Tender For Work Of Installation Of Air Conditioning Plants And Electrical Installation In The Court Rooms And Rest Rooms Of Additional District Judges Located In The Premises Of District Court Fatehpur.
Tender Value
96.68 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
2 days left
EMD
6.84 Lakhs
Bank guarantee accepted
Document Fee
2354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Work Of Installation Of Air Conditioning Plants And Electrical Installation In The Court Rooms And Rest Rooms Of Additional District Judges Located In The Premises Of District Court Fatehpur.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotarycompressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 52 0C (out door ambient temperature). 1.5 TR with 5 Star BEE Rating. (Make: Carrier,Panasonic, Blue Star, L.G. or equivalent). MR |
| 2 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS/International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 52 0C (out door ambient temperature). 2.0 TR with 5 Star BEE Rating Inverter Type Cooling. (Make: Carier,Panasonic, Blu Star, L.G. equivalent) MR |
| 3 | SITC of 4 KVA Automatic Voltages Stablizer (130-280 V)Copper winding. MR |
| 4 | SITC of 5 KVA Automatic Voltages Stablizer (130-280 V)Copper winding. MR |
| 5 | S/L of 4 Core 2.5 Sq mm Size Copper Cable Connection indoor to Outdoor Unit Complete in all respect. MR |
| 6 | S/F Outdoor Stand For Outdoor Unit Split AC Complete in all respect. MR |
| 7 | SITC of Suction/Discharge Copper pipe line in split A.C. Unit 1.5 Ton Capacity including brazing, nitrile, rubber insulation 6mm thick class 'O' etc complete 1/4\\" (6.40 mm) and 1/2\\" (12.70 mm). MR |
| 8 | SITC of Suction/Discharge Copper pipe line in split A.C. unit 1.8/2.0 ton capacity including brazing, nitrile rubber insulation 9mm thick class 'O' etc complete 3/8\\" (9.50 mm) and 5/8\\" (15.90 mm). MR |
| 9 | S/I of Heavy duty PVC plastic braided 20mm OD flexible pipe for condensed water drain with clipping accessories complete in all respect. MR |
| 10 | S/L of 3 Core 2.5 Sq mm Size Copper Cable Connection indoor Unit to Stablizer Complete in all respect. MR |
| 11 | Supply , fericationand installation of M.S. cage for protection of outdoor unit from animal/theft L X W X H 1300 mmX 600 mm X 1200 mm complete in all respect. MR |
| 12 | Supply, Installation, Testing amd Commissioning of LT Panel vermin proof floor mounting , M.S. channel base with bottom and Fabricated out of 2.0/1.6mm thick CRCA sheet steel, painted with powder coated paint of shade as per the direction of Engineer In-Charge after proper sheet treatment process of sheet steel. The Bus Bar of panel shall be of Electrical grade High Conductive Aluminum alloy of appropriate cross section as per rating.The main bus bar shall run throughout the panel of rating as main incomer rating. The Bus Bar shall be supported by non hygroscopic SMC/DMC Bus Bar supports which shall be mounted on proper interval to ensure the bear the jerks of short Circuit of 50kA for panels having ACB as Incomer & 36kA for panels having MCCB Incomers. Panel shall be constructed in fully Segregated Compartment Design for Each Feeder as per 3b construction Format. The Panel shall be completed in all respect as per IS: 8623 Part-2&3. There shall be Separate Metering Compartment for incomer metering and outgoing meteringAll Incomer Feeders shall be provided with Multifunction Metering along with Phase Indicating Lights and other associated components such as CT, control MCB Terminal Block etc. and all Outgoing Feeders 100A & above shall be provided with 3 phase Ammeter along with phase Indicating Lights and other associated components such as CT, control MCB Terminal Block etc. The Feeders above shall be provided ac accommodated all Measuring Instruments shall be Digital type & all Indicating Lights shall be LED type. Wiring shall be done from 1100V Grade PVC Insulated copper flexible wire. All ACB shall be Electrically operated Draw-out type with Microprocessor Based O/L, S/C & E/F Release of Breaking/ Withstand Capacity (ICU/ICs/Icw) 50kA or more All MCCB shall be Thermal Magneetic /Microprocessor with O/L & S/C Protection along with Required Spreaders & Extended Rotary Handle with pad Locking facility of Breaking capacity (ICU/ICS) 36kA or more All MCB shall be Thermal 10kA 'C' Curve. Cubicle type switch board shall be Cat- B only. |
| 13 | a. Incoming: 630 Amp. FP 36 ka MCCB, Outgoing of 200 Amp. FP 36 kaMCCB 3 No's , 100 Amp. FP36 ka MCCB 1 No & 63 Amp.FP36 ka MCCB 1 No. DSR No. A.R. |
| 14 | b.Incoming : 200 Amp. FP MCCB , Outgoing of 63 Amp.FP MCCB 3 No's. DSR No. 22.1.2(b) |
| 15 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. DSR No. 2.18 |
| 16 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR No. 2.10.1 |
| 17 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 18 | a. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire. DSR No. 1.14.5 |
| 19 | b. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. DSR No. 1.14.4 |
| 20 | c. 2 X 16 sq. mm + 1 X 6 sq. mm earth wire. DSR No. 1.14.6 |
| 21 | d. 4 X 16 sq. mm + 1 X 6 sq. mm earth wire. DSR No. 1.14.11 |
| 22 | Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) DSR No. 2.5.1 |
| 23 | Supplying and fixing 8 way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). DSR No. 2.3.2 |
| 24 | Supplying and fixing 12 way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) DSR No. 2.3.3 |
| 25 | Supply and laying (underground) of Aluminium Conductor PVC insulated armoured served sheathed cables 1100V of following sizes:- |
| 26 | (a) 400 sq. mm 3-1/2 core. DSR No. 20.1.20 |
| 27 | (b) 300 sq. mm 3-1/2 core. DSR No. 20.1.19 |
| 28 | (c) 120 sq. mm 3-1/2 core. DSR No. 20.1.15 |
| 29 | Supply and laying (on wall surface) of Aluminium Conductor PVC insulated armoured served sheathed cables 1100V of following sizes:- |
| 30 | (a) 70 sq. mm 3-1/2 core. DSR No. 20.1.13 |
| 31 | (b) 95.0 sq. mm 3-1/2 core. DSR No. 20.1.14 |
| 32 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 33 | (a) 400 sq. mm 3-1/2 core. DSR No. 11.1.31 |
| 34 | (b) 240 sq. mm 3-1/2 core. DSR No. 11.1.31 |
| 35 | (c) 150 sq. mm 3-1/2 core. DSR No. 11.1.31 |
| 36 | (d) 95 sq. mm 3-1/2 core. DSR No. 11.1.31 |
| 37 | (e) 70 sq. mm 3-1/2 core. DSR No. 11.1.31 |
| 38 | (f) 50 sq. mm 3-1/2 core. DSR No. 11.1.31 |
| 39 | (g) 35 sq. mm 3-1/2 core. DSR No. 11.1.31 |
| 40 | Earthing with copper earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. DSR No. 5.6 |
| 41 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. DSR No. 5.4 |
| 42 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. DSR No. 5.14 |
| 43 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. DSR No. 5.15 |
| 44 | S/F of 100 A FP MCCB without enclosure complete in all respect. A.R |
| 45 | S/F of 63 A FP MCCB without enclosure complete in all respect. A.R |
| 46 | S/F of 63 A DP MCB without enclosure complete in all respect. A.R |
| 47 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge |
| 48 | (a) 6.0 sqmm. QR |
| 49 | (b) 10.0 sqmm. QR |
| 50 | (c) 70.0 sqmm. QR |
| 51 | (d) 95.0 sqmm. QR |
| 52 | (e) 120.0 sqmm. QR |
| 53 | (f) 150.0 sqmm. QR |
| 54 | (g) 240 .0 sqmm. QR |
| 55 | (h) 300.0 sqmm. QR |
| 56 | (i) 400.0 sqmm.QR |
| 57 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender