Tender for Tender for Construction Of Minor Bridge 5X6x4 Mtr Span And Approach Road On Nh-135 To Pagar Chitang Kothi Road In District Mirzapur Construction Of Minor Bridge
Tender Value
2.18 Crore
Estimated cost
Bid Submission
25 Sep 2026
9 days left
EMD
12.90 Lakhs
Bank guarantee accepted
Document Fee
2720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mirzapur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Minor Bridge 5X6x4 Mtr Span And Approach Road On Nh-135 To Pagar Chitang Kothi Road In District Mirzapur Construction Of Minor Bridge
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling reinforeed cement concrete or reinforced brick work including stcking of dismantled materials as directed by Egnineer-in-charge within a distance of 60 meters (200 feet). SI No. 692 |
| 2 | Running of 5HP for dewatering including arrangement of pump suction and delivery pipes and other accessories at site including cost of POL. SI No. NS Page No. 55 |
| 3 | Excavation in foundation in Hrad Rock Soil including all labour T&P Royalty etc. all complete. SI No. 253 & 254 |
| 4 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth sheel roller to achive the desired density, complete as per Technical Specification Clause 401. |
| 5 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 ( PCC grade- M 10 ) (Nominal Mix 1:3:6) |
| 6 | Providing concrete for reinfoced Cement concrete in sub structure as per drawings and technical specification clauses R.C.C. Grade M 20 |
| 7 | Providing concrete for reinfoced Cement concrete in sub structure as per drawings and technical specification clauses R.C.C. Grade M 30 |
| 8 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications |
| 9 | Providing & fixing weep holes as per MORD 600 12.90 abutment wing wall, Retarning wall |
| 10 | Providing and laying of Filter media with granuler materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRT&H Specifications to a thickness of not less then 600 mm with smaller size towards the soil and bigger size towards wall and provided over the entire surface behind abutment, wing wall and return wall to the full hight compacted to a firm condition complete as per drawing and technical specifications. MORD 1200 |
| 11 | Making Lanching Approan including cost of stone bolder all labour and T&P. Etc and including all taxes with trade tax etc. Required for propep completion of the work SI No. 2503 |
| 12 | Earth work in embankment in moorum mixed/black cotton soil. Excavation to be in the form of regular pits not exceeding 0.5 m in depth and earth work in embankment to be in 20 cm layers including ramming & dressing the surface to raquired level and slope and also i/c 1.5m lift and 30m lead (Cartage Rate km-1) |
| 13 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth sheel roller to achive the desired density, complete as per Technical Specification Clause 401. |
| 14 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. |
| 15 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 16 | Brick edging on both side of roads of straight over burn brick class 275[8.00cm(3\\")wide & 12 cm (4.50\\")] deep laid with mud mortor icluding labour & supply of bricks finished to requared templete and in proper alignment and also including dressing & ramming the exacavated earth as directed by the E/I |
| 17 | Providing and applying primer coat with bitumen Emulsion(SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 18 | Providing and applying tack coat with Bitumen VG-10) using Bitumen distributor at the rate of 0.30kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 19 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508. |
| 20 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 |
| 21 | Providing 1000mm dia N.P-3 H.P. jointing with coller in proper position including cost of cement , jute etc. required for proper completion of work. Pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender