Tender For Special Repairs To Single Jcos Living Accn Of Bldg No P-378 Est Sec (Jcos/Or) And Provn Of Protective Shed Over Fixed Chimney To Prevent Ingress Of Rain Water At Offrs Bungalow And Other Loc In North Complex At Ima Dehradun.
Tender Value
47.72 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
10 days left
EMD
95450
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Single Jcos Living Accn Of Bldg No P-378 Est Sec (Jcos/Or) And Provn Of Protective Shed Over Fixed Chimney To Prevent Ingress Of Rain Water At Offrs Bungalow And Other Loc In North Complex At Ima Dehradun.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Sep-2026 | Revised BOQ | BOQ | 06-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each including cutting holes for taking out of holdfast & making good in CM (1:4) after fixing new chowkats/ frames complete all as specified. |
| 2 | All as per item No 1 here in above but not exc 1.5 Sqm each including steel windows. |
| 3 | S & F factory made coloured WPC door frame 100% Solid, size 125mm x 65 mm double rebated ,made from wpc material comprising of virgin PVC polymer of K value 58-60, calcium carbonate and natural fibres minimum compressive strength of 58 N/mm2, and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in position with SS dash fasteners of required dia and length, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed. (colour to be approved by Engineer-in charge ) |
| 4 | All as per item No 3 here in above of size 100 mm x 50 mm, single rebated. |
| 5 | All as per item No 4 here in above but of size 70 mm x 45 mm, single rebated for cupboards. |
| 6 | S & F factory made 35mm thick 100% Solid WPC solid decorative type flush Door Shutter of required size comprising of virgin PVC resin of K Value 58-60, Calcium Carbonate and natural Fibers and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum having good screw holding capacity, Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as directed and specified. |
| 7 | -ditto- but 20 mm thick WPC shutter for cupboards complete all as specified and directed. |
| 8 | M&L for 35 mm thick factory made solid WPC gauged door shutter with wire mesh in three number of division with brown wood grain texture, including SS wire mesh (0.36 mm nominal dia of wire and average width of aperture 1.40 mm) fixed with (15 x 15 ) mm square tubes in side rails with screwing 8x28 heat metal zinc coated screws that can be removed or fixed again after changing of wire mesh when needed covered with moulded beading complete all as specified and directed.Note:- Gauged door shutter shall be fabricated from single piece of WPC board. |
| 9 | S&F stainless steel butt hinges of size 100 mm fixed full body threaded star headed counter stainless steel sunk screws. |
| 10 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised with of flap (when open) 30 mm etc complete all as directed and specified. |
| 11 | S&F 150 mm long stainless steel handles, cast type complete all as specified |
| 12 | S&F stainless steel tower bolt 200 mm long 10 mm dia of bolt complete all as specified and directed. |
| 13 | S&F stainless steel sliding door bolt 250 mm long 14 mm dia with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts of SS complete all as directed and specified. |
| 14 | S&F 150 mm size hasp and staple, safety type, stainless steel with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 15 | S&F double legged floor door stopper 150 mm long of stainless steel with rubber etc complete all as specified and as directed |
| 16 | S&F ball catches with 8 mm dia steel ball catches for cupboard shutter including striking plate as approved etc complete all as directed and specified. |
| 17 | Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. |
| 18 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed. |
| 19 | S & F in repairs 25 mm dia Stainless Steel 1 mm thick curtain rod including fancy type brackets, and decorative end caps etc. fixed to wall complete all as specified. |
| 20 | M&L for preparation old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 21 | M&L preparing old steel or iron surfaces over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 22 | M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one number wire gauged shutter sliding type, with aluminum sections as per Series-B (18mm) 3 track of Jindal section for sliding windows, with and including glass to shutters tinted/ coloured glass 5mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type 2 Nos aluminium handle of size 75mm and locking system including aluminium grill of 5 mm thick, average width of aperture 50mm including S&F stainless steel wire cloth to shutter with 0.36 mm dia of wire and 1.40 aperture complete all as specified and directed. |
| 23 | All as per item No 22 here in above but of 4 track system complete as directed. |
| 24 | M & L 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) including necessary form work as in sub base for flooring etc., complete all as specified. |
| 25 | M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile including demolition of old PCC/ flooring complete all as specified and directed. |
| 26 | M & L for 8-10 mm thick vitrified tiles of light shade of size 600 x 600 mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6,complete all as specified and directed. |
| 27 | All as per item No 26 here in above but on vertical surfaces as in skirting, dados over and including 10 mm thick rendering in CM 1:4 including dismantling of old skirting complete. |
| 28 | M&L for Non skid vitrified (heavy duty) ceramic coloured tiles 8 to 9mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in epoxy coating grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 29 | All as per item No 28 here in above but on vertical surfaces as in skirting, dados over and including 10 mm thick rendering in CM 1:4 including dismantling of old skirting complete. |
| 30 | M&L for 16 mm thick granite (colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick cement screed bed 1:6 CM as in door & window cill and small pieces for soap dish etc including cutting,chases and inserting in wall in horizontal or vertical surfaces including grinding the edges half round where required) and polishing complete all as specified and directed. |
| 31 | M&L for 16-18mm thick Udaipur Green Marble laid over 15mm thick screed bed in cm 1:6 as in treads of steps in one piece and at landings including cutting, jointing, moulding, mirror polishing complete all as directed. |
| 32 | All as per item No 31 here in above but as in skirting/dado over 10mm thick rendering in CM 1:4 complete all as specified. |
| 33 | M&L for 16 to 18mm thick white makrana marble on vertical surfaces as in risers of steps in one piece over 10mm thick rendering in cm 1:4 including cutting, jointing and mirror polishing complete all as directed. |
| 34 | M&L for Cutting holes superfacial area exc 150 but n exc 400 Sqcm into or through brick walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B-l as required |
| 35 | S&F in repairs, 75 mm bore outlet cast iron floor trap incl cockroach trap with gratings including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified. |
| 36 | S&F in repairs, 50 mm bore Cast iron (spun pipe) soil, waste and vent pipes, in any length without ears, laid in trenches or in floors or fixed to wall complete all as specified and as directed |
| 37 | S&F in repairs, for 75 mm bore Cast iron (spun pipe) soil, waste and vent pipes, in any length with, laid in trenches or in floors or fixed to wall complete all as specified. |
| 38 | S&F in repairs, 100 mm bore Cast iron (spun pipe) soil, waste and vent pipes, in any length without ears, laid in trenches or in floors or fixed to wall, complete all as specified. |
| 39 | S&F in repairs, 75mm bore cast iron Tee of (any radius) equal or unequal, spun pipe diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified. |
| 40 | S&F in repairs, 100 mm bore cast iron Tee of (any radius) equal or unequal, spun pipe diminishing pieces or tapers with oval access door complete all as specified. |
| 41 | S&F in repairs, 50 mm bore cast iron cowls complete all as specified and as directed |
| 42 | M&L for mild steel work as Bands, straps, including bolts, if required, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed pl. |
| 43 | M&L for 15mm thick (Average thickness) rendering on fair faces of concrete in sunken portion in CM 1:3, mixed with water proofing compound on vertical and horizontal surfaces and providing slope towards outer wall and finished even and smooth without using extra cement. |
| 44 | Supply only liquid water proofing compound complete all as specified and directed. |
| 45 | M&L for 15mm thick rendering in CM 1:3 on dammages portion of concrete in small patches (in repairs) to facia/ ceiling of roof projection in double storied building including removing loose material on vertical and horizontal surfaces finished even and smooth without using extra cement. |
| 46 | M&L for water proofing treatment to sunken roof slab with APP based modified polymeric membrane as per manufaturer's instructions with following course of description (a) Applying a priming coat of bituminous primer @ 0.30 kg/sqm, till the surface is properly impregnated.(b) Apply a coat of bitumen 85/25 grade @1.20 kg/sqm over primer.(c) Over the coat of bitumen as above laying 3 mm thick APP modified five layer polymeric membrane, minimum weight not less then 3.60 kg/Sqm reinforced with polyster non-woven fabric (weighting not less than 150 gms/sqm). The overlaps are then sealed/fused by flame or bitumen Note: Rate of this item inclusive ponding test demolition and removal of old sunken WPT. The ponding test (for 48 hours) shall be carried out by the contractor, if any defect noticed the same portion shall be rectified by redoing by contractor without any extra cost to Govt. |
| 47 | M & L for Roof treatment by applying a coat of cold applied oil based bituminous primer over cleaned surface @ 0.50Kg/Sqm, and laid 3mm thick APP modified five layer polymeric membrane, minimum weight not less then 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method as per manufacturer's instructions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces with grooves over 40mm thick 1:3 screed bed & make good in cement mortar 1:3, finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign materials by wire brushing, cleaning roof surfaces with water and removal of spoil out side the defence premises, complete all as specified and directed. Note :- Work shall be executed by authorised applicator of manufacturer and upto roof height of double storied building. |
| 48 | M&L for plain Cement concrete 1:7:12, type F2 (using 40 mm graded aggregate) in sunken portion filling and mass complete all as specified and directed. |
| 49 | M&L for Non skid glazed ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including of 15 mm thick screed bed in CM 1:6 complete. |
| 50 | M&L for Glazed ceramic tiles coloured 300mmx 450mm , 7 to 8 mm thick, on vertical surface of wall such as skirting/ dados, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick rendering in CM 1:4, including dismantling existing wall tiles/ dados, complete all as specified and as directed. |
| 51 | M&L PCC/ RCC 1:2:4 type B-1 using 20 mm graded stone aggregate in benching and copings and small counters etc incl demolition of existing concrete as directed. |
| 52 | M&L for brick work with sub class 'B' bricks, in half brick thick wall built in CM 1:4 straight or curved on plan to any radius with old size bricks incl demolition of old brick work complete all as directed. |
| 53 | M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed. |
| 54 | M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 55 | M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) as in surface channels and drains. (Saucer Drain)including demolition of old PCC complete all as directed. |
| 56 | M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/ stopped ends etc. complete. |
| 57 | M&L for 15mm thick rendering on other than fair faces of brick/ concrete surfaces in CM 1:6 finished even and fair including taking down old cement plaster raking out joints hacking for keys, scrubbing down with waters etc, complete. |
| 58 | M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair including taking down old cement plaster raking out joints hacking for keys, scrubbing down with waters etc, complete all as specified and directed. |
| 59 | Complete removal of existing treatment from walls as specified and directed. |
| 60 | M & L for preparation of new or old wall surface and applying 0.75 to 1 mm thick Birla white/ JK wall care putty over internal and external plaster to make the surface smooth as specified and directed. |
| 61 | M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over one coat of alkali resistant primer complete all as specified & directed. |
| 62 | M&L for Preparation of old decorated plastered surfaces of ceiling and applying one coat of whitewash complete all as specified & directed. |
| 63 | M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed. |
| 64 | S&F in repairs, medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed |
| 65 | S&F in repairs, tubes medium grade galvanized with all fittings and laid in trenches, 20 mm dia bore pipe (including in short length) complete all as specified and as directed |
| 66 | S&F in repairs 500 litre rotational moulded triple layer polyethylene water storage tanks white colour (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I, including one no PTMT ball valve high pressure and two nos of 20 mm dia gun metal gate valve to each tank, complete all as specified and directed. |
| 67 | M&L for Cleaning and removing existing water tanks of any description exceeding 250 litres and not exceeding 500 litres capacity, removing all Scale dirt etc from tanks and from mouths of circulating pipes including washing with bleaching powder etc reconnection and refixing in position, with date of cleaning marking with paint complete all as specified and directed |
| 68 | M & L for cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth complete all as specified and as directed. |
| 69 | Supplying and laying in repairs, of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laid in floors complete all as specified. |
| 70 | Supply only Male Brass Threaded Adaptor (MBTA) 16 mm outer dia for CPVC pipes. |
| 71 | Supply only Brass elbow 16 mm outer dia for CPVC pipes. |
| 72 | S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' trap CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed. |
| 73 | S&F Vitreous china wash down water closet pan (pedestal pattern) white including seat cover with necessary PVC pipe fittings fixed in repair complete all as specified and directed. |
| 74 | S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed. |
| 75 | S&F in repairs, vitreous china counter top wash hand basin white of size approx 450x300mm, fixed over RCC counter, CP waste coupling & waste pipe complete all as specified and directed |
| 76 | S&F in repairs, stop valves/ angle valve 15mm bore cast copper alloy, fancy type, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed. Make : Jaquar Opal Prime Series/ Cera Ruby series/ Kolher |
| 77 | S&F in repairs, 15 mm bore chromium plated, cast copper alloy fancy type. long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.Make : Jaquar Opal Prime Series/ Cera Ruby series/ Kolher |
| 78 | S&F in repairs, mirror bevelled edge, of size 450 x 600 mm of selected quality glass 5mm to 5.5mm thick mounted on 6mm AC building board or commercial ply wood, fixed to plugs with CP brass screws and cup washers complete all as specified and directed |
| 79 | S&F 15mm size PVC connection with PTMT nuts length 450mm long complete all as specified and directed |
| 80 | S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed |
| 81 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed |
| 82 | S&F CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/ Kolher |
| 83 | S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower (3 way)provn with connecting legs & flanges in complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series/ Kolher |
| 84 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 85 | S&F in repair CP brass chromium plated shower rose 125mm size with extension CP Arm pipes. |
| 86 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges |
| 87 | S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed. |
| 88 | S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. Model: ACN - 1173 of Jaquar , Parryware Model No T6010A1, Cera Model No F505101 |
| 89 | S&F for mild steel grills, gratings or forged into spikes, framed balusters and similar work including welding etc conforming to FE 290, GDE E-165 complete all as specfied and directed. |
| 90 | S&F welded steel wire fabric weight exc 4 Kg Per Sqm and fixed complete to steel members complete all as specified and directed. |
| 91 | M&L preparing new steel or iron surfaces over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide zinc chrome primer. |
| 92 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed |
| 93 | S&F Pre-painted colour (black/ Green) galvalume aluminium Zinc coating AZ 150 GI based pre profiled plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, ridges, gutter complete all as directed by Engr-in-Charge. Note work will be carried out upto height of 7.5m on the chimneys whose rates to be included while quoting the rates. |
| 94 | S&F MS angle/ TEE/ Hollow/ Tubularsection & MS plate framed work as in chimney, main and cross beams, hips and jack rafter, purlins where connected to common rafters and etc all as directed by Engr-in-Charge conforming to FE-290 GDE E-165. |
| 95 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. |
| 96 | Taking down old U/S main switches, Sheatmetal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed. |
| 97 | Taking down old unsv T/L, Lamp,Security light of any size and capacity all as directed. |
| 98 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. |
| 99 | Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work. Please Enable Macros to View BoQ information |
| 100 | Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender