Tender For Repair And Maintenance Work Of Ward No.16 Bell Nagar Thiruvalluvar Reading Room In Thuvakudi Municipality
Tender Value
4.90 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
14 days left
EMD
4900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Work Of Ward No.16 Bell Nagar Thiruvalluvar Reading Room In Thuvakudi Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Dismanteling of existing damaged Pressed Tiles & Weathering Course specification. |
| 2 | Dsimantellin of Brick / Stone Masonry in cement mortar walls, add for every additional 3m or part there of over the initial height of 3m |
| 3 | Plain Cement concrete 1:4:8 (One cement,four sand, eight aggregate) mix using 40mm ISS HBG metal including cost and conveyance of all charges etc., complete as per standard specifications. |
| 4 | Brickwork in cement mortar 1:5 mix using country brick including cost and conveyance of all charges etc., complete as per standard specifications. |
| 5 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 6 | Centering for soffits of RCC slabs of plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cmx60cm and B.G 10 stiffened with M.S anges of size 25mmx25mmx3mm laid over silver oak (C.W) joists of size 10cmx6.5cm (Spaced at about 90cm c/c) and supported by casuruina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specifications |
| 7 | column |
| 8 | Supplying and fabricating of steel for all RCC works including cost of steel, binding wire and all labour charges etc., complete as per standard specification |
| 9 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 10 | Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 11 | Special Ceiling plastering with cement mortar 1:3 (one cement and three sand) mix using 10mm thick including cost and conveyance of all charges etc., complete as per standard specifications. |
| 12 | Plastering with cement mortar 1:5 (one cement and five sand) mix using 12mm thick including cost and conveyance of all charges etc., complete as per standard specifications. |
| 13 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification |
| 14 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour with priming coat including the cost all materials etc.,complete, in all floors. |
| 15 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 16 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 17 | Providing and fixing Weld Mesh 7.5 x 2.5cm 10 Gauge as per standard specification. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender