Tender For Procurement Of Sewing Machineries

Sharing tender

Tender for Procurement Of Sewing Machineries , Chain Stitch Machine • Machine Type - Chain Stitch Sewing Machine • Stitch Type- Chain Stitch • Number Of Threads- 1, 2 Or 3 Threads, Depending On Machine • Needle- Single Needle / Special Chain-Stitch Needle • Maximum Sewing Speed- 3,000-6,000 Stitches/Min • Stitch Length- Approximately 1-5 Mm, Adjustable • Needle Bar Stroke- Approximately 30-35 Mm • Presser Foot Lift- Approximately 5-7 Mm • Bed Type- Flat-Bed Or Cylinder-Bed, Depending On Application • Feed Mechanism- Drop Feed / Differential Feed Depending On Model • Motor- Servo Motor, Typically 400-750 W • Power Supply- 220-240 V, Single Phase • Lubrication- Automatic Or Manual, Model Dependent • Application- Garments, Knitwear, Underwear, Hemming, Joining And Decorative Seams • Machine Material- Heavy-Duty Cast Iron/Industrial Frame • Suitable Fabrics- Light, Medium And Knitted Fabrics • Stitch Formation- Thread Loop Is Formed Below The Fabric And Interlinked With The Next Stitch , Top And Bottom Cover Stitch Machine(Flat Lock Stitch) • • Machine Type- Top & Bottom Cover Stitch Machine • • Stitch Type- Cover Stitch / Chain Stitch • • Needles- 2 Or 3 Needles • • Threads- 3, 4 Or 5 Threads, Depending On Configuration • • Needle Arrangement- Multi-Needle • • Maximum Sewing Speed- 4,000-6,000 Stitches/Min • • Stitch Length- Approximately 1.4-4.4 Mm, Adjustable • • Needle Gauge- Typically 2.5-6.4 Mm • • Feed Mechanism- Bottom Feed; Differential Feed Where Provided • • Top Cover Thread- Separate Top-Cover Thread Mechanism • • Looper- Bottom Cover-Stitch Looper • • Presser Foot Lift- Approximately 5-7 Mm • • Lubrication- Automatic/Semi-Automatic Lubrication • • Motor- Servo Motor / Direct-Drive Motor • • Motor Power- Typically 400-750 W • • Power Supply- 220-240 V, Single Phase • • Bed Type- Flat-Bed • • Fabric Type- Knitted, Stretch And Medium-Weight Fabrics • • Stitch Adjustment- Stitch Length And Differential Feed Adjustment • • Thread Trimming- Available In Advanced Automatic Models • • Needle Cooling- Available In Some High-Speed Models , 5 Thread Over Lock Machine • Machine Type 5-Thread Overlock / Safety Stitch Machine • Number Of Threads 5 • Needles 2 Needles • Loopers 3 Loopers • Stitch Type 2-Thread Chain Stitch + 3-Thread Overedge Stitch • Maximum Sewing Speed 5,000-7,000 Stitches/Min • Stitch Length Approximately 1.0-4.0 Mm, Adjustable • Overedge Width Approximately 3-6 Mm, Depending On Model • Needle Gauge Typically 3.2-5.6 Mm • Differential Feed Available; Adjustable • Presser Foot Lift Approximately 5-7 Mm • Lubrication Automatic Lubrication • Motor Servo Motor / Direct-Drive Motor • Motor Power Typically 550-750 W • Power Supply 220-240 V, Single Phase • Bed Type Flat-Bed • Thread Trimming Available In Automatic Models • Fabric Thickness Light To Medium/Heavy Fabrics, Depending On Model • Suitable Fabrics Woven And Knitted Fabrics , Straight Knife Cutting Machine • Machine Type- Straight Knife Fabric Cutting Machine • Knife Type- Vertical Straight Reciprocating Knife • Knife Height- 6-12 Inch (150-300 Mm), Depending On Model • Cutting Capacity- Up To Approximately 150-300 Mm Fabric Lay, Depending On Fabric • Knife Stroke- Approximately 20-40 Mm • Knife Speed- Approximately 3,000-4,000 Strokes/Min • Motor Power- 0.5-1.0 Hp (Approximately 400-750 W) • Motor Type- Electric Motor • Power Supply- 220-240 V, Single Phase • Base Plate- Steel/Aluminium Base Plate With Smooth Surface • Sharpening System- Built-In Automatic/Semi-Automatic Knife Sharpener • Knife Lubrication- Automatic/Manual Lubrication, Depending On Model • Handle- Ergonomically Designed Operating Handle • Safety Device- Knife Guard And Safety Switch • Cutting Direction- Forward And Backward Movement