Tender For Construction/ Installation Of Gauge Plates On Doodganga Nallah At Barzullah/ Aluchi Bagh, Tailbal Nallah At Tailbal, River Jhelum At P Ore, Gagaldara Nallah At Aripanthan And Removal/ Refitting Of Old Gauge Plates With Fpr Plates On Variou
Tender Value
2 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
12 days left
EMD
4000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction/ Installation Of Gauge Plates On Doodganga Nallah At Barzullah/ Aluchi Bagh, Tailbal Nallah At Tailbal, River Jhelum At P Ore, Gagaldara Nallah At Aripanthan And Removal/ Refitting Of Old Gauge Plates With Fpr Plates On Various Gauge And Discharge Sites Of P&D Sites Sub-Division Srinagaradv Cost: - Rs.2.00 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 2 | Extra rates for quantities of works executed In or under water and/ or liquid mud, including pumping out water as required. |
| 3 | Dumping stone excluding cost of stones. in Horizontal on level |
| 4 | Supply of stones |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 8 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | Removing of old guage plates including earth work in excavation (whenever required) and fixing/ supply of guage plates of fibre glass reinforced plastic (FRP) 5mm thick sheet very sturdy both sides, gel coat finish composite material, sandwich with MS Strip by contact moulding process, engraved moulded bandwidth and figures wih computerized guage marking with reflective radium pasting, spray lamination with polyurethane chemical for surface protection including cost of nuts and bolts and geyser bolts, welding/ drilling of holes wherever required including all types of carriages upto site of work including necessary arrangements of boats, ladders and returning of damaged rotten guage plates to divisional store complete job at various Guage and discharge sites of different stages (LMR rate) |
| 10 | Extra for laying concrete in or underwater and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Carriage of materials by means of mechanical transport from source upto acual site of work including loading, unloading and stacking of materials at site:Stones avg lead 5km |
| 15 | 40mm aggregate avg lead of 5Km |
| 16 | 20mm aggregate avg lead of 5Km |
| 17 | Sand avg lead 05km |
| 18 | Cement avg lead of 02 km |
| 19 | Steel Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender