Tender For Renovation Works Of Old & New Office Building Of Hll Life Care Limited At Sector -62, Noida (U.P)
Tender Value
1.22 Crore
Estimated cost
Bid Submission
05 Oct 2026
0 days left
EMD
2.44 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Works Of Old & New Office Building Of Hll Life Care Limited At Sector -62, Noida (U.P)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift |
| 3 | In-filling / sealing of joint between RCC lintel cum sunshade and wall (on external side) in all floors by pushing in Grout RW/equivalent in paste form and coving 20 mm x 20 mm after applying a coat of Zycosil/equivalent & zycoprime/equivalent solution before cement plastering of top, bottomand sides of RCC sunshade. |
| 4 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative(internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. |
| 5 | For vertical surface two coats @ 0.70 kg per sqm per coat |
| 6 | For horizontal surface one coat @1.10 kg per sqm. |
| 7 | Retrofitting of existing interlocking concrete paver blocks by lifting, re-laying, and replacing damaged paver blocks of any shape, size, design, colour, and pattern, to the required line, level, grade, and curvature, over and including a 50 mm thick compacted coarse sand bedding. The item includes supplying and laying coarse sand for bedding, replacing damaged paver blocks wherever required, maintaining the proper slope to ensure no water stagnation, filling joints with fine sand, compaction, dressing, and all incidental works necessary to complete the work, as directed by the Engineer-in-Charge. |
| 8 | Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost) |
| 9 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 10 | Providing and fixing in position pre-cast R.C.C. manhole cover (plain or grated) and frame of required shape and approved quality EHD - 35 Circular shape 560 mm internal dia |
| 11 | Supply instollation of Earthing Chamber Cover as per pre define level complete work |
| 12 | Providing and constructing RCC/CC saucer drain having 80 mm thick concrete section in M25 grade concrete with smooth finished surface, including necessary excavation, compaction of bed, shuttering, reinforcement (if specified), jointing, curing, and complete |
| 13 | Providing and laying alkali-resistant fiberglass mesh 145 GSM heavy-duty mesh Crack repair mesh tape 4–6 inch embedded in External plaster/crack removal layer complete |
| 14 | Providing and fixing at all height false ceiling of 4 mm thick phenol bonded Bamboo Mat board (595x595 mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 mm c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64 mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-incharge. |
| 15 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global whitecolor tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece. |
| 16 | Providing and fixing internal wall panels on Light gauge steel frame work with 12.5 mm thick gypsum plaster board conforming IS 2095:2011 fixed on cement board as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60 cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately Cement Bonded particle board 8 mm (Termite, Fire & Moisture Resistance), as per IS:14276 : 1995 |
| 17 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 18 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides |
| 19 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make |
| 20 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 75 mm average thickness |
| 21 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specificationand also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin- charge and as per manufacturer’s specification, with all 4 sides tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 22 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 23 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 24 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 25 | Providing and fixing toilet paper holder : C.P. brass |
| 26 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 27 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 28 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 29 | Providing and fixing SS towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 30 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 31 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore |
| 32 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe - 40 mm dia |
| 33 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 34 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 35 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm. |
| 36 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm |
| 37 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm |
| 38 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 39 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 40 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 41 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 42 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) |
| 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 44 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 45 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 46 | Finishing walls with textured exterior/interior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. |
| 47 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 48 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and wherever required to achieve even shade and colour.manufacture, including applying additional coats Two coats |
| 49 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge |
| 50 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primaryand secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 51 | Providing and fixing stainless steel patch lock for frameless toughened glass door of 10–12 mm thickness, including lock body, floor strike box, keys, necessary fittings, screws, and all accessories complete. The lock shall be fixed to glass door patch fitting and installed as per manufacturer recommendations and site requirements, complete in all respects |
| 52 | Providing and fixing 600 mm long SS-304 glass door pull handle, back-to-back type with satin finish, suitable for 10–12 mm toughened glass door including all fittings and fixing complete |
| 53 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 54 | Providing & Applying weather proof sealant on outer joints of approved make confirming to IS & directed by Engineer-in-charge. Sealant 25 mm x10 mm at joints |
| 55 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width |
| 56 | Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50 mm x 50 mm hard wood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge. 12 mm thickness |
| 57 | Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. |
| 58 | Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. |
| 59 | Providing and fixing 14-inch high illuminated (medium LED/redium) digit signage for HLL Infra Tech Services Limited (HITES), HLL Lifecare Limited, and Hindustan Latex Family Planning Promotion Trust (HLFPPT). I’ll provide it digit-wise, including material, fabrication, lighting, installation, rate praposed digit wise. |
| 60 | Providing and fixing 3.0 mm thick commercial grade PVC Vinyl Flooring of approved brand and colour, laid over smooth, levelled and prepared cementitious subfloor using manufacturer-recommended adhesive. The work includes cleaning, primer if required, cutting, laying, heat welded joints, finishing edges, and making good all around complete as per manufacturer guidelines and direction of the Engineer-in-Charge. |
| 61 | Providing and fixing Horizontal Venetian Blinds with aluminum / wooden slats, complete with tilt and lift mechanism, bottom rail, end caps, and mounting hardware. Includes labor for precise leveling and alignment. |
| 62 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 63 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 64 | “Providing, supplying and fixing chromium plated brass (CP) faucet of approved make, 15 mm dia, complete with all fittings, unions, washers, nuts, and accessories including connection to water supply line, testing and commissioning, as per drawings and instructions of the Engineer-in-Charge.” |
| 65 | 1. Inspection and Surface PreparationThorough inspection of existing structural glazing for cracks, gaps, loose panels, and areas of water leakage.Cleaning of the glazing surface using suitable cleaning agents; removal of dust, dirt, algae, and old sealant to ensure proper adhesion of waterproofing sealant.2. Repair / Replacement of Glazing PanelsSupply, cutting, trimming, and fixing of damaged glazing panels or sections to align with the existing façade.3. Primer / Adhesion Promoter ApplicationApplication of a suitable primer or adhesion promoter on glazing surfaces to enhance bond strength of waterproofing sealant.4. Waterproofing Sealant ApplicationFilling all joints, gaps, and cracks using high-quality waterproofing sealant compatible with glazing.Ensuring uniform application, smooth finishing, and proper curing.5. Finishing and CleaningRemoval of excess sealant, ensuring neat joint lines.Cleaning of entire façade surface after completion of work. |
| 66 | MODULAR FURNITURE |
| 67 | Manufacturing, providing and placing in position machine made factory assembled workstation of approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing Hybrid Panel based Workstations with following specifications:Frame Work, Partition and Cable management : Frame work shall consist of main spine and return spine of aluminium extruded section of minimum thickness of 1.2 mm. The overall thinkness of Panel base System should be minimum 60-70 mm.The thickness of main spine partition panel should be minimum 60-70 mm and & Return spine partition panel should be minimum 25-30 mm. The panel will be hollow inside to accommodate wiring for electrical/data and outer frame of panel should be made of extruded aluminium.The panel shall be made up of 3 mm thick MDF both sides of the wooden frame to create the hollow for the wire management. The panel outer aluminium frame is designed in such a way that it can be easily slide in to the columns/ Connectors by means of stacking one over the other. Horizontal race way should be 150-170 mm height aluminium profile. There shall be complete cable management arrangement with openable raceway above/ below worktop with provision for fitting electrical/data switches and holes for passing cable.Panel Finishes : Finishes of panel above the worktop can be fabric pinup/fabric/laminate + Glass/metal writable marker board or single finish tile with raceway on main spine. Finishes of main spine panel below the worktop the hollow panel should be made of MDF tile and 0.5mm thick steel sheet pasted on MDF which is powder coated with EPC finish 80-90 microns for durability on the inside as well on the outside. Raceway can be provided above/below the worktop.Connectors/ Brackets: End Post: Aluminium 60-70 mm width – 1180-1220 mm height.Two way post: Aluminium 30-70 mm width –1180-1220 mm height.Three way post: Aluminium 30-70 mm width –1180-1220 mm height.Four way post: Aluminium 30-70 mm width – 1180-1220 mm height.Brackets: Table top supported with 50-60mm width steel bracket.Table top to table top connector: 150-170 mm Width x 120-140 mm Depth width connector.Worktop :Worktop made of 25mm thick E-1 grade particle board finished with 2mm ABS edge banding. E1 grade laminate with zero urea formaldehyde emissions ( |
| 68 | Manufacturing, providing and Placing Mid Back revolving Visitor chairs for Cabin) of approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing Mid Back chairs for Cabin-2 (PS). The seat is made up of 12mm thick hot pressed plywood measured covered with ABS back and The Back is made up of injection molded glass filled polypropylene & upholstered using Net fabric with high tenacity, while the seat has high resilience polyurethane foam is molded with density approx... 55+/-2 kg/m3 and hardness 16 ± 2 kgf . The chair should be provided with the armrest having an Up-Down adjustment of approx. 8 ± 0.5cm which is provided in armrest structure along with 4 D movement, armrests top has an integrated layer of Thermoplastic Elastomer (TPE) to give padding to them. The chair should have a specially designed Lumbar support consists of polypropylene pad. The Height of Lumbar pad can be adjusted up and down using the sliding space given. The chair is provided with weight balance mechanism with seat slider operating the functions with two point control (Front pivot tilt with feet resting on ground, Tilt tension adjuster) and 4 position locking with anti-shock mechanism. The pneumatic height adjustment should have adjustment stroke of approx. 10 cm. and the pedestal should be injection molded in black 30% glass- filled Nylon and fitted with 5 nos. twin wheel castors. DIMENSIONS : WIDTH 750mm X DEPTH X HEIGHT 880mm – 980mm X SEAT HEIGHT 450 – 550mm . Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty. |
| 69 | Manufacturing, providing and Placing Center & Corner table of approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing and fixing tables of Side table Size - 500mm W x 500mm D x 365mm H for whose top & Base are made of particle board wood Grade E-1(Environmental Friendly), thickness 19mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea formaldehyde emissions ( |
| 70 | Manufacturing, providing and Placing High chair of following dimensions with the following specifications.Providing and fixing tables of High Chair, High chair of size: 480Wx 440Dx 990Hmm & seating Height is 760 mm. Seat & Understurcture are madeout of teak wood with melamine plish.Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty. |
| 71 | Supply and installation of a standard Carrom Board with accessories suitable for indoor use in schools, clubs, or recreational centers. The item shall include the board, coins, striker, and powder. The board should meet the specifications as per International Carrom Federation (ICF) standards. |
| 72 | Supply and installation of a standard Air Hockey Table suitable for indoor recreational use. The table shall have a smooth playing surface with air blower system for frictionless puck movement, electronic scoring, and sturdy construction. |
| 73 | Supply, delivery, installation, testing, and commissioning of a motorized treadmill suitable for use in gyms, fitness centers, health clubs, sports facilities, or institutional applications. The treadmill shall be robust, electrically powered (220–240 V, 50 Hz) with a quiet motor and a high‑quality running belt. It should support continuous usage, have adjustable speed controls, safety features, and durable build. Warranty and after‑sales service support should be provided as per tender/contract conditions. |
| 74 | Supplying and delivering Foosball Table – Soccer Table, complete with playing surface, rods with handles, players/men, scoring units and all accessories, as per technical specifications and as directed by the Engineer‑in‑Charge. Item shall be of approved make, sturdy construction, suitable for indoor use Includes: Delivery, packing, installation, testing of tabletop game in position, all fittings & fixings complete. |
| 75 | Supplying, delivering and placing in position Table Tennis Table complete with net, posts and accessories, foldable type, conforming to ITTF/TTFI standards, with 25 mm thick pre-laminated or MDF playing top, anti-glare finish, mounted on heavy duty MS frame with wheels and locking system, including painting / powder coating, leveling and all fittings complete as required.Table Size: 2740 mm × 1525 mm × 760 mm heightTop thickness: 19–25 mm laminated board / MDFFrame: MS tubular frame (powder coated)Foldable: Yes, two independent halvesWheels: 8 wheels with locking systemNet height: 153 mmFinish: Anti-glare blue/green laminated topStandard: ITTF / TTFI approved |
| 76 | Internal Electric Installation |
| 77 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C |
| 78 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing thepoint with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C |
| 79 | Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 80 | Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 2 Nos. 4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 81 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 82 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 83 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 84 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 85 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 86 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 87 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 88 | 5/6 amps switch |
| 89 | 15/16 A switch |
| 90 | 6 pin 15/16 A socket outlet |
| 91 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required |
| 92 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 93 | LED Down lighter (SMD Type) (System lumen efficacy ≥120<135lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim . 18 watt |
| 94 | LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) - 36 watt |
| 95 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way (4 + 12), Double door |
| 96 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 97 | Supplying and fixing following rating, four pole, 415 volts, MCB, \\"C\\" curve in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 98 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 99 | Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep |
| 100 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required 25 mm |
| 101 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 102 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 103 | Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. |
| 104 | Supply of 45W LED Decorative Post Top type luminaire with System efficacy of 80 lm/W (3600 lumens), suitable for external poles of inner dia. 65mm) to 75mm. LED engine should be enclosed in a technically advanced poly carbonate Opal diffuser (Floral/flower design of dia (Ø) 406mm±5mm, made up of aluminium top spun cap with die cast spigot housing base, duly powder coated with grey color polyester capable of producing uniform diffused light. All external hardware must be of SS304 grade. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP65 and IK07 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 4000 K, CRI of Minimum 70 and SDCM <5. LEDs must be driven at max 70% of the rated current. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 150-270V AC. Driver Efficiency > 85% & 4 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 should be there. |
| 105 | Supply of 100W LED Decorative Post Top type luminaire with System efficacy of 100 lm/W (12000 lumens), suitable for external poles of dia. 60mm to 75mm. Fixture dimension: 480X470mm, height: 550mm (including PDC base). Light fixture should have Dark Sky certification to avoid light pollution and power wastage. Luminaire shall be made up of pure polyster power coated RAL7021 pressure die cast Aluminium housing with PC lens and tempered glass with street light optics. All external hardwaremust be of SS304 grade. LM 80-08 compliant LEDs of EMC/ceramic package from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP66 and IK07 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing) with ambient operating temperature -10° to +45° C. The LEDs used should be with CCT of 4000/5700 K, CRI of Minimum 70 and SDCM <5. LEDs must be driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickeness of 35 micron to be used for LED mounting. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-280V AC. Driver Efficiency > 85% & 5 KV internal surge protection, 10KV external surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. OEM should provide Dark Sky Certificate mentioning the name of the item along with unique ID issued by \\"Dark Sky International\\". Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 should be there. Approved Make: Wipro LP16 or equivalent in Regent/LT |
| 106 | Supply of LED based bollard of squared cross section (120 X 120mm), housing made up of extruded aluminium,sturdy and embossed brand name/logo name of manufacturer and optics made of milky white PC diffuser with pattern. The fixture should have a minimum system efficacy of 55lumen/Watt and a minimum system lumen output of 850 lumens and minimum system wattage of 15Watts.The fixture shall have a CRI of minimum 80. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP65 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK10, CCT: 4000K. The fixture driver should have an operating voltage range of 140-280 V, surge protection of >=3KV, external surge protection 10KV, PF >0.95, THD<10% & Driver efficacy >80% @full load and rated voltage. Ambient temp range: 0deg to 45deg C. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Height: 800mm & Weight including all accessories should not be more than 2.2Kg. |
| 107 | Supply of 135mm Dia X 140mm Height Recess Down Light 4000K with Integral driver & completely made in India luminaire of cutout: Ø126mm. The luminaire’s shall be made of Exteruded aluminium powder coated. Optical compartment is sealed with toughened glass using Silicon gasket ensuring IP65 & IK06 protection and lifelong performance.The LEDs shall have minimum CRI ≥70 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 15W and shall deliver 1350lumens. Beam angle of the Luminaire shall be 29/60 deg. Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 150 - 270V AC. 2 stage Constant current driver with Inbuilt 3kV surge protection. The luminaire shall have declared life of 50,000 burning hours at L70. Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. |
| 108 | Supply of IP20 linear suspended standalone fitting made of extruded aluminium housing with white powder coating and is should have Microstructured antiglare optical lens. Fixture should have minimum efficacy at System level (Not Chip Level) >120lumens/watt(SDCM<3) and a minimum system lumen output of 2400 (downlight) lumens (±10%) and maximum system wattage of 20W and Beam angle 60-65deg, sheilding angle should be greater than 65deg. Fixture should have office complaince i.e UGR<16. Luminaire should have Life of 50000hrs@L70B0 Lumen maintenance at 45deg C ambient temperature, CCT up to 4000K, CRI >80, PF >0.95, THD<5% at full load, EMC/EMI compliance and an operating Voltage Range of 150 - 270V AC & Internal Surge Protection 3KV. The fixture should comply with the parameters as per IS10322. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Including 3 core 1.5 sq.mm. Dimension-1104X85X53 mm (±2mm). |
| 109 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient\ temperature).1.5 TR with 5 Star BEE Rating |
| 110 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient\ temperature).2.0 TR with 5 Star BEE Rating |
| 111 | Supply, fabrication, installation, testing and commissioning of stainless steel kitchen exhaust hood / industrial chimney system made of SS-304 / SS-202 sheet (1.0–1.2 mm thickness) including baffle type grease filters, drain channel, oil collection tray, LED light fittings, complete with MS/GI ducting, centrifugal exhaust fan/blower, vibration isolators, hanging supports, flexible connection, rain cap, bird mesh and necessary accessories. |
| 112 | Retrofitting work for column and beam |
| 113 | Preparatory works |
| 114 | Carefully removing or chiseling, Loose Concrete and existing plaster of any thickness from the damaged Beam surface/ Column Surface with the help of small chisel and hammer weighing not more than 5 pound(3kg) , including collecting, stacking & carting away the debris from the site for full height of column at specified floor level, wherever required as directed by Engineer incharge |
| 115 | Beams/columns/Concrete Surfaces to be strengthed for exposed reinforcemnt |
| 116 | Hilti work for Jacketing Rebar Works |
| 117 | Surface Preparation:The surface preparation to be made to remove all the loose particles and the smooth surfaces should be abraded mechanically and washed with clean water before starting rebar/anchor instalation works |
| 118 | Providing and fixing shear anchor of 8mm dia drilling Dia of 12mm and 100 to 150mm embedment depth and 225 to 250 mm Bar length long filling of hole with Hilti RE 10 or Sika AnchorFix®-3030 Epoxy resinor equivlent with approved Hilti Dispenser gun, removing drawing out of the entrapped air etc from the drilled hole all complete as per manufacture specification and directions of the Engineer in charge consultant it shall include labour for pressure grouting Epoxy mortor saturating the anchor with Epoxy drilling the RCC members and inserting the saturated anchor inside the drilled hole and merging the bushes with the RCC members etc complete |
| 119 | For Column Strengthening |
| 120 | For Beam Strengthening |
| 121 | Verticle Rebar with 150MM EMBEDMENT Depth for Following |
| 122 | Supplying, Drilling/Cleaning hole and injecting Hilti make ETA Approved HY-200 V3 chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023/TR069/TR066 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criteria. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. |
| 123 | Drilling and fixing vetrical rebars for : |
| 124 | Pre Soaking: Prior to the placing of micro concrete, The substrate should be pre soaked with clean water and any standing water should be removed |
| 125 | Micro concrete shall be maintained properly as per manufactures specifications to achieve dense solid mass prepared microconcrete shall be poured properly as per in prefixed holding boards slurry tight form work properly aligned to required size and shape and well oiled air bubbles if any shall be removed by tapping the boards removing the boards after 24 hours and curing the micro concrete thoroughly for 14 days quoted cost should be inclusive of shuttering, curing etc. complete. |
| 126 | Micro concrete Placing : Rearm Crete MC (G) is a single component, ready to use pourable polymer modified non shrink cementitious repair concrete with special grade cement, aggregates and chemicals. Rearm crete MC (G) comes in a 30 Kg bag which is mixed with 4.5 Litres of water and mixed using a paddle mixer for 5 minutes and it should be placed immediately. If the width is more than 40mm, 10mm douwn size aggregates can be mixed upto 50% considering the flow and site requirement and conditions. Air vent to be provided in the form work |
| 127 | Providing and applying approved epoxy Bond of Fosroc Nitobond or Sikadur®-32 LP (IN) OR ReArm Bond EBA or equivalent before polymer plaster/concrete to have the perfect bond between old concrete and new concrete/polymer plaster surface confirming to ASTM-C-882-87 using nylon brushes scaffolding labour etc. complete. |
| 128 | For Column Strengthening |
| 129 | For Beam/slab Strengthening (involving Providing New Cover Concrete, Honeycombing, Core Filling, Damaged Concretes) |
| 130 | For Column and Beam Strengthening (Preffered Make Fosroc/Sika/MYK) |
| 131 | Providing and injecting a ready to use non shrink, cementitious free flow micro-concrete (> 100 mm).Product: SikaRep® Microcrete-4 or equivlent + Aggregates 10mm downsize (leak proof methodology to be adopted to get wel compacted concrete reulting in smoother outer surface)Yield: approx. 17 ltr/bag (30kg) (depending on the size and quantity of coarse aggregate added)Product requirements: compressive strength > 60 N/mm2 (28 days) according to ASTM C 1107-99. (Mixdesign to be done to achieve M40 grade)- fill the grouting gun with resinmix, maintain desired pressure at exit (7 to 10kg/Cm2) by monitoring presure gauge at exit. Grout the material through prefixed nozzles in the structural elements till its refusal. Seal the nozzle withepoxy sealent after the refusal. Moniitor lakages through othernozzles while grouting and seal them as per the requirement. Repeat theprocess all the nozzles. The work should be carried out with all the safety measures like helmet, safety belt and adequate labour insurance under the supervision of qualified supervisor etc. complete. (Cost of all material and cleaning of the pockets by compressed air shall be in the scope of the contractor). Cost should be inclusive of complete providing, fixing, packing, removing etc of injectors, curing of the jacketing surface for minimum 14 days, Shuttering can be removed after 3 days. |
| 132 | For Column |
| 133 | For Beam |
| 134 | Corrosion Protection to Existing Reinforcement |
| 135 | Providing and Applying Epoxy based zinc rich primer Anticorrosive coating with approved make (Sika Friazinc® R or equivlent) on Exposed reinforcing Steel by removing corroded surface of Reabr by supplying and applying rust remover cum passivator (Sika Rustoff 100) to remove rust and exposing Rebar to its full circumference gentally at possible locations |
| 136 | CENTERING AND SHUTTERING |
| 137 | Formwork /Shuttering work: Providing, fabricating, erecting, centering, single/multi level staging, strutting, propping and bracing, bolting, welding and fixing in position steel / PVC Coated wooden ply of required thickness form work of good quality and making the joints of shuttering fully leak proof by using heavy duty brown self adhesive tape or equivalent, aligning to line and levels including M.S Ties,PVC spacer for all type of RCC structural member and keeping the same to the lines, levels indicated on the drawings. It should include cost of striking off forms, de bonding agent, de-shuttering, and de-centering for in-situ concrete work at levels till sufficient strength to self-support itself without cracking and distortion. It should also include all works related to provisions of grooves, drip, throats, chamfers, inserts, sleeves, scaffolding, staging, conduits, junction box, recesses, shape, size, bands, projecting dowels etc. complete for at all levels and all heights. Note: Nothing extra shall be paid for circular, curvilinear & any other irregular shape, form, size. All work to have PVC Coated Ply Shuttering Only with maximum permitted 8 repetitions only. (Form works for Drop panel & Column flare shall be measured in Slab at the respective level) Vendor should apply shuttering oil over the same which is inclusive of the item. |
| 138 | Formwork / shuttering should be approved as per required thickness for structural concrete work in locations - PVC Coated plywood shuttering of required thickness and centering including strutting, propping, bracing, bolting, wedging, casing, striking, removal etc. complete for any size, section, thickness. Props shall consist of well designed steel pipes adequately braced (wooden ballies as props shall not be permitted). |
| 139 | With MS Plate/PVC Coated Wooden Ply Shuttering of required thickness for Columns to be Strengthened to be leak proof, Shuttering to be properly Staged with all entry nozzle Loactions, Airvents for Jacketing works.Shuttering to be properly Anchored or based to existing Slab surface to have a fool proof stable shuttering system. |
| 140 | Columns, pillars, piers, abutments, posts and struts, column flare of all shapes.Walls (any thickness) including pilasters, buttresses, plinth and string courses, Shear walls, , core walls, lift walls, fins etc. |
| 141 | Beam, inclined beam, rib beams, curved beam. |
| 142 | REINFORCING STEEL Please Enable Macros to View BoQ information |
| 143 | REINFORCING STEEL Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender