Tender For Landscaping Of Front Area Of Main C Us Incl The Area Between Central Library Admin Block Departmental Blocks At Gmc Anantnag [Adv. Cost ₹ 49.40 Lacs (₹ 41.87 Lacs Exclusive Of Gst + Gst@18% ₹ 7.53 Lacs)]
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
98800
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Landscaping Of Front Area Of Main C Us Incl The Area Between Central Library Admin Block Departmental Blocks At Gmc Anantnag [Adv. Cost ₹ 49.40 Lacs (₹ 41.87 Lacs Exclusive Of Gst + Gst@18% ₹ 7.53 Lacs)]
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means in foundation trenches, drains, pipes and cables etc.(not exceeding 1.5 Mtr. In width or 10 SqMts on plan) including dressing of sides and ramming of bottoms, lift upt 1.5 Mtr. Including getting out excavated soil and disposal of surplus soil as directed and lead up to 50 Mtrs . |
| 2 | Providing and laying hand packed stone soling in foundation ,under floors etc. incl ramming, watering and consolidating complete ,cost and carriages of all materials involved upto site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade M-7.5 excluding the cost of centering and shuttering - All work at all levels in : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including cost and carriage of all materials involved upto site of work complete. |
| 4 | Providing and laying in position cement concrete in M-15 grade concrete excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost and carriage of all materials involved upto site of work complete. |
| 5 | Providing form work including Centering ,shuttering , strutting, propping etc.using ply wood sheeting with water proofing ply board (12 mm min.thickness) and removal of the same for) walls of any thickness |
| 6 | Providing and laying in position Full colur vitrified tiles of size 400mm x 400mm conforming to ISI15622 laid on 1:4 mix i/c pointing of joints with white cement and matching pigment, all complete as per directions of incharge laid over 20mm thick (1:4) mix Mortor |
| 7 | Structural steel Work in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using CI etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.ORNAMENTAL WORK&carriages of all materials involved upto site of work complete |
| 8 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc completeOn CI work |
| 9 | Supply and Filling of Avavilabe earth incl Cutting from avaliable araa within Campus |
| 10 | Suupply & Spreading of good earth in required thickness as per directions of officer in-charge incl leveling and compaction all leads and lifts complete job |
| 11 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared |
| 12 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, stair cases of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 16mm thick area of Slab upto 0.5 sqm |
| 13 | Providing edge moulding to 18 mm marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge (Granite Work) Double moulding |
| 14 | Providing, supplying, casting/fabricating, assembling and fixing of 8 ft (2.44 m) long ornamental garden bench with decorative Cast Iron (CI) metal supports/legs and Mild Steel (MS) structural members, of approved architectural pattern, design and finish, complete in all respects, comprising heavy-duty decorative CI side supports/end frames with ornamental motifs, arm rests and suitable intermediate supporting members, accurately cast and properly fettled, free from cracks, blow holes, honeycombing and other casting defects, with load-bearing CI sections generally not less than 8 mm thick; providing and fixing structural Mild Steel rectangular hollow/suitable sections of minimum 50 × 20 mm size and minimum 4.0 mm wall thickness for seat/backrest framing, bracing, stiffeners and supporting members, including MS flats/angles/plates of adequate thickness wherever required, all MS sections being straight, true to dimensions and free from rust, pitting, cracks, laminations and other defects; providing and fixing seasoned, kiln-dried and properly treated timber/WPC/HDPE planks of approved quality, suitable for outdoor use, for seat and backrest, of suitable thickness and width, including cutting, shaping, edge rounding, drilling, sanding and finishing; overall bench length 8 ft (2.44 m), seat height approximately 450 mm and seat width 450–500 mm, with backrest height, inclination and profile as per approved architectural design; providing and fixing all necessary MS/SS/GI bolts, nuts, washers, screws, brackets, cleats and accessories for securely connecting the seat and backrest to CI/MS supports, including MS/CI base plates of minimum 6 mm thickness wherever required and heavy-duty galvanized anchor bolts for securely anchoring the bench to concrete/stone/tiled flooring; including cutting, drilling, welding, grinding, dressing and finishing of all MS members, with sound and uniform welds free from cracks, porosity and other defects; thoroughly cleaning and preparing all CI/MS surfaces by wire brushing/mechanical cleaning to remove rust, scale, oil, grease and loose material, followed by application of one coat of approved anti-corrosive metal primer such as red oxide/zinc-rich primer and two coats of approved exterior-grade synthetic enamel/PU paint of approved colour and shade, including proper surface preparation and drying between coats; timber, where used, shall be properly treated against termites, fungus, moisture and decay and finished with approved exterior-grade protective coating, while WPC/HDPE shall be UV-stabilized, weather-resistant and suitable for outdoor applications; all exposed edges and corners shall be suitably rounded/chamfered and the completed bench shall be rigid, stable, level, free from rocking, sharp projections and unsafe edges, capable of withstanding normal public-use loads without permanent deformation; all materials shall be of approved quality and conform to relevant IS/BIS specifications wherever applicable; including complete fabrication, assembly, transportation, loading, unloading, all leads and lifts, handling, labour, tools and plant, wastage, fasteners, anchoring, painting and all incidental works necessary for proper installation and completion of the ornamental garden bench in all respects, as per approved drawing/design and directions of the Engineer-in-Charge. |
| 15 | Providing and planting Thuja occidentalis / Thuja orientalis (Arborvitae) plants, 60–90 cm height, healthy and well rooted, including digging pits of required size, supply of good earth, FYM/compost, planting, staking wherever required, watering and maintenance complete. |
| 16 | Providing and planting ornamental conifer plants, such as Picea smithiana / Picea pungens, 1.20–1.50 m height, healthy and well developed, including excavation of pits, filling with approved earth/FYM, planting, watering, staking and complete maintenance. |
| 17 | Providing and planting ornamental deciduous flowering trees, such as Prunus cerasifera / Prunus serrulata or other approved flowering variety, 1.50–2.00 m height, including pit preparation, manure, planting, staking, watering and maintenance complete. |
| 18 | Providing and planting Berberis / Berberis thunbergii ornamental shrub, 30–45 cm height, bushy and healthy, including preparation of bed, supply of good earth and FYM, planting, watering and maintenance complete. |
| 19 | Providing and planting Hydrangea / flowering perennial shrubs, 30–45 cm height, healthy rooted plants, including bed preparation, supply of manure/compost, planting, watering and maintenance complete. |
| 20 | Providing and planting seasonal flowering plants, including Petunia, Marigold, Pansy, Salvia, Dianthus, etc., healthy nursery-raised plants, at approved spacing in prepared flower beds, including manure, planting, watering and maintenance complete. |
| 21 | Providing and planting low-height formal hedge plants, such as Euonymus japonicus / Lonicera nitida / Duranta, 30–45 cm height, including preparation of planting trench, supply of good earth/FYM, planting at close spacing, watering, trimming and establishment complete. |
| 22 | Providing and planting flowering perennial plants, such as Lavender, Salvia, Coreopsis, Gaura and similar approved varieties, including bed preparation, supply of compost/FYM, planting at required spacing, watering and maintenance complete. |
| 23 | Mechanical Part |
| 24 | SITC of Circular Ring manifold of nominal diameter 12 feet fabricated out of 65 mm nominal bore (DN65 / 2.5\\" outer diameter) Class B G.I pipe, complete with 36 Nos. precision TIG-welded threaded sockets (12mm) and nipples spaced at uniform intervals of approximately 12 inches (305 mm) along the pipe crown, dual bottom-inlet connections (65 mm NB flanged/union type) disposed 180° apart for balanced water distribution, end caps, drain plugs, and structural base mounting feet; complete with all gasket joints, fasteners, as per directions of the Engineer-in-Charge. |
| 25 | Supply,Installation, Testing and Commisioning of 12 mm inlet x 8 mm Outlet Orifice and 150mm Long Jet Nozzle with inbuilt angle adjustment Ball Joint and LED in IP68 rating, Made in High Quality Brass/ Gunmetal (Chrome Plated) of approved Make or as Per EIC suitable for attaining a water jet height of 8-10 feet. The assembly consists of Suitable size Gate Valve / Ball Valve and Nipple along with all accessories. |
| 26 | Providing, supplying, fixing, testing and commissioning of Diamond Jet fountain nozzle, complete with multiple water jets arranged at precise angles to produce a decorative crisscross diamond-shaped water pattern, having threaded inlet connection of 1.5\\" at the base, suitable for connection with submersible fountain pump, including all necessary fittings, connectors, clamps, supports and accessories required for proper installation and satisfactory operation, complete as required and as directed by the Engineer-in-Charge. The assembly consists of Suitable size Gate Valve / BallValve along with all accessoriesHeight of water stream not less than 10 ft. etc. complete as required. |
| 27 | Supplying, laying, jointing, fixing, testing, and commissioning of heavy-duty pressure piping from the pump to the fountain basin manifolds, including required bends, tees, reducers, unions, |
| 28 | 80 mm nominal bore (DN80 / 3\\") Class B G.I pipe for outer ring feed line. |
| 29 | 65 mm nominal bore (DN80 / 3\\") Class B G.I pipe for outer ring feed line. |
| 30 | 50 mm nominal bore (DN50 / 2\\") Class B G.I pipe for Diamond Jet fountain nozzle. |
| 31 | Submersible Pump - 5 HPSupplying, installing, testing and commissioning of 5 HP, 3-phase, 415 V, 50 Hz, 2900 RPM, single stage, openwell submersible pump set, complete with cast iron impeller, cast iron delivery casing and motor body, stainless steel pump shaft, 80 mm suction and 65 mm delivery connections, suitable for a head range of 10 to 25 metres and discharge of 8 to 15 litres per second, including all necessary accessories, fittings, clamps, fasteners, connection arrangements and other components required for satisfactory operation, complete as required and as directed by the Engineer-in-Charge. |
| 32 | Submersible Pump - 2 HPProviding, supplying, installing, testing and commissioning of 2.0 HP, 3-phase, 415 V, 50 Hz, 2840 RPM, openwell submersible pump set, complete with 65 mm suction and 50 mm delivery connections, suitable for openwell installation, capable of delivering 6.9 to 11.0 litres per second against a head range of 8 to 14 metres, with cast iron impeller, cast iron delivery casing and cast iron motor body, stainless steel pump shaft, complete with strainer and all necessary accessories required for proper installation, testing and satisfactory commissioning of the complete pump set, as directed by the Engineer-in-Charge. |
| 33 | Makeup water pump:Providing, supplying, installing, testing and commissioning of 1.0 HP, single-phase, 210 V, 50 Hz, 2700 RPM, single-stage monobloc pump set, complete with 50 mm suction and 50 mm delivery connections, suitable for surface installation, capable of delivering 1.4 to 6.5 litres per second against a head range of 6.0 to 12.4 metres, with cast iron/Noryl impeller, cast iron delivery casing and cast iron motor body, carbon steel pump shaft and mechanical seal, ISI marked, complete with all necessary accessories required for proper installation, testing and satisfactory commissioning of the complete pump set, as directed by the Engineer-in-Charge. |
| 34 | Supplying, installation, testing, and commissioning of LED spotlights having an ingress protection rating of IP-68, constructed with electropolished die-cast SS-304 / SS-316 housing, 8 mm to 10 mm thick toughened tempered safety glass lens, high-grade silicon sealing gasket, equipped with high-power 4-in-1 RGBW LEDs of total power rating 18W to 27W operating on 24V DC constant voltage, complete with adjustable mounting bracket clamped to the 15 ft ring header pipe, and factory-potted submersible cable of minimum 3.0 m length. |
| 35 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 36 | 80 mm dia |
| 37 | 65 mm dia |
| 38 | NON RETURN VALVE cast Iron double flange as per IS/5312 PN 1.6 rating complete with Bronze body & wedge Stainless Steel spindle, Gland packing, Rubber gasket |
| 39 | 80 mm NB |
| 40 | 50 mm NB |
| 41 | Providing, Supplying and Installing of ball valve,complete with all necessary fittings, accessories and leak-proof connections, as directed by the Engineer-in-Charge. |
| 42 | 50mm dia |
| 43 | P/F of Water Strainer made up of SS Mesh including for flanges, nut bolts and other accessories 80-100 mm dia |
| 44 | Plumbing ( Piping) Work : Supplying and Fixing of PPR(Poly Proplyene Random-copolymer) Pipe in size , 50mm, of reputed make confirming to ISO 15874 or equivalent. All fixing to be done to the entire satisfaction and as approved by Engineer-In-charge. The job includes the cost on account of tools tackles/ labour /accessories/fittings/valves.PN: Suitable to handle the pump pressure. |
| 45 | Electric |
| 46 | Supply, Installation, Testing & Commissioning of Heavy Duty VFD (Variable Frequency Drive) Panel of rating 5 HP or Suitable for the Submersible Pump, of standard make to generate slow motion effects. Make reputed. |
| 47 | Supply,Installation, Testing and Commissioing of ,Master Control Panel with microprocessor/microcontroller for generating various patterns for Water Jets and Lights with Programmable/Code based technology with dmx Protocol |
| 48 | SITC of DC Programmable SMPS controller for LED lights with output 12V DC & minimum of 1.5 kW capacity. |
| 49 | Supply and fixing of Slave Units for run LED Lights, Body - ABS, Input Power - 12V DC, Output Power - 12V DC, complete as per the direction & entire satisfaction of Engineer in charge. |
| 50 | Structural steel work (Welded) in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by EIC. |
| 51 | Supplying and fixing of maintenance-free chemical earthing system with Electrode Type GI Rod, Electrode Length 3 m, Electrode Diameter 50 mm, Copper Coating 150 µm, with terminal arrangement on top including copper strip/lug for termination. The electrode shall be surrounded with backfill compound (BFC) like bentonite/graphite compound in a bore hole of 100 mm to 150 mm diameter. The complete system shall have a resistance of less than 1 ohm when tested. It shall be installed complete with watering arrangement, PVC cap, funnel, and masonry chamber with CI cover of appropriate size.Earth resistance to be maintained below 1 Ω and tested using clamp-type earth tester after installation. |
| 52 | GI Strip of following sizes 25 x 6 mm G |
| 53 | Supplying, laying, testing and commissioning of PVC aluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments of reputed standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 54 | 4 Core x 35 Sq mm |
| 55 | Supplying & fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked with metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required. |
| 56 | 4 Core × 4 sq.mm for (5 H.P Motor) |
| 57 | 4 Core × 2.5 sq.mm for (2 H.P Motor) |
| 58 | Providing and laying of 2C x 2 sq.mm copper wire, FR/FRLS PVC insulated, complete with necessary accessories, for phase and neutral supply to 1 HP single-phase water-feeding pump |
| 59 | Supply/ Laying Wiring of Cable two core 1.0 sq mm copper conductor PVC insulated. The Job also includes the Conduit of suitable size. |
| 60 | Supplying and Fixing of Following sizes of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required. |
| 61 | 25mm PVC Conduit |
| 62 | SITC of 100 A Three Phase Control Panel including 100 A 4 Pole MCCB, C/O Switch, Alumunium Bus Bar, Voltmeters, Ammeters, Switch-gear. The Panel shall be Fabricated of cubical construction, floor / wall mounted type, fabricated out of 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade. The Job also includes foundation of suitable size.The Outhgoing shall have 1.Outgoing Feeder for cummilative 5 HP Pump compatible with VFD starter.2.Outgoing Feeder for cummilative 2 HP pump with suitable starter.3.Outgoing feeder for makeup water pump - cummilative 1 HP with suitable starter.4.Feeder suitable for Fountain Lighting.4.Auxillary Feeder (Blank)The panel shall automatic duty/standby logic Controller for operation of Main Mono-block pumps (5 HP / 2 HP).The Job also includes complete earthing of all equipment. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender