Tender For Construction Of Thirumathil Wall And Cut Stone Flooring In Arulmighu Thirunageswaramudaiyar Thirukovil , Kalvimadai Village , Thiruchuli Taluk, Virudhunagar District.
Tender Value
23.07 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
14 days left
EMD
21600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dindigul → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Thirumathil Wall And Cut Stone Flooring In Arulmighu Thirunageswaramudaiyar Thirukovil , Kalvimadai Village , Thiruchuli Taluk, Virudhunagar District.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End |
| 2 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End |
| 3 | Supply and run of 50 mm x 50mm x 1.6mm thick MS cable mangement Tray with cover , Tees, joint plate arrangements complete with Painting by one coat of red oxide and two coats of painting of suitable colour on the Angle frame work on Stone pillar/wall |
| 4 | Supply and fixing of 1 1/2\\"X 1 1/2\\"X1/4\\" L Clamp on MS angle(0.6mx0.2m)/.MS angle extended to hold the MS cable mangement Tray |
| 5 | Supply and fixing of single box type 4'20 W LED fitting with TW round blocks on wall or celling with PVC unsheathed Copper leads from terminals to the fitting |
| 6 | Supply and fixing of single box type 4'20 W LED fitting on existing duct with PVC unsheathed Copper leads from terminals to the fitting. |
| 7 | Supply and fixing of 50W LED Low bay fitting on wall with necessary clamps with connection. Philips or equivalent |
| 8 | Supply and fixing of 7W / 9W LED bulb with battern Holder |
| 9 | Supply and fixing of 30W LED bulb with battern Holder |
| 10 | Supply and fixing of 30W LED Flood Light fitting on suitable AI Frame LED on wall with necessary clamps with connection. Philips or equivalent (as per Department Engineer Instruction) |
| 11 | Supply and fixing of 50W LED Flood Light fitting on suitable AI Frame LED on wall with necessary clamps with connection. Philips or equivalent |
| 12 | Supply and fixing of 2 nos 30 W LED street light fitting (Lower end) on the existing post with PVC unsheathed FRLS copper leads with MS clamps and with SMC Box with 2 No 6 Amps SP MCB & Connector and necessary Connection with Painting. |
| 13 | Supply and fixing of 2 nos 60W LED (Lower end) street light fitting with with 25mm dia. GI pipe (class B) with 2 no.25mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with SMC Box with 2 No 6 Amps SP MCB & Connector and necessary Connection. |
| 14 | supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall l with PVC unsheathed FRLS copper leads with MS clamps and with painting |
| 15 | Supply and fixing of 300W LED Flood Light fitting on Existing Minimast with necessary clamps with connection. Philips or equivalent |
| 16 | Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp |
| 17 | Supply and fixing of 375mm (15\\") sweep (heavy duty) AC exhaust fan complete without provision of holes in the wall |
| 18 | Supply and fixing of louvers shutters arrangements for 375mm (15\\") sweep light duty AC Exhaust fan |
| 19 | Supply and fixing of 8 nos of 5A flush type one module switch in 1 no 8 module (2 row x 4) Surface box with 1 no 8 module cover plate on wall with connections Lower end |
| 20 | Supply and fixing of 1 no.6A two module 3 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Lower End |
| 21 | Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Lower End |
| 22 | Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Lower End |
| 23 | Supply and fixing of 20Amp MC plug with 3 pin Top for AC unit on wall with earth connection complete |
| 24 | Supply and fixing of 20A Double pole MCB in sheet steel enclosure on wall with necessary earth connection. (The MCB and metal enclosure should be of Higher End).( for Ac control) |
| 25 | Supply and fixing of industrial type socket with 32A 3P +N+E 5 Pin industrial type socket with 32A FP MCB in enclosure box on MS sheet on the Existing pillar/Wall with connection complete. |
| 26 | Supply and fixing of Douple pole sheet steel enclosure with 1 no 40 A DP MCB on wall and necessary connection for light control |
| 27 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB as incoming and 3 nos. 6A to 32A TP MCB 3 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Lower End |
| 28 | Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 32A 4P MCB as incoming and 12 Nos 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with Earth connection only. Lower End |
| 29 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Lower End( |
| 30 | Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in existing Duct / existing PVC Pipe. |
| 31 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. |
| 32 | Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 33 | Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection. |
| 34 | Supply and run of 2 o f 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4sq.mm copper wire with painting of suitable colour |
| 35 | Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 36 | Supply and clamping of 4X16 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps. |
| 37 | Supply and fixing of brass cable gland for 4 x 16 sq.mm. PVC armoured LTUG cable with earth connection |
| 38 | Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good |
| 39 | Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 40 | Supply and fixing of brass cable gland for 4 x 25 sq.mm. LTUG armoured cable with earth connection |
| 41 | Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 42 | Supply and clarnping of 3-1/2 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 43 | Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection |
| 44 | Supply and providing cable end termination of 3-1/2 x 25sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete |
| 45 | Supply and Run of 4 of 16 sq.mm (101/0.45) PVC insulated SC sheathed copper conductor of 1100 V grade on 7/20 GI wire for service connection mains |
| 46 | Supply and Run of 4 of 16 sq.mm (101/0.45) PVC insulated SC sheathed copper conductor of 1100 V grade in 25mm dia GI pipe (class B ) suitably bent at both ends with necessary angle iron upright and end support for service connection mains |
| 47 | Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only |
| 48 | Providing Feeder pillar box comprising of 0.90m x 0.45m x1.20m with 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB as incoming and 6 nos. 6A to 32A SP MCB & 2 nos 16A TP MCB as outgoing on suitable angle iron frame |
| 49 | Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth |
| 50 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry |
| 51 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection |
| 52 | Sub total |
| 53 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender