Tender For Electrification Work Of Type-V Quarters At Jal Vihar Colony.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
14300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrification Work Of Type-V Quarters At Jal Vihar Colony.
BOQ
| Sl. No. | Item Description |
| 1 | Electrification work of Qtr. No. 1 old Type-V & Qtr. No. 9 New Type-V at Jal Vihar Colony allotted accommodations to Sr. Bureaucrats of Govt. of NCT of Delhi by carrying out complete work as per following:-:-1.10Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel / PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.1.10.2 - Group – B. |
| 2 | 1.14.2Wiring for circuit / sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel / PVC conduit as required.2x2.5 sq. mm + 1x2.5 sq. mm earth wire. |
| 3 | 1.14.3Wiring for circuit / sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.2x4 sq. mm + 1x4 sq. mm earth wire. |
| 4 | 1.14.5Wiring for circuit / sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.2x10 sq. mm + 1x6 sq. mm earth wire. |
| 5 | 1.32Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 6 | 1.34Supplying and fixing brass batten / angle holder including 8connection etc. as required. |
| 7 | 1.25Supplying and fixing single module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 8 | 2.4Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door |
| 9 | 2.10.1Supplying and fixing 5 amps to 32 amps rating, 240/415 volts 10 kVA ‘C’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. |
| 10 | 2.10.5Supplying and fixing up to 63 amps rating, 240/415 volts 10 kVA ‘C’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral |
| 11 | 1.41Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 12 | 1.44/8 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length upt 30cm with 1.5 Sq. mm FRLS PVC insulated, copper conductor single core etc. as required. |
| 13 | 1.50Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 14 | 1.35Installation, testing, commissioning of wall bracket / ceiling fittings of all sizes consisting two GLS/CFL/LED lamps per fitting complete will all accessories. |
| 15 | 1.24.7Providing / fixing TV Antenna socket outlet. |
| 16 | 1.38Supply & fixing of call bell buzzer suitable for single phase 230 volt complete as required. |
| 17 | 1.33Supplying & fixing 3 pin 5 Amp. Ceiling rose in the existing junction box wooden block i/c connection. |
| 18 | 5.2Earthing with GI earth pipe 4.5 Meter long 40mm dia i/c accessories & providing masonry enclosure with cover plate having locking arrangement & watering pipe etc. with charcoal / coke & salt as required. |
| 19 | 5.12Providing & fixing 6 SWG dia GI wire earth connection from earth electrode in 15mm dia GI pipe i/c connection with GI thimble excavation & refilling as required. |
| 20 | Providing 0.5 HP Pressure booster pump, single phase, 220 Volts size 25mm x 25mm. Make:- Kirloskar / Crompton / OEM. |
| 21 | Providing of exhaust fan 12” size high speed metallic. Make:- Havells / Crompton / Phillips / Bajaj. |
| 22 | Providing of wall surface mounted LED fancy light fixture suitable for 30 watt spiral / pins type LED. Make:- Havells / Crompton / Phillips / Bajaj. |
| 23 | Providing of LED bulb (warm white) 15 watt. Make:- Havells / Crompton / Phillips / Bajaj. |
| 24 | Providing of LED bulb (warm white) 7/9 watt. Make:- Havells / Crompton / Phillips / Bajaj. |
| 25 | Providing of bulk head light for LED wall mounting metallic body 15/20 watt bulb. Make:- Havells / Crompton / Phillips / Bajaj. |
| 26 | Dismantling charges & making good the surface etc. as per both site requirement of work to be carried out. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender