Tender For Construction Work Of Tin Shed And Platform For Public Sitting At A Public Place Near The Pond In Village Mahobakanth Of Development Block Panwadi.
Tender Value
13.76 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
13800
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Tin Shed And Platform For Public Sitting At A Public Place Near The Pond In Village Mahobakanth Of Development Block Panwadi.
BOQ
| Sl. No. | Item Description |
| 1 | clearing of jungle including up rooting of trunk vegetarian grass bushetc DSR 2.32 |
| 2 | Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift:D.S.R Code No-2.8.1 |
| 3 | Earthwork in cutting or filling in ordinary soil form 5k.m.i/c all complete work |
| 4 | Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.DSR.2.27 |
| 5 | P/L in position cement concrete of specified grade excluding the cost of Centering and shuttering all work upto plinth level 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from Natural sources:8 graded stone aggregate 40 mm nominal size derived from Natural sources .D.S.R Code No-4.1.8 |
| 6 | M-150 brick work in 1:6Cement & C. Sand Mortar in Foundation and plinth…Complete Item. D.SR-6.1.2 |
| 7 | 12 mm cement plaster thick 1:4 cement and coarse sand fair side single and half brick wall including internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth. DSR No-13.4.1 |
| 8 | Providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600 mm x600 mm size in flooring or skirt ing laid with 1:3 cement mortar (1 cement :3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T &P required for proper completion of work. DSR .11.41.2 |
| 9 | Providing and laying in position specified grade of reinforcement cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement of R.C.C 1:1.5:3 with cement coarse sand .column T beam slab as DSR NO-5.1.2 |
| 10 | M.S (Tor steel or plain ) in plain work such as R.C.C or R.B work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item.DSR 5.22.1 |
| 11 | Cement concrete floorig 1:2:4 ( 1 cement 2 coarse sand 4graded stone aggregate) finished with a floating coat of neat cement,including cement slurry,excluding the cost of nosing of steps etc complete 40 mm thick with 20 mm nominal size stone aggregate DSR.11.3.1 |
| 12 | Steel work inbuilt up Tubular(round,square or ractangular hollow tubes etc) Trusses etc including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer including welding and bolted with with special shaped washers etc all complete.DSR-10.16.2 |
| 13 | S/F Of MS J-hook 16 mm dia i/c all complete work |
| 14 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(0.63 mm thick sheet) DSR.12.1.3 |
| 15 | Finishing walls with two coat of Premium acrylic emulsion smooth exterior paint of best quality supply of all materials,labour and T&P etc DSR NO 13.48.A.1 |
| 16 | Painting with synthatic eleamin Paint of Approved and manufactore of reqquierd colour to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture DSR.13.62.1 |
| 17 | Clearence of site after com. The work |
| 18 | S/F of 4x2.5 feet size granite stone at site including writing etc complete in all respect Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender