per PWD (TNBP) and supplying and laying of 8 SWG GI wire including earth work excavation, brick work excavation , brick work in cement mortar, plastering, RCC cover slab, G.I wire 0.50 Kg, 20 Kg of charcoal, 9Kg of salt, including cost of all materials etc. |
| 11 | EL-IN-WR-2x2.5m2: Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990, 1.1. k.v. grade cable in fully concealed 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete. |
| 12 | EL-IN-EP-SLP: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet for Stair case light point controlled by 5 amps flush type switch including circuit mains cost of all materials, specials etc., all complete. |
| 13 | Supply and Run of 1 of No.8 SWG copper wire for earth connection with necessary ‘U’ Nails, etc... including cost of all materials etc.. all complete. |
| 14 | Supply and Run of 1 of No.8 SWG copper wire in suitable 19 mm PVC rigid pipe on wall / floor / ground for earth connection with necessary TW plug 38mm x 25 mm x 19 mm, Conduit saddles 19 mm,Brass Screws (40 mm) etc.. all complete. |
| 15 | GS-W AMF-DG-100 KVA: Supply, erection, testing and commissioning of 100 KVA Diesel Generator set with Auto Main Failure (AMF) panel of approved makes like (Kirloskar / equivalent) as per the new CPCB norms complete with all accessories like engine, alternator, batteries with leads, control panel, base frame, antivibration mounts, residential silencer, 200 litres fuel tank, intake and exhaust piping, fuel oil motor operated pump, other miscellaneous accessories for the total set including test trial run at load for 8 hours. (Including Supply of Diesel for Test run and consumable oil etc., contractor scope.,) necessary control wiring for battery charges, annunciation etc., as per specification |
| 16 | EL-EX-LTUG-S&D-3.5C185: Supplying and delivery of 3.5 core 185 sq.mm. brass cable PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete |
| 17 | EL-EX-Br CG-S&D-3.5C185:Supplying and delivery of 3.5 core 185 sq.mm. brass cable gland suitable for 3.5 core 185 sq.mm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs etc., |
| 18 | EL-EX-ET-S&D-3.5C185 : Supplying and delevery cable end termination of 3.5 core 185 sq.mm. PVC LTUG Aluminium armoured cable with necessary aiuminium cable sockets by crimping etc. |
| 19 | EL-IN-EP-Cu: Plate earthing with copper plate of size 600 x 600 x 3mm as per the ISI specification with an earth electrode of 2.1 m. Class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonary work and with 38mm RCC cover slab for brick masonary etc., all complete |
| 20 | GS-CEIG-DG-SC:APPROVAL FROM CEIG / CEA: Preparation of necessary drawings for DG sets for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from Them for commissioning the DG set (This building is fed by HT power supply) etc., all complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender