Tender For Repair & maintenance Of electrical installation Work In Various Community Centres Of Sec 45,50 & Ramdarbar Under Electrical Sub Div No.3, Mc Chandigarh.
Tender Value
4.72 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
1 days left
EMD
9442
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & maintenance Of electrical installation Work In Various Community Centres Of Sec 45,50 & Ramdarbar Under Electrical Sub Div No.3, Mc Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | S/E of Ceiling Fans 1200mm sweep without fan regulator but including M.S. suspension rod as per site requirement and wiring complete in all respect of Usha/ Bajaj/ Khaitan make including making connection with 23/.076' flexible wire to the adjacent fan point and regulator . The work shall be executed to the entire satisfaction of Engineer in charge. |
| 2 | Supply,Installation, Testing and Commissionng of wall fan 450 mm (ISI mark) including cost of petty material required to complete the job in all respect. (Make Crompton/Havells / Armonard/ Bajaj) complete in all respect.There shall be free replacement at site for a period of five year from the date of delivery, Toll free number shall be provided by the supplier to the client Exhaust fan , wall fan etc. Complete in all respect, as required. |
| 3 | Supply and Erection of Exhaust fan (heavy duty motor with copper wound metallic body) following size complete with motor, mettalic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation,epoxy powder coating along with mettalic louver to be installed in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC. Size 12\\" Sweep 900 RPM with louver of Havells make Turbo Force SP/ Orient make Industrial heavy duty / Crompton make HDEF EXHD 300- 6-1 / Bajaj make Supreme DLX only. |
| 4 | Supplying and fixing two module stepped type electronic fan regulator on the existingmodular plate switch box including connections but excluding modular plate etc.as required.Make: ABB, Havells,Legrand, Northwest Wipro, Norysis, Captree (Murano), Schneider. DSR 1.25 |
| 5 | S/I/T/C OF 24 Watt LED Downlighter, made of die cast aluminium housing and high power LED as alight source wih acrylic diffuser and incluting electronic driver with minimum 100 Lumens/watt, THD <10%, Pf > 0.95, protection IP 20, and CCT 4000-5700K, Surge protection 4kV, Operating Voltage Range - 150V – 270Volts.MAKE- philips ,Wipro,Trilux,Osram,Havells, JAGUAR, Bajaj, Surya, Luxmax complete in all respect.Warranty:- The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations. The rate is inclusive of buy back value of old fitting.The work shall be executed to the entire satisfaction of Engineer-in-charge |
| 6 | Supply & Erection of 1x18 watt retrofit LED tube rod with batten Supply & Erection of 1x18 watt retrofit LED tube rod with batten made of aluminium housing with PC diffuser Lumen out put should be more than 100 lumens per watt (1800 LUM) with LM 79 report from NABL. The make of the fittings should beHavells/ Wipro/ Twinkle/ Surya/ Phillips/ Bajaj . The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 7 | P/F of LED luminarie of size 2'x2' of 30-36 watt (595x595 mm) surface/recess type including driver with system Lumens 3600-4000 Im having efficacy of minimum 100 lm/W. THD <10%, PF > 0.95, Having coloured temperature 4000-6500 K recess type suitable to be fixed in Armstrong/ grid ceiling. The fitting should provides soft light and glare free symmetrical illumination and is to be fixed in the existing false ceiling frame of make Havells/ Wipro/ Twinkle/ Surya/ Phillips/ Bajaj alongwith connection, testing and commissioning erc. This job also includes all petty material required to be entire satisfaction of Engineer-in-charge. Warranty:- The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations. |
| 8 | Supplying and fixing following modular switch /socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 9 | 3 pin 5/6 amp switch outlet DSR 1.24.1 |
| 10 | 15/16 amps switch outlet DSR1.24.3 |
| 11 | 3 pin 5/6 amp socket outlet DSR1.24.4 |
| 12 | 15/16 amps socket outlet DSR 1.24.5 |
| 13 | Supply,Installation, Testing and Commissionng LED cove Strip light 5mtr roll with 4.8W/mtr and 2 amps complete with LED driver. (2 years Warranty). complete in all respect.The work shall be executed to the entire satisfaction of Engineer-in-charge. |
| 14 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface/ recessed steel/ PVC conduit as required.Make: Finolex/Polycab/Havells/KEI |
| 15 | 3x 1.5 sq. mm DSR 1.17.3 |
| 16 | 3x 2.5 sq. mm DSR 1.17.12 |
| 17 | Providing and fixing 400 A 50 KA 4 POLE rating and breaking capacity MCCB withthermomagnetic release and terminal spreaders in existing cubicle panel boardincluding drilling holes in cubicle panel, making connections, etc. as required. |
| 18 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole |
| 19 | Supply & erection of high power 150 Watt LED Flood Light luminaries(System lumen efficacy ≥120 and <135 lm/Watt) High-brightness White LEDs sources with high transmittance LENS on each LEDs 4000 K to 6000 K color temperature & CRI<70 value for ensuring good quality light output. Life of at least 50,000 hours & LED driver efficiency >95% Power factor greater than 0.90, THD<15% & min 6KV surge protection with operating voltage range from 120-270 V for ensuring lifelong high performance of luminaire, having in built protection against short circuit, over voltage protection, the fixture is made of LM-6 Pressure die-cast aluminum with engraved company name & have IK05 & IP66 Class I protection with NABL Accredited LM-79 & LM-80 Report. The fixture should be comprehensively warranted to be repaired or replaced for any defect within 5 years of installations. The luminary should not be over power derived. The fitting shall be mounted on the plate bracket on existing pole including making connection, testing & energizing complete in all respect to the entire satisfaction of Engineer-in-charge. The LED Street Light Fixture shall be installed on 7.5/9/10 mtr long pole. The luminary should be make Philips/ Bajaj/Crompton/ Havells/ Surya/ Wipro/HQ Lamp. |
| 20 | Supply of 45Watt LED integrated Post Top fixture of die cast alum base and spun aluminium round top. LEDs are mounted directly on die cast alum heat sink suitable for mounting on pole having dia 60-75mm, luminary efficancy should be more than 100 lumens/watt. Power factor more than 0.95, CCT 4000-6000K ± 275, IP 65 Protection, System driver efficiency more than 85%, input volatge 100-270V, with opal/frosted/prismatic, P.C./ PMMA diffuser & inbuilt surge protection of 4 kV & external surge protection of 10kV. Make Philips, Wipro, Surya, Twinkle, Legero, Havells .The fixture is to be installed on the pole with or without suitable size reducer as per requirement. The job include the cost of supply and including the cost of reducer on the pole for erection of fixture.The fixture should be comprehensively warranted to be repaired or replaced any defect within five years of installation. The work shall be executed to the entire satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender